Graco slim snacker User manual

Slim SnackerTM
Owners Manual
Graco PD284070B 10/14

Failure to follow these warnings and the
assembly instructions could result in serious injury or death.
•PLEASE SAVE OWNER’S
MANUAL FOR FUTURE USE.
•ADULT ASSEMBLY REQUIRED.
•NEVER LEAVE CHILD
UNATTENDED. Always keep
your child in view.
•PREVENT SERIOUS INJURY
OR DEATH FROM FALLS OR
SLIDING OUT. Always use seat
belt. Secure your child at all
times with the restraint system
provided, in either the reclining
or upright position. The tray is
not designed to hold your
child in the highchair. It is
recommended that the highchair
be used in the upright position
only by children capable of
sitting upright unassisted.
•DO NOT FORCE TRAY
against child. Use only the three
adjustment positions. Be sure
both adjustment fingers are
engaged in armrest slots.
•STRANGULATION HAZARD:
Do not place highchair in any
location where there are cords,
such as window blind cords,
drapes, phone cords, etc.
•THIS HIGHCHAIR IS
DESIGNED TO BE USED BY
A CHILD UP TO 3 YEARS
OF AGE. Maximum weight
40 pounds (18.1 kg).
•FOLLOW ASSEMBLY
INSTRUCTIONS CAREFULLY.
If you experience any difficulties,
please contact the Customer
Service Department.
•DISCONTINUE USING YOUR
HIGHCHAIR should it become
damaged or broken.

Parts list
ALL MODELS
This model may not include some features shown below. Check that
you have all the parts for this model BEFORE assembling your
product. If any parts are missing, call Customer Service.
No tools required.

Make sure the buttons
snap into holes.
1
2
Insert “U” tube into the
rear tubes until they snap
into place.
Attaching rear legs
SNAP!
SNAP!

3
4
Make sure the buttons
snap into holes.
Insert “U” tube into the
front leg tubes.
Front legs
SNAP!
SNAP!

1
To Unfold
2

To Secure Child
5 Point Harness
1 4
5
2
3
Use slide adjuster at shoulder and
waist for tighter adjustment.
WARNING Falling Hazard: Always use the seat belt.

3 Point Buckle
To convert to 3-pt harness.
6
7
10
8
9
Use slide adjuster at waist for
further adjustment.

When changing harness strap slots, MAKE
SURE harness straps are going through
same slots in seat pad and seat back.
The harness straps must go into the
slot that is even with or slightly above
the shoulders. Avoid twisting straps.
11

Attaching Tray
1
Squeeze lever on both sides
of tray and place on chair.
SNAP!