GRASS VALLEY ADVC3000 - User manual

User Manual
3000

Notices & Warranties
2
Copyright Regulations
It is illegal for anyone to violate any of the rights provided by the copyright laws to the owner of copyright,
except for fair use (mainly private noncommercial use). Also, in certain cases copying is prohibited with
no exceptions. In no event shall Canopus be liable for any direct or indirect damages whatsoever arising
from the use of captured materials.
Warranty
Your ADVC3000 options are covered by a limited warranty when you register your Canopus product. This
warranty is for a period of three years from the date of purchase from Canopus or an authorized Canopus
agent. This warranty applies only to the original purchaser of the Canopus product and is not transferable.
Canopus Co., Ltd. warrants that for this period the product will be in good working order. Should our
product fail to be in good working order, Canopus will, at its option, repair or replace it at no additional
charge, provided that the product has not been subjected to misuse, abuse or non-Canopus authorized
alternations, modifications and/or repair. Proof of purchase is required to validate your warranty.
Canopus is not responsible for any lost profits, lost savings or other incidental or consequential damages
arising out of the use of, or inability to use, this product. This includes damage to property and, to the
extent permitted by law, damages for personal injury. This warranty is in lieu of all other warranties of
merchantability and fitness for a particular purpose.
Cautions
Please observe the following cautions when using this product. If you have any questions regarding the
method of usage, the descriptions herein, or any other concerns, please contact Canopus Technical
Support.
4

Notices & Warranties
3
DANGER
The following conditions indicate the potential for serious bodily injury or loss of life.
Health precautions
In rare cases, flashing lights or stimulation from the bright light of a computer display or TV monitor may
trigger temporary epileptic seizures or loss of consciousness. It is believed that even individuals who have
never experienced such symptoms may be susceptible. If you or close relatives have experienced any of
these symptoms, consult a doctor before using this product.
Do not use in environments requiring a high degree of reliability and safety
This product is not to be used in medical devices or life support systems. The characteristics of this
product is not suited for use with such systems.
Protect against static electricity
An electrostatic discharge may damage components of this product. Do not directly touch any of the
connectors.
Static electricity can be generated on clothing and on people. Before handling the product, discharge
static electricity from your body by touching a grounded metal surface.
Do not disassemble
Do not remove the cover or modify the Product. Fire, electric shock or malfunction may result. For internal
inspection or repair, please contact your system integrator or Canopus directly.
Do not operate at other than the specified voltage
Do not operate at other than the specified voltages of AC 100-240V. Operation at other than the rated
voltage may result in fire or malfunction.
Do not operate with other than the specified power supply
Do not operate with other than the specified power cord, or with a car power supply. Such operation may
result in fire or malfunction.
Handle the power cord carefully
Do not place heavy objects on top of the cord, or place it near hot objects. Doing so may damage the cord
and result in fire, electrical shock, or malfunction. Altering the cord, or excessively bending or pulling the
cord may result in fire or electrical shock. If the cord is damaged, please contact your local retail outlet or
Canopus directly.
5

Notices & Warranties
4
CAUTION
The following conditions indicate the potential for bodily harm, damage to hardware or loss of data.
Do not pull the power cord when disconnecting from electrical outlet
When disconnecting the power cord, pull on the plug, not the cord itself. Pulling on the cord can damage
the cord and may result in fire or electric shock.
Do not touch the power cord with wet hands
Do not disconnect or plug in the power cord when your hands are wet. Contact with water may result in
electric shock, fire or damage.
Do not setup in areas subject to heat
Do not setup in an area exposed to direct sunlight or near a heating apparatus. The heat can accumulate,
causing burns, fire or damage. Also, the unit may become deformed or change color.
Only setup using the prescribed method
Do not setup in a manner other than prescribed. Do not use while wrapped in cloth or plastic. Heat can
accumulate, causing burns, fire or damage.
If product will not be used for an extended period
If this product will not be used for an extended period of time, disconnect the power cord from the electrical
outlet.
Do not block the ventilation holes
Do not use the ADVC3000 covered with a cloth or in an ill-ventilated room.
Covering the vent may cause heat inside of the product resulting in fire or product malfunction.
Confirm the enough space around the ventilation holes when mounting this unit on a rack.
Precautions for use of the power cord
The supplied power cord are for exclusive use of this product. Do not operate the product with other power
cord or in other combinations.
6

