GRASS VALLEY K2 DYNO PA - V1.5 User manual

K2 Dyno PA
LIVE EVENT MANAGEMENT SYSTEM
User Manual
Software Version 1.5
071-8762-01
October 2010

Affiliate with the N.V. KEMA in The Netherlands
CERTIFICATE
Certificate Number: 510040.001
The Quality System of:
Thomson Inc, and it’s wordwide Grass Valley division affiliates DBA
GRASS VALLEY
Headquarters
400 Providence Mine Rd
Nevada City, CA 95959
United States
15655 SW Greystone Ct.
Beaverton, OR 97006
United States
10 Presidential Way
Suite 300
Woburn, MA 01801
United States
Kapittelweg 10
4827 HG Breda
The Nederlands
7140 Baymeadows Way
Ste 101
Jacksonville, FL 32256
United States
2300 So. Decker Lake Blvd.
Salt Lake City, UT 84119
United States
Rue du Clos Courtel
CS 31719
35517 Cesson-Sevigné Cedex
France
1 rue de l’Hautil
Z.I. des Boutries BP 150
78702 Conflans-Sainte
Honorine Cedex
France
Technopole Brest-Iroise
Site de la Pointe du Diable
CS 73808
29238 Brest Cedex 3
France
40 Rue de Bray
2 Rue des Landelles
35510 Cesson Sevigné
France
Spinnereistrasse 5
CH-5300 Turgi
Switzerland
Brunnenweg 9
D-64331 Weiterstadt
Germany
Carl-Benz-Strasse 6-8
67105 Schifferstadt
Germany
Including its implementation, meets the requirements of the standard:
ISO 9001:2008
Scope:
The design, manufacture and support of video and audio hardware and software products and
related systems.
This Certificate is valid until: June 14, 2012
This Certificate is valid as of: June 14, 2009
Certified for the first time: June 14, 2000
H. Pierre Sallé
President
KEMA-Registered Quality
The method of operation for quality certification is defined in the KEMA General Terms
And Conditions For Quality And Environmental Management Systems Certifications.
Integral publication of this certificate is allowed.
KEM
A
-Registered Quality, Inc.
4377 County Line Road
Chalfont, PA 18914
Ph: [phone]
Fax: [phone]
CRT 001 073004
A
ccredited By:
ANAB
Affiliate with the N.V. KEMA in The Netherlands
CERTIFICATE
Certificate Number: 510040.001
The Quality System of:
Thomson Inc, and its worLdwide Grass Valley division affiliates DBA
GRASS VALLEY
Headquarters
400 Providence Mine Rd
Nevada City, CA 95959
United States
15655 SW Greystone Ct.
Beaverton, OR 97006
United States
10 Presidential Way
Suite 300
Woburn, MA 01801
United States
Kapittelweg 10
4827 HG Breda
The Nederlands
7140 Baymeadows Way
Ste 101
Jacksonville, FL 32256
United States
2300 So. Decker Lake Blvd.
Salt Lake City, UT 84119
United States
Rue du Clos Courtel
CS 31719
35517 Cesson-Sevigné Cedex
France
1 rue de l’Hautil
Z.I. des Boutries BP 150
78702 Conflans-Sainte
Honorine Cedex
France
Technopole Brest-Iroise
Site de la Pointe du Diable
CS 73808
29238 Brest Cedex 3
France
40 Rue de Bray
2 Rue des Landelles
35510 Cesson Sevigné
France
Spinnereistrasse 5
CH-5300 Turgi
Switzerland
Brunnenweg 9
D-64331 Weiterstadt
Germany
Carl-Benz-Strasse 6-8
67105 Schifferstadt
Germany
Including its implementation, meets the requirements of the standard:
ISO 9001:2008
Scope:
The design, manufacture and support of video and audio hardware and software products and
related systems.
This Certificate is valid until: June 14, 2012
This Certificate is valid as of: June 14, 2009
Certified for the first time: June 14, 2000
H. Pierre Sallé
President
KEMA-Registered Quality
The method of operation for quality certification is defined in the KEMA General Terms
And Conditions For Quality And Environmental Management Systems Certifications.
Integral publication of this certificate is allowed.
KEMA-Registered Quality, Inc.
4377 County Line Road
Chalfont, PA 18914
Ph: [phone]
Fax: [phone]
CRT 001 073004
Accredited By:
ANAB

K2 Dyno PA
LIVE EVENT MANAGEMENT SYSTEM
User Manual
Software Version 1.5
071-8762-01
October 2010

