Graetz GR50E8400 User manual

UHD SMART TV
GR50E8400
GR55E8400
INSTRUCTION
MANUAL
Please read this manual carefully before using, and keep it for future reference.

3.Do not install this equipment in a confined or building-in space such as a book case or similar unit, and remain a well
ventilation conditions at open site. The ventilation should not be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
4.Please refer the information on exterior bottom enclosure for electrical and safety information before installing or
operating the apparatus.
6.To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not
be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
7.The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
5.The mains plug/appliance couple is used as disconnect device, the disconnect device shall remain readily operable.
WARNING
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of non-insulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
1.To reduce the risk of electric shock, do not remove cover (or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
IMPORTANT SAFETY INSTRUCTIONS
2.The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating
and maintenance instructions in the literature accompanying the appliance.
ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
8.Never place a television set in an unstable location. A television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by manufacturer of the television set.
- Only using furniture that can safely support the television set.
- Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and television set to a suitable support.
- Not placing the television set on cloth or other materials that may be located between the television set and
supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the television set or its controls. If your
existing television set is being retained and located, the same considerations are above should be applied.
9.No naked flame sources, such as lighted candles, should be placed on the apparatus.
10.Keep a minimum distance of 5 cm around all edges of the display for sufficient ventilation.

Notes for battery disposal
The batteries used with this product contain chemicals that are harmful to the environment. To preserve our
environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries
with normal household waste. For more information, please contact the local authority or your retailer where
you purchased the product. All trademarks are the property of their respective owners and all rights are
acknowledged.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way
that it does not require a safety connection to electrical earth.
To prevent the spread of fire, keep candles or other open flames away from this product at all times.
The European Directive on Waste Electrical and Electronic Equipment (WEEE) required that old household
electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery and recycling of the material
they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin”
symbol on the product remind you of your obligations that when you dispose of the appliance, it must be
separately collected.
Besides that, waste batteries and/or accumulator must be removed prior to delivery of WEEE, thought the
separated collection channels provided for this purpose (distributors and/or facilities from Local Authorities)

3
Chapter 1: Introduction
Chapter 2: General Operation
Chapter 3: Advanced Functions
Chapter 4: Other Information
14
14
4
4
4
4
4
4
4
5
6
8
10
10
11
12
12
12
13
Precautions .................................................................................................................................................
Product ........................................................................................................................................................
Power and Plug ...........................................................................................................................................
Power Cord and Signal Cable .....................................................................................................................
Use Environment .........................................................................................................................................
Cleaning ......................................................................................................................................................
Hanging the TV Set on the Wall ..................................................................................................................
Buttons on the TV .......................................................................................................................................
Sockets .......................................................................................................................................................
Remote Control Functions ..........................................................................................................................
Switching on ...............................................................................................................................................
Switching off ...............................................................................................................................................
Network connection ....................................................................................................................................
Menu Function ............................................................................................................................................
USB Function .............................................................................................................................................
Features of product ....................................................................................................................................
Attention and Frequently Asked Questions .................................................................................................
Troubleshooting ..........................................................................................................................................
Base Installation .........................................................................................................................................

