GRAND RESORT Delian 7pc Klismos Dining User manual

1
Owner’s Manual
Delian 7pc Klismos Dining
Product Code: D71 M1541
KSN: 04827688-5
UPC Code: 095457131193
Date of Purchase: _____/ _____/ _____
G R A N D R E S O R T

1. Lay top assembly A upside down on a non-abrasive
surface. Attach two legs C to top assembly A using
eight 1/4x16mm bolts D and eight washers E. Attach
the leg support B to two legs C using two 1/4x16mm
bolts D and two washers E. (See Fig. 1, 1A and 1B).
2. Repeat process for the remaining legs C. (See Fig. 2,
2A and 2B).
Tighten all bolts securely.
Top Assembly 1
1
24
24
1
Leg
Leg Support
4
Fig. 1B
BEFORE YOU START:
Check package for completeness using the parts list. Carefully remove all
packing material and place items on a clean, non-abrasive surface.
For best results, use a power drill to tighten all bolts. Do not over-tighten.
Alum. Cast Top Table
Assembly Instructions
Item# A48A34 Description QTY
C
D
E
Part List
Item No.
A
B
Allen Wrench
Washer
F
G
2
Fig. 1
Fig. 2
Fig. 3
TIGHTEN BOLTS COMPLETELY AND VERIFY
THAT ALL PARTS ARE SECURELY FASTENED
BEFORE USE.
CAUTION!
Injury may result if the bolts are not securely
fastened. Tighten the bolts frequently.
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
Made in China
1
B
C
BC
Fig. 2B
B
C
A
A
CC
B
C
Umbrella Hole Cap
F
3. Turn table over to upright position.
You may insert umbrella hole cap F on center of
table top while not using umbrella. (See Fig. 3).
Your table is now ready to use.
D
E
D
E
1/4”x16mm
Fig. 1A
D
E
D
E
D
E
D
E
Fig. 2A

Part Description
ATOP ASSEMBLY
BLEG SUPPORT
C
E
D BOLT
F
WASHER
G
LEG
ALLEN WRENCH
HFOOT CAP
REPLACEMENT PARTS LIST
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
3
A
B
C
D
G
E
F
H
UMBRELLA HOLE CAP

4
Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 1-800-585-9969 Monday-Friday 9AM-5PM (Pacific Time)
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com

1
Owner’s Manual
Delian 7pc Klismos Dining
Product Code: D71 M1541
KSN: 04827688-5
UPC Code: 095457131193
Date of Purchase: _____/ _____/ _____
G R A N D R E S O R T

C
B
A
G
H
Alum. Single Sofa Chair
Assembly Instructions
Item# A13A56
The provided parts are for 4 chairs.
Fig. 1
Fig. 2
2
BEFORE YOU START:
Check package for completeness using the parts list. Carefully remove all
packing material and place items on a clean, non-abrasive surface.
For best results, use a power drill to tighten all bolts. Do not over-tighten.
Note:
Required two persons minimum to operate or assemble.
For customer service, please call toll free
1-800-585-9969, 9:00 am - 5:00 pm
(Pacific Time), Monday through Friday.
Made in China
3. Attach the back and seat cushions H by
snapping the straps around the chair back
and chair seat. (See Fig. 2).
Your chair is now ready to use.
TIGHTEN BOLTS COMPLETELY AND
VERIFY THAT ALL PARTS ARE SECURELY
FASTENED BEFORE USE.
CAUTION!
Injury may result if the bolts are not securely
fastened. Tighten the bolts frequently.
E
F
E
F
C
B
Fig. 1A Fig. 1B
Description QTY
C
D
E
Part List
Item No.
A
B
Washer
Long Bolt
Chair Back
16
16
32
F
Chair Seat
Short Bolt
G
H
I
Chair Leg 8
Seat Cushion
Back Cushion
Allen Wrench 1
4
4
4
4
1. Attach chair leg C to the chair seat B using
two long bolts E and two washers F.
(See Fig. 1A).
Repeat for another leg.
2. Insert chair seat B (left and right) to the
chair back A (left and right) together using
four short bolts D and four washers F.
(See Fig. 1B).
B
D
F
FD
A

Part Description
ACHAIR BACK
BCHAIR SEAT
D
C
LONG BOLT
E
WASHERF
ALLEN WRENCH
GBACK CUSHION
H
J
I
SEAT CUSHION
BACK FOOT CAP
SHORT BOLT
REPLACEMENT PARTS LIST
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
3
A
H
B
K
G
J
I
M
L
F
D
C
CHAIR LEG
E
K
L
M
FRONT FOOT CAP
L CONNECTOR
U CONNECTOR

1. Attach chair seat C to the chair back B using two 16mm
b olts G. (See Fig 1A)., two washers I
BEFORE YOU START:
Check package for completeness using the parts list.
Carefully remove all packing material and place items
on a clean, non-abrasive surface.
For best results, use a power drill to tighten all bolts.
Do not over-tighten.
Spring Cushion Chair
Assembly Instructions
Item# A13A57
4
TIGHTEN BOLTS COMPLETELY AND VERIFY
THAT ALL PARTS ARE SECURELY FASTENED
BEFORE USE.
CAUTION!
Injury may result if the bolts are not securely
fastened. Tighten the bolts frequently.
Your chair is now ready to use.
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
Made in China
The provided parts are for 2 chairs.
Fig. 3Fig. 1
Fig. 2
Fig. 1B
G
I
G
I
Fig. 1A
Fig. 1C
Attach chair seat C to the chair using four 16mm arm A
b olts G. (See Fig 1B)., four washers I
Attach chair arm to the chair back B using two 19mm A
b olts H(See Fig 1C)., two washers I.
L
M
J
K
3. cushion E by tying the straps
around the chair back and place the pillow F on
the chair. (See Fig. 3).
Attach the chair
Spring Washer
8
8
8
8
16
4
12
2
1
Big Washer
Small Washer
Nut
Hexagonal Bolt
19mm Bolt
16mm Bolt
Description QTY
K
J
I
L
Part List
Item
No.
Allen Driver
Wrench
M
O
N
2
2
2
2
2
4
Description QTY
C
D
E
Item
No.
A
B
F
H
G
G
I
H
I
A-R
A-L
C
B
D
3. Attach chair base D to the seat C using four hexagonal
bolts J, four big washers K, four spring washers L and
four nuts M. Be sure to place big washers K towards the
seat C, and spring washers L towards the chair base D.
(See Fig. 2). *Do not tighten any bolt completely until all
bolts are inserted. Tighten all bolts securely.
E
F
Cushion
Arm
Base
Back
Pillow
Seat

Part Description
A-R CHAIR RIGHT ARM
A-L CHAIR LEFT ARM
CHAIR BACKB
CHAIR SEAT
D
C
ESEAT CUSHION
F
G
PILLOW
16MM BOLT
CHAIR BASE
REPLACEMENT PARTS LIST
For customer service, please call toll free 1-800-585-9969,
9:00 am - 5:00 pm (Pacific Time), Monday through Friday.
5
B
A-R
A-L
N
E
F
H
J
M
L
KG
I
O
D
P
C
Q
Part Description
SMALL WASHERI
HEXAGONAL BOLT
BIG WASHER
J
SPRING WASHER
L
K
M
WRENCH
N
OALLEN DRIVER
NUT
H19MM BOLT
P
Q
SPRING PLATE
TUBE STOPPER

6
Please refer to part numbers when reordering
For questions or comments about product:
Call toll-free: 1-800-585-9969 Monday-Friday 9AM-5PM (Pacific Time)
Made in / Hecho en CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com