Grace Bio-Labs Secure Seal User manual

1
|Instructions for Use |
Secure Seal™Imaging Spacers
APPLICATION
1. Trim to size using a razor blade or scissors (if desired) as shown in figure 1.
Figure 1
2. Use a forceps to remove the adhesive liner from one surface as shown in Figure 2.
Figure 2
3. Apply the spacer, adhesive side down onto the surface of a glass slide or coverslip as shown in
Figure 3. Press gently to seal.
Figure 3
4. Remove the other adhesive liner as shown in Figure 4.
Note: To increase chamber depth, add multiple spacers.
Figure 4

2
|Instructions for Use |
Secure Seal™Imaging Spacers
5. Add the specimen as shown in Figure 5.
Figure 5
6. Add the mounting medium as shown in Figure 6.
Figure 6
7. Add a coverslip (if desired) as shown in figure 7. Apply gentle pressure over the adhesive area to
seal.
Figure 7
8. Image