Gradus Group Vello BG-C16 User manual

BG-C16
BAT TERY GRIP
Designed for the
Canon EOS 6D Mark II SLR Camera
USER’S MANUAL

Introduction
Thank you for choosing Vello, and congratulations on
your new BG-C16 battery grip purchase. Enjoy the many
benefits that a battery grip offers, such as extended
shooting time and more control and comfort when
shooting in portrait orientation.
The Vello BG-C16 is compatible with the Canon 6D
Mark II SLR camera. The BG-C16 accepts up to two
Canon LP-E6 or LP-E6N rechargeable batteries. This
grip is equipped with an alternate shutter release
button, AF area selection, AF start button, AF point
selection, AE lock button, and main dial for shooting in
a vertical position.
Please read through this entire
manual before using the B G - C16 battery
grip.
2

Precautions
1. The BG-C16 should be used only with the compatible
devices specified in this manual.
2. Use only with the batteries and battery holders
recommended in this manual.
3. Cover the power terminals with the contact cap
when the BG-C16 is not in use. This prevents
electrical shorts caused by metal objects touching
the power terminals.
4. When the battery holder is removed from the
grip, remove the batteries or place the holder in
a container to prevent electrical shorts caused by
contact with other metal objects.
5. If you notice smoke, an unusual smell, or noise from
the battery pack, discontinue use immediately.
Remove the batteries, and take the device to a Vello
authorized reseller.
6. Turn the grip power off when not shooting vertically.
7. The battery level may not display properly if batteries
are inserted before mounting the grip.
8. Remove batteries from the grip when not in use.
9. Do not attempt to disassemble.
10. Avoid water or extreme humidity, and keep in a dry
and cool place.
11. Keep out of reach of children.
12 . All images are for illustrative purposes only.
3
OVERVIEW INTRODUCTION
ASSEMBLY

Overview
12
3
5
6
7
18
9
10
8
12
17
15
14
13
16
11
4
4

1
Mounting Screw
Aligns with the camera’s tripod socket.
2Guide Pin
Helps align the camera to the grip.
3Attachment Wheel
Secures the grip to the camera.
4Battery Tray Lever
Locks and unlocks the battery
compartment door.
5DC Coupler Cord Mount
Groove for use with the Canon AC
Power Adapter (ACK-E6).
6
AF Point Selection*
7
AE/FE Lock*
8
AF Start*
9OFF/ON switch
10 Camera Battery Chamber Cover
Holder
Stores the cover when the grip is
mounted.
11 Electrical Contacts
Communicate with the camera
electronics. Keep covered when the
grip is not in use.
12
Contact Cap
Protects grip contacts.
13
Main Dial*
14 AF Area Selection*
15 Shutter Release*
16 Tripod Socket
17 Hand Strap Mount
Important! Not for use with shoulder
straps.
18 Battery Tray
Holds up to two Canon LP-E6 or
LP-E6N batteries.
* Performs the same function as on the
camera.
5
OVERVIEW INTRODUCTION
ASSEMBLY

Attaching the Grip
1. Ensure that the power is
turned off on the camera
and that the power switch
is set to OFF on the battery
grip.
2. Open the camera
battery chamber cover,
and remove the battery
from the camera battery
compartment.
3. Slide the camera battery
chamber cover’s locking
pin, as indicated above, and
remove the cover.
6

4. To prevent loss, remove the
protective cap and place the
camera battery chamber
cover into the BG-C16
battery cover holder as
indicated above. Swing the
battery chamber cover shut
so that it locks into place.
5. Connect the BG-C16 grip
to the camera.
6. Rotate the attachment
wheel in the direction
shown by the arrow until
the grip is firmly tightened.
When removing the grip, turn
the camera power off, remove
the batteries, and replace the
protective contact cap.
7
OVERVIEW INTRODUCTION
ASSEMBLY

Inserting Batteries
1. Ensure that the power is
turned off on the camera
and the grip. Use your
fingernail to flip the battery
tray lever so you can rotate
and pull as indicated above,
and slide the battery tray
out of the grip.
2. Canon LP-E6 or LP-E6N
Batteries: Insert up to
two batteries by placing
them into either slot in the
battery tray, while ensuring
the correct orientation
as shown on the tray.
Household Power Outlet:
The Canon ACK-E6
AC Power Adapter Kit
(sold separately) can be
connected to the grip. Place
the DC coupler through the
small groove on the back of
the grip. Ensure that the
battery holder doesn’t
pinch the cord.
8

3. Rotate the battery tray lever counterclockwise,
and slide the battery tray all the way into the grip.
Rotate the lever as indicated above, and push the
it back into place to lock the tray.
4. Switch the grip power to ON, and then turn on
the camera’s power. Check the battery level in
the control panel or viewfinder.
9
OVERVIEW INTRODUCTION
ASSEMBLY

Specifications
Power Source One or two Canon LP-E6 or LP-E6N rechargeable batteries.
Works with the Canon AC Adapter Kit ACK-E6.
Operating Temperature 32°F–104°F (0°C–40°C)
Dimensions (H x W x D) 4.4 × 5.8 × 3.4 in. (11 × 14.7 × 8.5 cm)
Weight 8.9 oz. (0.25 kg) excluding batteries
Specifications and design are subject to change without notice.
10

ONE-YEAR LIMITED WARRANTY
This VELLO product is warranted to the original purchaser to be free from defects in materials and workmanship
under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after
replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty
shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal
use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s)
shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves
the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER
ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Vello Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Vello along with the RMA number and proof of
purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.vellogear.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
VELLO is a registered trademark of the Gradus Group. © 2018 Gradus Group LLC. All Rights Reserved.

All other trademarks are the property of their respective owners
GG1
www.vellogear.com