4
Precautions
Product
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Do not block or cover the ventilation openings on the
back cover.
Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
carrying parts or short-circuit parts, resulting in fire,
electric shock, or damage to the unit.
Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by
yourself. Refer all servicing to qualified personnel.
Do not touch the screen surface with fingers as this
may scratch or mar the TV screen.
Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
Cleaning
Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
Do not apply excessive force to the screen when
cleaning.
Do not use water or other chemical cleaner to clean the
screen as this may damage the surface of the TV
screen.
Unplug the set under the following conditions:
- If the set will not be used for a long period of time.
- If the power cord or the power outlet/plug is damaged.
- Follow the instructions to install and adjust the
product. Adjust those controls that are covered in this
operating instructions as improper adjustment of other
controls may result in damage. If this happens, unplug
the set and refer to the service personnel.
- If the set is subject to impact or has been dropped to
have the cabinet damaged.
Power and Plug
Do not allow anything to rest on or roll over the power
cord and the signal cable.
Protect the power cord and the signal cable from being
trampled.
Do not overload the power cord or the power outlet.
Do not expose the power cord and the signal cable to
moisture.
Power Cord and Signal Cable
Do not place the set on an unstable cart, stand, or table.
Place the set on a place that allows good ventilation.
Do not use the set near damp, and cold areas. Protect
the set from overheating.
Keep the set away from direct sunlight.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
Do not use the set near dust place.
Use Environment
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following safety
notes:
Chapter 1
Note:
Illustrations within this publication are provided for
reference only.
All other safety instructions about our TV sets are also
applicable here.
Check that the wall can support the weight of the TV
set and wall mount assembly.
Follow the mounting instructions provided with the wall
mount.
The TV set must be installed on a vertical wall.
Make sure to use only screws suitable for the material
of the wall.
Make sure that the TV set cables are placed so that
there is not danger of tripping over them.

5
Buttons on the TV
Type 1:
Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the
remote and adjust menu controls. (Note: In some menus, VOLUME UP also acts like the OK button on the remote.)
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the
remote and adjust menu controls.
/ MENU button1.
Note: The location and names of the function buttons and power button on the TV may vary according to TV model.
And some buttons may not available for some models.
Turns the TV on or standby.The TV is on,press it, brings up the main menu or press to return to the previous menu.
Before enter menu, long press it for three seconds to display the Source Select. Long press it, TV will be off.
1. PROGRAM/CHANNEL UP/DOWN button
3. PROGRAM/CHANNEL UP/DOWN button
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the
remote and adjust menu controls.
2. VOLUME UP/DOWN button
2. VOLUME UP/DOWN button
Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote
and adjust menu controls. (Note: In some menus, VOLUME DOWN also acts like the OK button on the remote.)
5. POWER( ) button
Turns the TV on or standby. (Note: for some models, the button turns the TV on or off.)
3. MENU button
Brings up the main menu or press to return to the previous menu.
4. SOURCE button
Press to select signal source.
Type 2:
Type 3:
1. PROGRAM/CHANNEL UP/DOWN button
Scans up/down through the channel list. In the menu system, they act like the up/down direction buttons on the
remote and adjust menu controls.
2. VOLUME UP/DOWN button
Increases/decreases the volume. In the menu system, they act like the right/left direction buttons on the remote
and adjust menu controls. (Note: In some menus, VOLUME DOWN also acts like the OK button on the remote.)
5. POWER( ) button
Turns the TV on or standby. (Note: for some models, the button turns the TV on or off.)
3. HOME( ) button
Return to Home menu or enter certain source from Home menu.
4. OK button
In the menu system, confirms your selection or changes settings.
Note: In some models, when the power is on, press and hold the TV Controller more than 2 seconds and then release,
the NAV menu will display on the screen; When NAV menu is visible, you can highlight the shortcuts by moving
the Controller up/down direction, and press the Controller to enter, then operate according to the on-screen display.
The shorcuts are including Source, Menu, Home, Back and Standby.And the shortcuts may vary depending on
models.
To exit the NAV menu, press the Controller up/down direction till is highlighted, then press the controller again
to confirm.