Notices & Warranties
5
FCC Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
CE Notice
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
Declaration of Conformity
According to FCC Part 15
Responsible Party Name: Canopus Corporation
Address: 711 Charcot Avenue San Jose, CA 95131
Telephone: [phone]
Declares that product Model: ADVC3000
Complies with Part 15 of the FCC Rules.
7

Notices & Warranties
6
Product Notes
1. Unauthorized copying of a portion or the entirety of this product is prohibited.
2. The description and specifications of this product are subject to future change without notice.
3. The description of this product has been prepared to be as complete as possible.
If the reader is aware of any questionable points, errors, or omissions, please contact Canopus.
4. The company assumes no liability for the results of practical application, regardless of item (3)
above.
5. Regardless of whether negligence occurs during usage, the company assumes no liability, even if
there is a claim for extraordinary, incidental or derivative loss, including the loss of profits, that arises
during practical application of this product.
6. The analysis, reverse engineering, recompiling and disassembling of the software, hardware or manuals
that accompany this product, and all other related products including miscellaneous supplemental
items, are prohibited.
7. Canopus, as written in both English and Japanese, and its logo are registered trademarks of Canopus
Co., Ltd.
8. ADVC is registered trademark of Canopus Co., Ltd.
9. Microsoft and Windows are registered trademarks of Microsoft Corporation in the US and other
countries.
10. Macintosh is registered trademark of Apple Computer, Inc.
11. Other product names and related items are trademarks or registered trademarks of their respective
companies.
About the Documentation
This document is the ADVC3000 User Manual.
Information not listed in this document may be listed elsewhere.
In cases where there is a difference between a description in this document and an actual operation
method, the actual operation method takes precedence.
8

7
3000
Table of Contents
9

Table of Contents
8
Table of Contents
Copyright Regulations .............................................................................................................2
Warranty..................................................................................................................................2
Cautions ..................................................................................................................................2
DANGER .................................................................................................................................3
CAUTION ................................................................................................................................4
FCC Notice..............................................................................................................................5
CE Notice ................................................................................................................................5
Declaration of Conformity........................................................................................................5
Product Notes..........................................................................................................................6
About the Documentation........................................................................................................6
Chapter 1 - Introduction
1 Introduction......................................................................................................10
1-1. Package contents ............................................................................................................ 10
1-2. Customer Support ...........................................................................................................11
1-3. Canopus web-site............................................................................................................11
1-4. Online user registration ...................................................................................................11
1-5. Limitations .......................................................................................................................11
2 Features of ADVC3000 ....................................................................................11
Chapter 2 - Basic Operations
1 Part names and functions...............................................................................14
1-1. ADVC3000 front panel.....................................................................................................14
1-2. ADVC3000 rear panel .....................................................................................................16
1-3. DIP switch settings ..........................................................................................................18
1-4. LCD screen displays .......................................................................................................19
2 Connecting devices.........................................................................................26
2-1. Connecting ADVC3000 unit.............................................................................................26
2-2. Importing VCR data to your PC.......................................................................................28
2-3. Recording PC-edited data onto a tape with VCR ............................................................29
3 Menu setting operations .................................................................................30
3-1. Menu screen operations..................................................................................................30
3-2. Presetting the video/audio input......................................................................................33
3-3. Setting parameters ..........................................................................................................36
Chapter 3 - Appendix
1 Specifications ..................................................................................................64
10

9
Chapter 1
Introduction
This chapter introduces topics you should know
prior to setting up the ADVC3000. Before you
using the ADVC3000, read this chapter to ensure
a trouble-free setup.
- Introduction
- Features of ADVC3000
3000
11

Chapter 1 - Introduction
10
1Introduction
1-1. Package contents
Please verify that the following items are included in the ADVC3000 package. If any of the components
are missing, please contact Canopus Customer Support.
• 1 x ADVC3000 unit
• 1 x Power cord
• 1 x Power cord clamp
(to prevent the power cord from accidentally pulling out)
• 1 x DV cable [6 pin - 4 pin]
• 2 x Rack-mount brackets
• 4 x Attachment screws
• 1 x ADVC3000 User Manual (this document)
When mounting the ADVC3000 on a rack:
1. Use a Phillips-head screwdriver to remove the four rubber feet from the bottom of
the unit.
2. Attach the rack-mount bracket to the ADVC3000 unit with the screws provided.
12
ψ
ψ
1. Insert.
2. Adjust the position.
3. Snap
close.