4K2 Dyno PA User Manual October 15, 2010
Copyright Copyright © Grass Valley, Inc. All rights reserved. Printed in the United States of America.
Portions of software © 2000 – 2009, Microsoft Corporation. All rights reserved. This document
may not be copied in whole or in part, or otherwise reproduced except as specifically permitted
under U.S. copyright law, without the prior written consent of Grass Valley, Inc., P.O. Box
59900, Nevada City, California 95959-7900. This product may be covered by one or more U.S.
and foreign patents.
Disclaimer Product options and specifications subject to change without notice. The information in this
manual is furnished for informational use only, is subject to change without notice, and should
not be construed as a commitment by Grass Valley, Inc. Grass Valley, Inc. assumes no
responsibility or liability for any errors or inaccuracies that may appear in this publication.
U.S. Government
Restricted Rights
Legend
Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause
at DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer
Software Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Grass
Valley, Inc., P.O. Box 59900, Nevada City, California 95959-7900 U.S.A.
Trademarks and
Logos Grass Valley, K2, Aurora, Summit, Dyno, Solo, Infinity, Turbo, Profile, Profile XP, NetCentral,
NewsBrowse, NewsEdit, NewsQ, NewsShare, NewsQ Pro, and Media Manager are either
registered trademarks or trademarks of Grass Valley, Inc. in the United States and/or other
countries. Grass Valley, Inc. products are covered by U.S. and foreign patents, issued and
pending. Additional information regarding Grass Valley, Inc. trademarks and other proprietary
rights may be found at www.grassvalley.com.
Other trademarks and logos used in this document are either registered trademarks or
trademarks of the manufacturers or vendors of the associated products, such as Microsoft®
Windows® operating system, Windows Media® player, Internet Explorer® internet browser,
and SQL Server™. QuickTime and the QuickTime logo are trademarks or registered
trademarks of Apple Computer, Inc., used under license therefrom.

Contents
Grass Valley Product Support..................................................................................................7
About the K2 Dyno PA User Manual .......................................................................................9
Chapter 1: About K2 Dyno Production Assistant...................................................11
About K2 Dyno Production Assistant....................................................................................12
Using K2 Dyno PA ................................................................................................................13
About bins.............................................................................................................................14
About repositories.................................................................................................................14
About K2 Dyno PA User Interface.........................................................................................14
Customizing the K2 Dyno PA user interface..........................................................................17
About user layouts and preferences......................................................................................19
Sharing assets and information between multiple K2 Dyno PA clients..................................20
Chapter 2: Starting Dyno PA....................................................................................23
Starting the K2 Dyno PA application......................................................................................24
Chapter 3: Logging and keywords...........................................................................25
About K2 Dyno PA metadata and logging keywords.............................................................26
Creating a K2 Dyno PA keyword ..........................................................................................26
Renaming a K2 Dyno PA keyword ........................................................................................26
Deleting a K2 Dyno PA keyword ...........................................................................................27
Applying (logging) a keyword in K2 Dyno PA........................................................................27
Applying (logging) a keyframe in K2 Dyno PA.......................................................................28
Cueing a keyframe in an asset..............................................................................................28
Deleting a keyframe...............................................................................................................28
Creating a keyword category ................................................................................................29
Renaming a keyword category..............................................................................................29
Deleting a keyword category.................................................................................................29
Exporting K2 Dyno PA keywords to a K2 Dyno Controller.....................................................30
Exporting K2 Dyno PA keywords to another Dyno PA ..........................................................30
Importing K2 Dyno PA keywords ..........................................................................................30
Chapter 4: Searching assets....................................................................................31
Creating a search query in K2 Dyno PA................................................................................32
Editing a search in K2 Dyno PA.............................................................................................32
Deleting a search in K2 Dyno PA .........................................................................................33
Chapter 5: Working with assets, bins, and folders ................................................35
Creating a clip.......................................................................................................................36
Creating a subclip..................................................................................................................36
Copying assets......................................................................................................................37
Copying an asset to a repository...........................................................................................37
Playing an asset or playlist....................................................................................................38
15 October 2010 Dyno Production Assistant User Manual 5
Contents

Renaming an asset ..............................................................................................................38
Deleting an asset ..................................................................................................................39
Adding a repository...............................................................................................................39
Adding a bin..........................................................................................................................40
Editing a repository ...............................................................................................................41
Deleting a repository or bin...................................................................................................41
Chapter 6: Transferring Assets with K2 Dyno PA...................................................43
Transferring assets automatically with rules..........................................................................44
Editing a rule .....................................................................................................................45
Deleting a rule....................................................................................................................46
Checking an asset for rules ..............................................................................................46
Canceling an active transfer .............................................................................................46
Transferring scheduled assets ..............................................................................................46
Transferring assets manually.................................................................................................48
Chapter 7: Playlists...................................................................................................49
Creating a playlist..................................................................................................................50
Editing a playlist.....................................................................................................................51
Deleting a playlist..................................................................................................................52
Renaming a playlist ..............................................................................................................52
Copying a playlist .................................................................................................................52
6Dyno Production Assistant User Manual 15 October 2010
Contents

