Gradient Lens Hawkeye AE-9003 User manual

Hawkeye
Angled
Eyepiece
AE-003
Hawkeye®
Angled
Eyepiece
AE-9003
USER GUIDE
USER GUIDE
Gradient Lens Corporation
GradientLensCorporation
207 Tremont Street, Rochester, New York 14608 Fax: [phone]
E-mail: [email protected]
www.gradientlens.com 1-800-536-0790
Cleaning
Use canned air to
remove dust and grit
from the window
surfaces.
Clean the windows
using a cotton swab
dampened with
Hawkeye lens cleaner,
isopropyl alcohol or
acetone.
Wipe with a dry
swab to avoid
smearing.
Flex. & Eye pc. 7/11/03 2:10 PM Page 3

Grasp the grooved
ring with your fingers
and pull it back
toward your palm.
Push the borescope’s
eyecup into the
housing and release
the locking ring.
Reverse to remove
the borescope.
Focusing
Before you couple the
AE-9003 and the
borescope, focus the
AE-9003 on a distant
object by rotating the
eyecup.Then focus the
borescope at a similar
distance to your subject.Couple them together
and make the fine focus adjustments with the
AE-9003 eyepiece.
Rotation
The eyepiece of the
AE-9003 rotates
independently of the
body (locking ring).It
may be turned over
360° without having to
turn the borescope.
HawkeyeAngled
EyepieceAE-9003
HawkeyeAngled
EyepieceAE-9003
The Hawkeye®Angled Eyepiece AE-9003
allows the user to look into a borescope
eyepiece from the side.This is useful when
there is insufficient room for the user’s head,
or the eyepiece may be inaccessible.
It will mount onto any borescope with a
standard eyecup, including the vast majority
of existing borescopes. A few models with
unique eyecups are not compatible.
Coupling to
the Borescope
Place the“corner”
of theAE-9003
against the palm of
your hand.
Flex. & Eye pc. 7/11/03 2:10 PM Page 4