Chapter 1 - Introduction
11
1-2. Customer Support
For questions regarding hardware setup and usage, please contact your local Canopus office,
distributor, or the store where you have purchased this product.
1-3. Canopus web-site
Including ADVC3000, the latest company information is announced at our website
http://www.canopus.com/. The latest drivers, utilities, product manuals, FAQs, etc. are also available
at our website.
1-4. Online user registration
You can register your ADVC3000 at the Canopus website.
http://www.canopus.com/support/supportcenter.php
1-5. Limitations
• Limitations on the nonstandard signal
While the ADVC3000 can convert the signals output by game consoles, there is a possibility that
some software will be unable to synchronize some video and audio signals.
* In order to capture the nonstandard signal, such as one from a game console without audio noise, enable the “108
DVout frame sync”. In this instance, frame-skip or frame-hold will occur.
• Limitations on the ADVC3000 connection
Before you connect(or disconnect) your ADVC3000 to(or from) a PC, ensure that the PC has been
powered off.
• Limitations on connecting your ADVC3000 to Windows 2000 PC through IEEE1394
interface (OHCI)
When the ADVC3000 is operating in NTSC mode, the DV frame rate being output from the OHCI
driver is markedly slower than the standard frame rate. Therefore, glitches in both the frame hold
and time-code can occur regularly while the DV output signal is being converted to an analog
signal. This phenomenon does not occur, however, when the signal is input through OHCI from the
ADVC3000.
13
2Features of ADVC3000
vHigh-specification video converter for professional use
The ADVC3000 is a converter designed to be used with professional VCR to convert Analog
Component/SD-SDI to DV and vice versa. This unit enables the conversion of the data from
Betacam, Digital Betacam, etc., to DV for use with nonlinear editing systems. Uncompressed 4:2:2
is used for Component-SDI conversion.
(Continued on the next page)

Chapter 1 - Introduction
12
5&+
8+&'1+0
24'5'6
#7&+1+0
%1/210'06
%1/215+6'
58+&'1
5&+
$#.#0%'&
#'5'$7
5&+#0#.1)→&8
&8→5&+#0#.1)
70$#.#0%'&
#0#.1)#7&+1
+0276.'8'.
Engineered by Canopus
ADVC3000 connection example
VCR with
SD-SDI
input/output
SD component
video
RS-422
RS-422
Balanced audio
PC
DV camera
DV/DVCAM deck
IEEE 1394
SD-SDI
ADVC3000
Betacam
vDV to RS-422A conversion-driven VCR control
The ADVC3000 features DV to RS-422A conversion-driven VCR control. Its Perfect Sync
technology (patent pending) results in precise synchronization without frame skipping. Using DV
editing software, the ADVC3000 can import data from a wide range of professional VCRs. With two
systems of input/output terminals, the integrated system connecting the Betacam and the Digital
Betacam simultaneously can be established.
vProfessional specifications adaptable to a variety of studio uses
Equipped with TC input/output, ADVC3000 can perform conversion using LTC, DVITC and DV time
code in any direction. ADVC3000 is compatible with 4ch audio and can realize the conversion of
the balanced audio, embedded audio, AES, EBU and DV in any direction. ADVC3000 also has a
Sync Generator (Black Burst output) function, thus it can be introduced to a variety of studio/video
systems.
vEasy-to-use input source switching
With control buttons for switching the input source and peak meters on the easy-to-access front
panel, ADVC3000 enables easy settings with the help of the LCD display.
vHigh audio/video synchronism: “Locked Audio”
The ADVC3000 uses a “locked audio function” to digitize the audio signal by synchronizing it
precisely with the speed of the video signal. This function enables the easy conversion of long
duration content.
vVersatility with NTSC/PAL
As well as NTSC, which is the format used in Japan and US, PAL format, which is more common
in European and other countries, can also be selected.
*NTSC-PAL (SECAM) cannot be converted.
v2U rack-mount size
The ADVC3000, as a 19-inch 2U rack mountable unit, to EIA standard, includes full specifications
in a compact body. In addition, the ADVC3000, a stand-alone unit, does not need a PC.
*The rack-mount bracket and the screws are provided with the unit.
14
(Continued)

13
Chapter 2
Basic Operations
This chapter explains the basics of the ADVC3000,
such as part names, functions, etc.
- Part names and functions
- Connecting devices
- Menu setting operations
3000
15