GrassValley Product Support
To get technical assistance, check on the status of a question, or to report a new issue,
contact Grass Valley Product Support via e-mail, the Web, or by phone or fax.
WebTechnical Support
To access support information on the Web, visit the product support Web page on the
Grass Valley Web site.You can download software or find solutions to problems.
World Wide Web: http://www.grassvalley.com/support/
Technical Support E-mail Address: [e-mail]
Telephone Support
Use the following information to contact Product Support by phone.
International Support Centers
Our international support centers are available 24 hours a day, 7 days a week.
In countryToll freeSupport Center
[phone]+800 80 80 20 20France
[phone]+1 800 547 8949United States
Authorized Local Support Representative
A local support representative may be available in your country. To locate a support
center during normal local business hours, refer to the following list. This list is
regularly updated on the website for Grass Valley Product Support
(http://www.grassvalley.com/support/contact/phone/)
After–hours local phone support is also available for warranty and contract customers.
TelephoneCountryRegion
[phone]ChinaAsia
[phone]Hong Kong, Taiwan, Korea,
Macau
[phone]Japan
[phone]Southeast Asia - Malaysia
[phone]Southeast Asia - Singapore
15 October 2010 Dyno Production Assistant User Manual 7

TelephoneCountryRegion
[phone]India
1 300 721 495AustraliaPacific
0800 846 676New Zealand
[phone]For callers outsideAustralia
or New Zealand
[phone]AllCentral America,
South America
[phone];
[phone]
North America, Mexico,
Caribbean
North America
[phone]UK, Ireland, IsraelEurope
[phone]Benelux –Netherlands
[phone]Benelux –Belgium
[phone];
[phone]
France
[phone]Germany, Austria,
Eastern Europe
[phone]Belarus, Russia,
Tadzhikistan, Ukraine,
Uzbekistan
[phone]Northern Europe
[phone]Southern Europe –Italy
[phone]Southern Europe –Spain
[phone]Middle EastMiddle East, Near East,
Africa [phone];
[phone]
Near East and Africa
8Dyno Production Assistant User Manual 15 October 2010
Grass Valley Product Support

About the K2 Dyno PA User Manual
This manual is intended for users of the K2 Dyno Production Assistant™(Dyno PA)
application; it describes concepts and tasks that pertain to operating Dyno PA. For
information on administrator tasks such as installing and configuring Dyno PA, see
the K2 Dyno Production Assistant Configuration Manual.
15 October 2010 Dyno Production Assistant User Manual 9

Chapter 1
About K2 Dyno Production Assistant
This section contains the following topics:
•About K2 Dyno Production Assistant
•Using K2 Dyno PA
•About bins
•About repositories
•About K2 Dyno PA User Interface
•Customizing the K2 Dyno PA user interface
•About user layouts and preferences
•Sharing assets and information between multiple K2 Dyno PA clients
15 October 2010 Dyno Production Assistant User Manual 11

About K2 Dyno Production Assistant
K2 Dyno Production Assistant (Dyno PA) is a software platform composed of the
Dyno PA application and the Grass Valley platform service. The platform service
allows users on various Dyno PA clients to access assets as well as share saved
searches, keywords, and transfer rules.
NOTE: The Dyno PA application can be used with K2 Media Clients, K2 Summit
Production Clients, and K2 Solo Media Servers.When a procedure can be applied
to any of these, the term K2 system is used. A K2 Summit Production Client with
internal storage is referred to as a standalone K2 Summit system. A K2 Summit
Production Client with external storage (an FSM server and a RAID) is referred to
as a K2 Summit SAN system.Where a procedure can be applied to a K2 Summit
Production Client (in a standalone or SAN system) or a K2 Solo Media Server, the
termK2Summit system is used. The Dyno PA application runs onamachinereferred
to as the Dyno PA client.
Dyno PA can manage various K2 systems to perform several different tasks.
12 Dyno Production Assistant User Manual 15 October 2010
About K2 Dyno Production Assistant