6
ANTENNA/CABLE IN
ANTENNA/CABLE IN socket (input)
Lets you connect a coaxial cable to receive the signal from your antenna, cable,
or cable box.
HDMI socket (input)
CI socket
EARPHONE/HEADPHONE
VGA/PC AUDIO IN VGA/PC AUDIO IN socket
Provides audio connection when using VGA/PC.
VGA/PC
VGA/PC socket (input)
This socket can be used to connect a computer.
HDMI
The HDMI (High-Definition Multimedia Interface) socket can be used to connect a
PC with a compatible video card installed, certain DVD players or a high-definition
compatible digital satellite decoder.This socket provides an uncompressed digital
connection that carries both video and audio data by way of an integrated mini-plug
cable.
This CI socket can be used to put the CI card in to accept the locked programs.
- ARC (Audio Return Channel) function is only supported on certain HDMI (ARC) port
for some models.
- Number of HDMI ports may vary.
EARPHONE/HEADPHONE socket (output)
Allow you to connect earphones to listen to the sound coming from the TV.
Note: Excessive sound pressure from earphones can cause hearing loss.
CI
SCART SCART adapter
Connects to an external device, such as a VCR, set-top box, or a DVD player using
the included SCART adapter cable.
DIGITAL AUDIO OUTPUT
(COAXIAL)/SPDIF DIGITAL AUDIO OUTPUT(COAXIAL)/SPDIF
Use a digital cable to connect your TV to a compatible audio receiver.
SATELLITE SATELLITE socket (input)
This socket can be used to connect the satellite receiver pot.
Sockets
USB sockets (input)
USB
VIDEO
R
L
AV OUT
AUDIO
Note: Only HDMI sockets with the MHL identification will support the MHL function,
MHL stands for Mobile High-definition Link, and allows you to link an MHL-capable
mobile device to the television.
Note: The location and names of the sockets on the TV may vary according to
TV model, and some sockets may not available for some models.
These sockets can be used to connect an USB device.
Note: The number of USB sockets on the TV may vary according to TV model.
AV audio + video mini sockets (output)
These AV out socket can be used to connect a VCR to record programs. You must
leave the TV on the same channel you are recording. The VIDEO OUT socket
provides composite video connection.

7
AUDIO OUT mini sockets
AUDIO
L/R OUT
Use an audio cable to connect your TV to a compatible audio receiver.
AV audio + video mini sockets (input)
AV IN
VIDEO
R
L
AUDIO
LAN/RJ45 RJ45 plug for connecting to external modem or network access equipment.
LAN/RJ45
Y
Pb
Pr
YPbPr component sockets (input)
The component sockets can recognize if the device you're connecting to
is Y Pb Pr compatible. The component sockets provide excellent picture
quality because the video is separated into three separate parts.
Video
Component/
AV IN
L
R
Video + AV RCA audio sockets (input)
The AV IN sockets can be used to connect a range of equipment, including video
recorders, camcorders, decoders, satellite receivers, DVD players, or games
consoles.
Note: Component IN and AV IN share the same L/R Audio input jacks.
Audio
AC IN ~ AC In socket (input)
This socket can be used to connect a AC supply.
SD CARD The socket can be used to connect an SD card.
S-VIDEO S-VIDIO socket (input)
Allows you to connect an S-VIDEO cable from another component.
DC IN DC In socket (input)
This socket can be used to connect a DC supply.
SD CARD (input)
The AV IN sockets can be used to connect a range of equipment, including
video recorders, camcorders, decoders, satellite receivers, DVD players, or
games consoles. The VIDEO IN socket provides composite video connection.
OPTICAL OUT OPTICAL OUT socket
This output can be used to connect a compatible digital audio receiver.
LINE OUT sockets
LINE OUT
Use a 3.5mm stereo to RCA audio cable to connect your TV to a compatible
audio receiver.

8
Remote Control Functions
Most of your television's functions are available on the menu that appear on the screen. The remote control supplied
Note: The location and names of the buttons on the remote control may vary according to TV model, and not all
buttons available on all models.
Standby / quit standby.
TV To access TV mode.
SOURCE To select connected devices.
Alphanumeric
buttons
To enter channel numbers; to enter a letter, a digit or a symbol in some
functions.
LIST Displays the Channel List.
VOL +/- To control the volume.
To switch the sound off and back on.
To display programme information, if available.
CH+/- To change channels.
NETFLIX Goes to NETFLIX main page.
To access the Smart TV homepage.
To display the Settings menu.
▲/▼To navigate through the menus; to select menu options.
To navigate through the menus; to select menu options and change values.
OK
To return to the previous menu.
EXIT To exit the menu, homepage or Teletext, etc.
EPG Enter the EPG menu.
ZOOM To select the screen mode.
To display the Option menu.
SLEEP To select the sleep timer options.
PRE-CH To return to the previous channel in TV mode.
FAV To bring up your favourite channel list.
Enter the YouTube application.