Chapter 2 - Basic Operations
14
1Part names and functions
1-1. ADVC3000 front panel
The front panel of the ADVC3000 unit has the following controllers and indicators.
LCD
Displays input/output status and setting menu.
*The position of the average audio level is where the dial
clicks when you turn it.
PRESET button
Each time you press the
button, preset 1 to 4 is
recalled. (Refer to page 33
for details.)
MODE indicator
Displays the currently
selected operation mode.
MODE button
Refer to page 15 for
details.
POWER LED
POWER switch
Turn the ADVC3000 unit on and
off.
MENU button
Switches between Main screen and
Menu screen.
In sub-menu, press this button to
return to the main menu.
STATUS LED
Refer to page 15 for details.
Video input select button
[VIDEO IN]
Audio input select button
[AUDIO IN]
Chooses the video and audio
input format.
Video input indicator
Audio input indicator
Displays the video and audio
input format currently chosen.
Audio Input level dial (CH1 to CH4)
[ANALOG AUDIO INPUT LEVEL]
Adjusts the analog audio level input to
CH1 to CH4.
Turn clockwise to increase the input
level.
Audio level meter
[DIGITAL AUDIO PEAK METER]
Displays the peak level of the
audio currently output.
Select dial
Turn the Select dial to choose the menu items, and
press it to confrim.
16

Chapter 2 - Basic Operations
15
• MODE button
5&+#0#.1)ă&8
&8ă5&+#0#.1)
Used to switch on the operation mode of the ADVC3000. Pressing the button will activate the
Encode operation and Decode operation alternately.
When “SDI/ANALOG DV” LED illuminates, ADVC3000 converts input SDI or analog signal to DV
signal (DV Encode). When “DV SDI/ANALOG” LED illuminates, it converts input DV signal to SDI
signal and analog signal (DV Decode).
• STATUS LED
Displays the following status.
Off:.................... 9-pin remote control is disabled.
Lit green:.......... 9-pin remote control is enabled.
Lit red:.............. 9-pin remote control has been set to enabled, but remote control is prevented by
a communication error. Check that the 9-pin remote cable is correctly connected,
that the connected device’s power is ON, and that the remote control setting has
been enabled on the connected device.
Flashing red: ... A major ADVC3000 operation error has occurred, or several signals required
for operation can’t be detected. Check the error status display screen. Input the
required signals correctly or change the settings for ADVC3000.
* For more information on error status, see “Error status screen” (p.25).
17

Chapter 2 - Basic Operations
16
1-2. ADVC3000 rear panel
The rear panel of the ADVC3000 has the following connectors.
ANALOG AUDIO IN
(Balanced input)
Input connectors for balanced
audio signal.
S-VIDEO
Input and output connectors for S-Video signal.
COMPOSITE
Input and output connectors for
composite video signal.
ANALOG AUDIO OUT
(Balanced output)
Output connectors for
balanced audio signal.
ANALOG AUDIO IN
(Unbalanced input)
Input connectors for
unbalanced audio signal.
ANALOG AUDIO OUT
(Unbalanced output)
Output connectors for
unbalanced audio signal.
MONITOR
SDI IN/OUT
Input and output connectors for digial video and
embedded audio signals. When SDI input is
detected, the LED next to the SDI input
connector lights red. During SDI output, the LED
next to the SDI output connector lights red.
Output connectors for the monitor and speakers.
CH1 to CH4 audio can be chosen to be mixed and
output to L and R.
COMPONENT VIDEO
Input and output connectors for
component video signal.
18

Chapter 2 - Basic Operations
17
REF IN
Input connectors for receiving a reference signal
(sync signal).The LED lights red when reference
signal is detected and external sync setting is REF IN.
The REF connector has through output. If a cable is
not connected to the output connector, it has a 75 j
automatic terminaltion.
TC
Time code input
and output
connectors.
REMOTE A/B
Remote control connector.
Select “REMOTE A” or
“REMOTE B” from the
menu.
AC IN
Connect the provided
power cord and then fix it
with the provided power
cord clamp (refer to
page10).
DIP switch
DV1 (6-pin)
Use a DV cable to connect the
ADVC3000 to a DV device or a PC.
(Bus power is not supplied.)
DV2 (4-pin)
Use a DV cable to connect the
ADVC3000 to a DV device or a
PC.
REF OUT
Output connector for reference
signal (sync signal).
Earth terminal
Connect an earth
wire to this terminal,
if necessary.
Refer to page 18 for
details.
DIGITAL AUDIO OUT
Digital audio output connectors.
DIGITAL AUDIO IN
Digital audio input connectors.
NOTES
- This unit will not work as an OHCI Hub with Canopus DV products.
- To use this unit as a Hub with OHCI devices, the application also needs to support two or more
devices.
19

