Graco Souffle User manual

Graco PD284046D 12/14
SouffléTM
Owner’s Manual

Failure to follow these warnings and the
assembly instructions could result in serious injury or death.
•PLEASE SAVE OWNER’S
MANUAL FOR FUTURE USE.
•FOR YOUR CHILD’S SAFETY,
read the labels and the owner’s
manual before using product.
•BEFORE EACH USE. Inspect the
highchair for damaged hardware,
loose joints, missing parts, or
sharp edges.
•DO NOT USE highchair if any
parts are missing or broken.
•DO NOT substitute parts.
•FALL HAZARD Never move or
lift high chair with child in it.
•ADULT ASSEMBLY REQUIRED.
•NEVER LEAVE CHILD
UNATTENDED. Always keep your
child in view in product.
•PREVENT SERIOUS INJURY
OR DEATH FROM FALLS OR
SLIDING OUT. Always use seat
belt. Secure your child at all times
with the restraint system
provided, either in the reclining
or upright position.
The tray is not designed to hold
your child in the product. It is
recommended that the product
be used in the upright position
only by children capable of
sitting upright unassisted.
•NEVER allow a child to push
away from table.
•DO NOT FORCE TRAY
against child. Use only the three
adjustment positions. Be sure
both tray arms are engaged in
armrest holes.
•STRANGULATION HAZARD:
Do not place product in any
location where there are cords,
such as window blind cords,
drapes, phone cords, etc.
•THIS HIGHCHAIR IS
DESIGNED TO BE USED BY A
CHILD UP TO 3 YEARS OF
AGE. Maximum weight 40
pounds (18 kg).
•FOLLOW ASSEMBLY
INSTRUCTIONS CAREFULLY.
If you experience any difficulties,
please contact the Customer
Service Department.
•DISCONTINUE USING YOUR
HIGHCHAIR should it become
damaged or broken.
•PREVENT SERIOUS INJURY OR
DEATH. Do not use in motor
vehicles.
• DO NOT ADJUST the recline of
product with your child in it.
•USE ONLY Soufflé™ highchair
accessories with this product.

This model may not include some features shown below. Check that
you have all the parts for this model BEFORE assembling your product.
If any parts are missing, call Customer Service.
No tools required.
ALL MODELS
Parts list
ON CERTAIN MODELS

Press buttons in on both sides
of frame and open legs.
1
To Ajust Frame Legs
2

Open Seat
1
SNAP!
Pull calf support away from back
of seat as shown.
Note: Make sure all harness straps
are visible and not trapped under
the calf support before starting to
install the seat pad

Seat Pad
1
2
Note: Make sure all harness straps are visible and
not trapped under the calf support before starting to
install the seat pad
Attach seat pad to infant seat as
shown. Pull waist straps through
openings in seat pad.
Insert the webbing on the back of
the seat pad into the slots in the
seating area.

3
4
Pull shoulder straps and crotch
strap through openings in seat
pad.
Wrap seat pad over the top of the
infant seat.

1
Place body support on top of the
seat pad.
Pull waist straps through openings
in body support.
2Pull shoulder straps through
openings in body support.
Body Support (certain models)

Harness Covers
1Slide harness covers on shoulder
straps as shown.

Attaching Seat to Frame
1Align channel on seat with bar on
base.
WARNING DO NOT sit on frame when
the seat is not attached.
DO NOT USE frame as a foot stool.
2Align holes in side of seat into
attachment points and press down
on seat.
SNAP!