9
Recording button. (Not available for some models.)
Colour
buttons
To select tasks or Teletext pages; to be used for HbbTV, Program Edit and
EPG function.
LANG To select a sound type available for selected analogue TV programme; to
select an audio language available for selected digital TV programme.
SUBTITLE To select a subtitle language available for selected digital TV programme.
TEXT To toggle Teletext on or off, and switch Teletext.
To select the previous picture, music or video.
To stop playback.
To start playback.
To select the next picture, music or video.
To start fast reverse.
To pause playback.
To start fast forward.

10
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote
control before going on to following pages describing how to use the channel set-up
procedure.
1. Insert two batteries in the remote control.
Precautions on using batteries:
- Only use the battery types specified.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
- Do not expose batteries to excessive heat such as sunshine, fire or the like,
throw them in a fire, recharge them or try to open them, as this could cause
them to leak or explode.
- Remove the batteries from the remote control if you are not using it for a long
period of time.
3. Connect an outside aerial to the ANTENNA IN socket at the back of the TV set.
4. When powered on, the TV will be turned on directly or be in standby.
Note: For some models, switch the TV on by pressing the power button.
If the power indicator lights up, the TV set is in standby mode. Press the
button on the remote control or on the TV set to turn on the TV.
2. Connect the power cable FIRST to the television, THEN to a mains socket.
(Note: If the power cable is connected to the television, please only connect the
power cable to the mains socket.)
If your TV is connected to an AC supply
Your TV set should only be connected to an AC supply. It must not be connected
to a DC supply. If the plug is detached from the cable, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.
If your TV is connected to a DC supply
Your TV set should only be connected to a DC supply. It must not be connected
to a AC supply. If the plug is detached from the cable, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.
Switching off
To put the TV set into standby mode, press the button on the remote control
or on the TV, the TV set remains powered up, but with low energy consumption.
To switch off the TV set, unplug the mains socket from the mains outlet.
Note: For some models, press the power button to switch off the TV set .
Chapter 2

11
Network Connection
To access the internet, you must subscribe high speed broadband internet service from your internet service provider.
Your TV can be connected to your home network in two ways:
Wired, using the RJ45 (LAN) connector on the back panel.
Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.
ModemInternet
TV Set
Router
Ethernet
Port on the
back panel
or
Wireless
USB Adapter
Wireless Router
Modem
USB
port on the
back panel
TV Set
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
An ethernet cable long enough to reach your TV
A router or modem with an available Ethernet port
A high-speed internet connection
An Ethernet (LAN) port on the back of the TV
2. Connect your ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network Settings to configure the TV.
Connecting to a wireless network
To connect to a wireless network
1. Ensure you have:
A router broadcasting a high-speed wireless signal
A high-speed internet connection
A wireless USB Adapter (not need for a built-in
wireless connection).
2. The TV set with Wi-Fi Module.
Note: Some models may have internal wireless module,
then the wireless USB adapter is unnecessary. Some
external wireless adapters cannot be campatible with
the TV.
3. Use the Network menu to configure the TV.
Note: This function is not available for certain models. Instructions below are just the usual ways to connect your TV
to the wired or wireless network. The connection method may be different depending on your actual network
configuration. If you have any questions about your home network, please refer to your ISP (Internet Service Provider).