Chapter 2 - Basic Operations
18
1-3. DIP switch settings
The rear panel of the ADVC3000 unit has the following DIP switches. Default SW3, SW4 settings may
differ depending on the place of purchase.
PHY SPEED
Update Mode
Video Format
PAL/SECAM
(When SW3 is set to ON)
NTSC Setup Level
(When SW3 is set to OFF)
S400
Normal
NTSC
PA L
0 IRE
S200
Update
PA L
SECAM
7.5 IRE
Reserved
Reserved
• SW1: PHY Speed
Designates the PHY speed.
OFF: S400 ON: S200
• SW2: Update Mode
Used to update the internal software.
(Set this switch to the OFF position for normal operations.)
OFF: Normal ON: Update
• SW3: Video Format
Designates the video signal format.
* Enabled only when the setting in the menu option “107 video standard” is “set by DIP switch”.
OFF: NTSC ON: PAL
• SW4: PAL/SECAM (When SW3 is set to ON)
* Enabled only when the setting in the menu option “107 video standard” is “set by DIP switch”.
OFF: PAL ON: SECAM
: NTSC Setup Level (When SW3 is set to OFF)
* Enabled only when the setting in the menu option “107 video standard” is “set by DIP switch”.
OFF: 0 IRE ON: 7.5 IRE
• SW5: Reserved
Not used. (Set this switch to the OFF position for normal operations.)
• SW6: Reserved
Not used. (Set this switch to the OFF position for normal operations.)
CAUTION
• Turn off the power of ADVC3000 unit before making any changes for DIP switch settings.
• DIP switches 5 and 6 should be set to OFF. Otherwise, malfunction may occur.
20

Chapter 2 - Basic Operations
19
1-4. LCD screen displays
ADVC3000 has three main screens and an error status screen. Turn the Select dial to switch between
the main screens and the error status screen. Pressing the MENU button displays the setting menu
screen.
Main screens 1 and 2
Main screens 1 and 2 differ from each other only in the right portion of the third line (Item 6, below).
This screen shows the current status of the operation.
• In the SDI/ANALOG DV mode
1. Video Input
Displays the video source.
3. Audio Input
Displays the audio status.
5. Deck status
Displays the status of the deck.
4. Audio format
Displays input channel
and DV encode sampling
frequency.
2. Preset status
Displays the preset status
of video/audio input.
(Refer to page 33 for
details.)
Displays the remote
control connector in use.
8. 9-pin remote control
Displays the time code.
6. On the Main screen 1:
Input time code
Displays the number
designated by the user for
identifying each tape.
6. On the Main screen 2:
Users bit
Displays the audio input on each
monitor.
7. Audio monitor status
(Continued on the next page)
21

Chapter 2 - Basic Operations
20
1. Video input
SDI..............................Signal from the SDI connector is input.
COMPONENT ............Signal from the component connector is input.
S VIDEO .....................Signal from the S-Video connector is input.
COMPOSITE ..............Signal from the composite connector is input.
SG...............................Color bar is output.
2. Preset status
Displays the preset status of video/audio input.
(Refer to page 33 for how to store and recall the settings.)
[1]................................Preset 1 is selected.
[2]................................Preset 2 is selected.
[3]................................Preset 3 is selected.
[4]................................Preset 4 is selected.
[-].................................Setting other than preset 1 to 4 is selected.
3. Audio input
SDI..............................Signal from the SDI input connector is input.
AES.............................Signal from the digital audio input connector is input.
BAL. ............................Signal from the balanced audio input connector is input.
UNBAL........................Signal from the unbalanced audio input connector is input.
SG...............................1kHz test audio is output.
4. Audio format
CH 1-4 > 32 k..............Converts the input audio signal CH1 to 4 to 32kHz, 12bit, 4ch audio.
CH 1/2 > 48 k..............Converts the input audio signal CH1 and 2 to 48kHz, 16bit, 2ch audio.
CH 3/4 > 48 k..............Converts the input audio signal CH3 and 4 to 48kHz, 16bit, 2ch audio.
5. Deck status
If blank ........................9-pin remote control is not in use.
NoDev.........................Can’t find deck. Check cable connection.
PLAY...........................Deck is playing.
PLAY*..........................Deck is playing. (SERVO LOCK)
REC ............................Deck is recording.
REC*...........................Deck is recording. (SERVO LOCK)
F.FWD.........................Deck is fast-forwarding.
REW ...........................Deck is rewinding.
STOP ..........................Deck is stopped.
PAUSE ........................Deck is shuttling. (Paused)
SHUTL ........................Deck is shuttling.
EJECT ........................No tape in deck.
(Continued)
22