Using K2 Dyno PA
This section describes three of the common workflows for the K2 Dyno PA application.
Content Management/Controller workflow
This workflow describes a role that principally deals with assets. The user can be
manually exporting or transferring assets about the network, creating playlists, loading
assets onto managed channels, creating rules for automatic transfers/exports, creating
searches, managing repositories, setting up scheduled transfers, and adding keywords
to assets.
Logger workflow
This workflow is more about metadata enrichment of record trains from the K2 Dyno
Replay Controller. Users load source clips into the Browse pane and then using the
keyframe logging mode add keyframes (keywords with timecode context) to assets.
Users can also add Dyno PA keywords to Dyno highlights or other assets in the system.
Judiciary/Review workflow
This workflow describes the use of the Browse pane to review footage from a live
event from multiple angles, possibly as part of a formal judiciary process such as a
video referee. The Browse, RecordingAssets and Keyframe panes are used to quickly
find points within the record trains and then to switch between trains keeping the
current timecode context.
15 October 2010 Dyno Production Assistant User Manual 13
About K2 Dyno Production Assistant

About bins
Bins are folders on a K2 system.You can create or delete a bin on a K2 system, but
bins cannot be renamed from K2 Dyno PA.
About repositories
A K2 Dyno PA repository can be used to transfer, import or export assets.A repository
acts as a shortcut to a location on the network that can be used to transfer assets from
or to Dyno PA. If you delete a repository from Dyno PA, the shortcut is deleted; the
assets in the repository itself are not affected.
In Dyno PA there are two types of repositories:
•K2 system repository
K2 system repositories simply represent a bin on a K2 system in Dyno PA. Creating
a K2 system repository allows you quick access to that bin. For example, if a bin
is nested under several parent folders on a K2 system, creating a K2 system-based
repository for this bin displays it under the top-level repository section in the
Navigator pane, which makes it easy to locate. As a repository, you can also give
the bin to a name more applicable to your particular workflow.
•File System repository
File system repositories import and export assets to and from K2 systems. Examples
of file-system based repositories include: a USB drive mounted on a connected
PC, a NetworkAttached Storage (NAS) drive, or anApple Macintosh-shared drive.
About K2 Dyno PA User Interface
The K2 Dyno PA user interface is composed of several panes that can be hidden or
dragged to different areas of the screen. Highlighted items, such as bins, playlists, or
managed channels, are displayed with a blue background.
14 Dyno Production Assistant User Manual 15 October 2010
About K2 Dyno Production Assistant

The Dyno PA panes are described below.
NOTE: If your Dyno PA system is not licensed to use a particular feature, that pane
is not displayed in the Dyno PA application.
Navigator pane: Lists all the K2 systems that have been added as a server to the Dyno
PA client, the current Dyno session, bins (folders on a K2 system), repositories (folders
on a user-defined location), and any search queries that have been saved. The Refresh
and Filter buttons let you update the list or select which K2 systems you want
to display. You can add, edit or delete servers, bins, repositories, and searches in this
pane.
Server Information pane: If a K2 system in the Navigator pane is highlighted, the
Server Information pane displays, showing the status and version information of that
K2 system. When the K2 system is not highlighted, the Server Information pane is
not accessible.
15 October 2010 Dyno Production Assistant User Manual 15
About K2 Dyno Production Assistant

Playlist pane: Displays the playlist currently being edited. In this pane, clicking the
Locate button causes theAsset List pane to display the bin on the K2 system
where this playlist is located.
Asset List pane: Lists, either in thumbnail or list view, all the assets on the bin,
repository, or Dyno session currently highlighted in the Navigator pane. The Filter
button lets you view all the assets in a system or view assets from a specific camera
angle. The Sort button lets you group assets by criteria such as name, creation
date, rating, and so on.
Rules pane: Displays all the rules currently configured. In this pane, you can add,
edit, activate or delete rules that tell K2 Dyno PA when to transfer an asset and where
to transfer it to. Clicking the Rules tab displays the Rules pane if it is covered by other
panes.
Managed Channels pane: Displays all the currently configured record and play
channels on K2 systems that can be controlled through the Dyno PA application. If
you have administrator-level privileges on Dyno PA, you can add, edit, or delete
channels in addition to playing, recording, stopping, fast-forwarding, rewinding, or
ejecting assets or putting an asset in loop playback mode. Clicking the Managed
Channels tab displays the Managed Channels pane if it is covered by other panes.
Recording Assets pane: Displays all the records currently in progress on the K2
systems.You can view the records in list or thumbnail view, browse a record or load
it to one of the K2 systems. The tabs above the record trains let you choose whether
to view record trains on one K2 system or all available systems. Clicking the Recording
Assets tab displays the Recording Assets pane if it is covered by other panes.
Transfer Scheduler pane: Displays the scheduled transfers.You can add, edit, cancel
or delete scheduled transfers in this pane. Clicking the Transfer Scheduler tab displays
the Transfer Scheduler pane if it is covered by other panes.
Browse pane:Allows you to load assets from a K2 Summit system and view them in
Dyno PA.You can create cue points, mark in or mark out points, create subclips,
unload the asset or locate it in the Asset List, and toggle between Live mode and
Keyframe Logging mode. In this pane, clicking the Locate button causes the
Asset List pane to display the bin on the K2 Summit system where the asset loaded
in the Browse pane is located.
Info pane: Allows you to view the video and keyword information of a highlighted
asset. Clicking the Info tab displays the Info pane if it is covered by other panes. In
this pane, clicking the Locate button causes theAsset List pane to display the
bin on the K2 system where the asset loaded in the Info pane is located.
Active Transfer pane: Allows you to view transfers currently in progress as well as
failed transfers, if any. Clicking the Active Transfer tab displays the Active Transfer
pane if it is covered by other panes.
16 Dyno Production Assistant User Manual 15 October 2010
About K2 Dyno Production Assistant