12
CHANNEL
The CHANNEL menu allows you to select all the
settings required to be able to search for and store
all the channels you can receive. You also may edit
those channels.
PICTURE
Menu Function
Note: This function is only available in TV mode.
The menus for adjusting the picture are used to obtain the
best picture setting according to your preference, the type
of programme you are watching and the ambient lighting.
SOUND
TIME/TIMER
LOCK
The TIME/TIMER menu allows you to set the sleep time,
turn on time, turn off time, etc..
The SOUND menu allows you to adjust each option for
your listening pleasure.
SETUP/SETTING/OPTION
SCREEN/PC
The LOCK menu allows you to effectively stop the desired
one without the correct password from watching TV.
The SETUP/SETTING/OPTION menu allows you to set
the OSD language, Audio language, etc..
The SCREEN/PC menu allows you to adjust the picture's
position, phase clock, etc..
Note: Only available in VGA/PC mode.
Connect a USB device to a USB socket and display
the main menu.
You can play movie, photo, music or text on TV.
USB Function
Note: Some options may unavailable in some models.
In USB state, if no USB device connected, the USB
interface will be displayed.
Note: The names of the functions on the TV may vary
according to TV model, and not all functions are available
on all models.
Features of product
High definition picture
Ultra slim
USB support movie
Energy saving
High contrast ratio
High resolution
User-Friendly function & interface
Eye protection
The following instructions will introduce the main menu
of the TV simply. These functions are the basic functions
for TV, please note that some functions might be
unavailable in certain input source. And for some models,
certain options are not available.

13
Attention and Frequently
Asked Questions
Attention:
Some non-standard mobile storage device may
not be recognized. Please change to use the
standard device.
Note: For coding files, there are many kinds non-
standard coding method, so this system can not be
guaranteed to support the file formats using any coding
method.
Frequently Asked Questions:
1. Under the following conditions, this system cannot
decode the file and the file cannot be play normally:
-The parameters of file, such as the pixel of picture,
code rate of audio and video file, sampling rate of
audio file, exceed the limit of the system;
-The format of file is not matched or the file is harmed.
2. Hot plug: Do not disconnection when the system is
reading or transmitting data, avoid damaging the system
or the device.
3. Pay attention to the power supply of the device when
you are using a mobile hard disk or a digital camera.
If the power supply is not sufficient or not stable, you
may encounter problems during operating or can not
operate at all. In this case, please restart the device,
or unplug the device and plug it again, and ensure that
its power supply is normal.
4. The system supports standard USB1.1 and USB2.0
devices, such as standard U-disks, MP3 players,
mobile hard disks, etc..
5. For obtaining better audio and video quality, suggests
to use the external device which accords with USB2.0
standard.
6. When playing the video with high compression ratio,
these phenomenons, such as picture standstill and
menu long time response, are normal.
7. For some USB device with power supply, such as large
size hard disk, MP4, etc., suggests using it with power
to avoid electric power shortage.
Chapter 3

14
Troubleshooting
Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No color
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the Vol+ button to increase volume.
2. Volume is set to mute, press the mute button to
restore sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Blank screen in VGA mode
Perhaps the TV can not recognize the resolution set by
the PC. Suggest to change to the best resolution or other
standard resolutions of the Windows system.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak,
it may be necessary to install a special antenna to
improve the reception.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
Chapter 4
Ignition
Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following two
paths. One is the direct path, the other is reflected from
tall buildings, hills, or other objects. Changing the direction
or position of the antenna may improve the reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
If the TV is crashed
1. Press the Power button to turn off TV, then press the
Power button again to reset TV.
2. Unplug the power cord, then press the Power button
to reset TV.
Note: If these 2 methods can not be resolved, please
contact the after-sales to solve.
Base Installation
To fix the double support base on the unit by screws,
the installation is completed.
2
1
Screw x 4
Base x 2
Note: Illustrations below are provided for reference only
and may differ from actual product appearance.

UHD SMART TV
GR50E8400
GR55E8400
LIBRETTO DI
ISTRUZIONI
Si prega di leggere attentamente e di conservare per riferimento futuro.

