Grape Solar STONE User manual

A. Mobile power pack
B. Product Specicaons:
Baery Type Polymer Lithium-ion baery
Nominal Input DC 5V/1000mA
Nominal Output DC 5V/1000mA
Capacity [email protected](19.2Wh)
Dimensions 99x72x18mm
Weight 142g
Color Oponal
Operang Temperature 14°F to 110F° (-10°C to 45°C)
STONE
Thank you for purchasing the Stone portable power pack.
It is a rechargeable device designed to store energy from a
portable solar panel or USB charging port and use that
power to charge mobile devices including, but not limited
to, smart phones, tablet PCs and MP3 players. Please read
the manual carefully before using this product and be sure
to keep this manual in a safe place for future reference.
Do not expose the power pack to prolonged high temper-
atures over 110°F (45°C).
Do not short circuit the power pack
Do not store or transport the device near sharp objects
that may puncture the power pack.
Keep power pack away from water. If the power pack
becomes wet unplug the cables immediately.
Do not use the power pack if there is an electrolyte
leakage, strange odor, overheang, color change or any
other abnormal occurrences.
Power pack User Manual
Use Guidelines
Safety Precauons
Product Introducon
Operaon Guide
1.
1-1
1-2
1-3
Charging the mobile power pack
Charging via the USB Cable: Plug the USB cable into a USB
adaptor that can plug into a wall outlet or computer. Plug the
USB end of the charging adaptor cable into the adapter and the
micro-USB end of cable into the power pack input port.
Charging via Solar: Plug the USB cable into the power pack input
port, then plug the USB cable into the Grape Solar portable
panel’s USB port.
When the mobile power pack is being charged the capacity
indicaon lights will ash. When it is fully charged, the lights will
stop ashing.
Please read this manual carefully before using the
product.
Be sure to select the proper connector for your device.
Do not aempt to charge a device with your power pack
at the same me your power pack is charging.
When the power pack is not in use disconnect all cables.
Only use an adapter that matches the input specicaons
of the mobile power pack. Using the wrong adaptors
may damage the device.

Charging your mobile devices
Check the remaining capacity of the mobile power pack. If
the capacity is low, charge it rst.
Select the correct connector from the USB output of the
mobile power pack to your mobile device.
Plug the connector into your mobile device and then plug
the cable into the USB output port of the mobile power
pack.
The power pack will be turned on automacally and start
charging the mobile device.
2.
2-1
2-2
2-3
2-4
3.
4.
Storage and Maintenance
If you do not plan to use the mobile pack for an extended
period of me, please take the following steps:
1) Charge the power pack to between 25% and 75%.
2) Store the product and accessories in a cool dry place.
3) Use the power pack at least once every three months.
Troubleshoong
If you are experiencing dicules with your mobile power
pack, please refer the following table:
Focus on Reliability & Innovaon
Smart charging and 12 mul-protecons make Grape Solar
mobile power packs among the safest on the market.
One year limited warranty for workmanship and materials
Mobile Power Pack
Automac shut down
The mobile power pack will turn o automacally when it
no longer detects a device to charge.
Checking the remaining capacity
Press the acvaon buon and the capacity indicaon
lights will show the level of charge.
Note: If you already have a USB cable to charge your mobile
device from a computer USB port, you can also charge your
device from the mobile power pack with the same cable.
REV. 140423