Granberg Basicline 406 User manual

2022-12-14
Operating / Care instructions Basicline 406
1. Operating instructions
Basicline 406 is a bracket with gas spring for height adjustment of the washbasin. The built-in gas spring helps to
adjust the height of the washbasin to the desired position. No tools required for adjustment. Basicline 406 is
mounted below the mirror and mirror cabinet.
Height adjustment:
1. Pull out the locking pin and turn it 1/4. (Pos. 1)
2. Adjust the height.
3. Turn the locking pin 1/4 and release it to lock the height.
2. Maintenance
The product is maintenance-free. Greasing and other actions are made during the manufacturing for the lifetime of
the lift. From safety point of view however some components shall be inspected each year.
Inspections, service and repair work shall be made by competent persons.
Remove any objects from the washbasin before maintenance and repair works are made.
3. Functional test
Check that the locking pin is properly fixed to the bracket.
Check that no cables or hoses are jammed and that the water and sewer hoses are properly fixed to the
wall.
Make sure the wall installation and washbasin installation are intact.
Granberg Interior AB - Importgatan 30 - 602 28 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se

4. Cleaning
Clean with lukewarm water and a non-scratching detergent containing soap or similar. Use a soft cloth or similar.
After cleaning the surfaces shall be dried to avoid lime deposits.
Scratching detergents or tools e.g. steel wool may not be used.
5. Service & maintenance records
Order Serial Date
Date
Sign
Remarks
Date
Sign
Remarks
Date
Sign
Remarks
Date
Sign
Remarks
Powered by TCPDF (www.tcpdf.org)
Granberg Interior AB - Importgatan 30 - 602 28 Norrköping - SWEDEN
Tel: [phone] - E-mail: [email protected] - Internet: www.granberg.se