Il simbolo del fulmine all’interno di un triangolo significa “cautela con l’elettricità!” Indica la presenza di
informazioni sulla tensione di funzionamento e i potenziali rischi di shock elettrico.
ATTENZIONE
1. Per ridurre il rischio di incendi e di shock elettrici non rimuovere le viti. Nessuna delle parti all’interno può
essere sostituita dall’utente. Rivolgersi esclusivamente a personale qualificato.
2. Il punto esclamativo all’interno di un triangolo significa “Attenzione”. Si leggano attentamente tutte le
informazioni riportate in prossimità di questo simbolo.
3. Lasciare liberi i fori di ventilazione dell’unità. Non coprire i fori di ventilazione con giornali, tovaglie, e non
coprire con oggetti quali ad esempio tende.
4. Accertarsi che il voltaggio presente nella piastra di identificazione corrisponda al voltaggio della rete
elettrica locale.
5. Si raccomanda di scollegare il dispositivo dalla rete principale e il cavo dell’antenna in caso di temporali
per evitare il rischio di cortocircuiti o fluttuazioni elettromagnetiche. Pertanto è necessario posizionare le
prese e l'antenna in modo da essere facilmente scollegabili quando necessario.
6. L’apparecchiatura non dovrebbe essere esposta a sgocciolamenti o a spruzzi d’acqua e nessun
contenitore pieno di liquido (vasi, bottiglie, bicchieri) deve essere collocato sul dispositivo. Per ridurre il
rischio di incendio o di shock elettrico non esponete l’apparecchiatura a pioggia o a umidità.
7. Non esporre le batterie a temperature elevate, non gettare nel fuoco, caricare o lasciare all’aperto. In
caso contrario potrebbero verificarsi delle esplosioni.
8. Verificare che la superficie sulla quale si intende posizionare il dispositivo sia solida e grande quanto
basta per sopportarne il peso. Non posizionare il set TV su una superficie instabile e verificare che il lato
anteriore del set TV non penda verso il basso sulla superficie dov’è posizionato.
9. Non mettere materiali infiammabili, quali ad esempio candele accese, sull’apparecchiatura.
10. Al fine di garantire una corretta ventilazione, lasciare uno spazio libero di almeno 5 cm intorno al
prodotto, successivamente al suo posizionamento.
IMPORTANTI ISTRUZIONI SULLA SICUREZZA
ATTENZIONE
RISCHIO DI SCOSSA ELETTRICA
NON APRIRE
AVVERTENZA: NON APRIRE IL COPERCHIO (O IL PANNELLO POSTERIORE) PER
EVITARE PERICOLI LEGATI A SCOSSE ELETTRICHE.
IL DISPOSITIVO NON INCLUDE PARTI CHE POSSONO ESSERE RIPARATE DALL’UTENTE.
PER LE OPERAZIONI DI MANUTENZIONE CONSULTARE IL PERSONALE AUTORIZZATO.

Disposizioni sull’utilizzo delle batterie
Le batterie utilizzate con questo prodotto contengono sostanze chimiche che risultano essere dannose per
la salute e per l’ambiente. Per preservare l’ambiente smaltire adeguatamente le batterie seguendo le leggi
e i regolamenti previsti dal tuo Paese. Per informazioni più dettagliate sul riciclaggio dei prodotti, contattare
gli uffici comunali, i servizi per lo smaltimento dei rifiuti domestici oppure il rivenditore presso il quale è stato
acquistato il prodotto.
Questo apparecchio è un apparecchio elettrico di Classe II o a doppio isolamento. È stato
progettato in modo tale da non richiedere un collegamento di sicurezza a messa a terra.
Per evitare il rischio di incendi, tenere questo prodotto lontano da candele o altre fiamme libere.
Questo dispositivo è realizzato con componenti riciclabili in conformità con la direttiva WEEE.
Questo simbolo sul prodotto o sulla confezione indica che il prodotto non va gestito come
un normale rifiuto domestico. Dovrebbe invece essere consegnato presso i punti di raccolta
adeguati per il riciclaggio delle apparecchiature elettriche ed elettroniche. Smaltendo il prodotto
in modo adeguato contribuirete ad evitare potenziali effetti negativi che potrebbero insorgere.
Il riciclaggio dei materiali contribuisce alla protezione delle risorse naturali.
Per informazioni più dettagliate sul riciclaggio dei prodotti, contattare gli uffici comunali, i servizi
per lo smaltimento dei rifiuti domestici oppure il rivenditore presso il quale è stato acquistato il
prodotto.

3
Indice
Capitolo 1: Introduzione
Avvertenze di sicurezza..........................................................................................................................................4
Prodotto...................................................................................................................................................................4
Alimentazione.........................................................................................................................................................4
Cavo di alimentazione e antenna .......................................................................................................................4
Ambiente di utilizzo.................................................................................................................................................4
Pulizia .......................................................................................................................................................................4
Montaggio a parete..............................................................................................................................................4
Pulsanti ....................................................................................................................................................................5
Prese ........................................................................................................................................................................6
Telecomando.........................................................................................................................................................8
Capitolo 2: Generale
Accensione...........................................................................................................................................................10
Spegnimento........................................................................................................................................................10
Connessione rete.................................................................................................................................................11
Funzione Menu.....................................................................................................................................................12
Funzioni USB ..........................................................................................................................................................12
Caratteristiche del prodotto................................................................................................................................12
Capitolo 3: Funzioni Avanzate
FAQ........................................................................................................................................................................13
Capitolo 4: Altre Informazioni
Individuazione e risoluzione dei problemi..........................................................................................................14
Montaggio............................................................................................................................................................15

4
Avvertenze di sicurezza
La invitiamo a leggere il manuale con attenzione
prima di continuare.
Conservare per riferimenti futuri.
Prodotto
• Non ostruire le aperture di ventilazione
• Non inserite oggetti metallici all’interno del
televisore, pericolo di elettroshock
• Non rimuovere il coperchio o il pannello
posteriore. L’apparecchio non contiene pezzi
riparabili dall’utente. Per qualsiasi riparazione
rivolgersi ad un tecnico qualificato
• Evitare di toccare lo schermo o di appoggiarvi
le dita per lungo tempo. Potrebbero verificarsi
distorsioni temporanee sullo schermo o graffi
Alimentazione
• Scollegare la presa quando:
-Non si utilizza l’apparecchio per lunghi periodi
di tempo
-Il cavo di alimentazione o la presa sono logori
o danneggiati
-Si presenta un temporale
-Entra in contatto con liquidi
Cavo di alimentazione e antenna
• Non porre oggetti pesanti sul cavo di
alimentazione o sull’antenna
• Proteggere il cavo di alimentazione e il cavo di
segnale da eventuali calpestii
• Non sovraccaricare il cavo di alimentazione o la
presa di corrente
• Non esporre il cavo di alimentazione e l’antenna
all'umidità
Ambiente di utilizzo
• Non posizionare il set TV su una superficie
instabile
• Assicuratevi che vi sia un’ adeguata ventilazione
• Non utilizzare il set vicino a zone umide e fredde.
Proteggere da surriscaldamento
• Tenere il set lontano dalla luce diretta del sole
• L'apparecchio non deve essere esposto a
sgocciolamenti o spruzzi e nessun oggetto
riempito di liquidi, come i vasi, deve essere
collocato sull'apparecchio
• Non utilizzare il set vicino alla polvere
Pulizia
• Spolverare il set pulendo lo schermo e l'armadietto
con un panno morbido e pulito o con uno
speciale detergente liquido
• Non applicare una forza eccessiva allo schermo
durante la pulizia
• Non usare acqua o altri detergenti chimici
per pulire lo schermo, poiché ciò potrebbe
danneggiare la superficie dello schermo del
televisore
Montaggio a parete
Attenzione: questa operazione richiede due
persone
Per garantire un'installazione sicura, osservare le
seguenti avvertenze di sicurezza:
• Verificare che la parete sia in grado di sostenere
il peso del televisore e del montaggio a parete
• Seguire le istruzioni di montaggio fornite con il
supporto a parete.
• Il televisore deve essere installato su una parete
verticale
• Assicurarsi di utilizzare solo viti adatte alla
superficie sulla quale si intende montare
l’apparecchio
• Assicurarsi che i cavi del televisore siano
posizionati in modo che non vi sia pericolo di
inciampare
Tutte le altre istruzioni di sicurezza sui nostri televisori
sono applicabili anche qui
Nota: Tutte le illustrazioni all'interno di
questo manuale sono fornite solo a titolo di
riferimento
Capitolo 1 Introduzione