Completed Transfer pane: Allows you to view the status of completed transfers.
Clicking the Completed Transfers tab displays the Completed Transfer pane if it is
covered by other panes.
Quick Logging pane: Allows you to associate Dyno PA keywords and keyframes
(keywords linked to a specific timecode) with assets or remove them from assets.You
can also add, edit, delete or export Dyno PA keywords from categories and view Dyno
keywords and ratings. Clicking the Quick Logging tab displays the Quick Logging
pane if it is covered by other panes.
Menu Ribbon: The menu is based on theWindows Ribbon interface. When you click
on the Lock button , the menu ribbon displays. If you double click on the button,
the menu remains fixed at the top of the user interface. Double clicking the button
again hides the menu ribbon again.
Customizing the K2 Dyno PA user interface
The K2 Dyno PA interface is based on the standard Microsoft Dockable Windows
user interface. The Asset List pane is fixed; it cannot be moved or closed. However,
you can arrange the other panes around it, which effectively moves theAsset List pane
in relation to the other panes.
Any changes made to your layout are automatically saved when you log out of the
Dyno PA application. The layout information is saved by the Grass Valley platform
service, so your customized layout can be accessed, if you log into Dyno PA with the
same username and password, from any Dyno PA client that shares that particular
Grass Valley platform service.
1. To close or hide/unhide a pane in Dyno PA, you can do the following:
•To hide a pane, click the Thumbtack button . A hidden pane remains off to
the side, with only its title visible. This allows you to customize the interface
for a particular workflow. For example, you could close down some panes so
that you can view more assets at one time in the Asset List pane.
•To display a hidden pane briefly, hover the mouse over the pane title.
•To unhide the pane, hover the mouse over the pane title and then click the
Thumbtack button.
•To close the pane click the Xin the upper-right corner of the pane.
•To open the pane up again, right-click on the title of another pane and select
the closed pane from the options. In the following illustration, the Quick Logging
pane has been closed, and right-clicking on the title of the Browse pane displays
the Quick Logging pane unchecked.
15 October 2010 Dyno Production Assistant User Manual 17
About K2 Dyno Production Assistant

NOTE: This list displays the panes that are visible; that is, panes that are not
hidden beneath other panes. For example, the Completed Transfers pane is
not shown here because it is hidden beneath the Quick Logging pane. The
Customize pane is not available in this release.
2. To move a pane around in Dyno PA, you can do the following:
•To open a pane as a separate window, double click the pane status bar. To restore
a pane to its previous location, double click the pane status bar again.
•To drag a pane from one location to another in the user interface:
a) Click the status bar and hold the mouse button down.
While the mouse button is being held down, a cursor appears and direction
arrows are displayed in the center of the user interface and on each side of
the screen.
b) Drag the cursor until it is over the arrow where you want the pane to be placed.
c) Release the mouse button.
The pane appears in the new location.
18 Dyno Production Assistant User Manual 15 October 2010
About K2 Dyno Production Assistant

3. If panes are grouped together, you can separate one of the panes from its group by
clicking on its tab and dragging it to another section of the UI. To add a pane to a
group, drag the pane to the group and drop it onto the center of the four-way arrow.
4. To change the font type, style, or size, select Users & Preferences from the menu
and select the desired font options.
5. Layouts are automatically saved on the Grass Valley platform service PC when
you exit the Dyno PA application. To export a layout, select Users & Preferences
from the menu and click the Save Layout button.
6. To open a layout that has been stored locally, select Users & Preferences from the
menu and click the Load Layout button.
7. To restore the default layout, select Users & Preferences from the menu, highlight
the user, clickDefault Layout and then click Yes.
When you next restart Dyno PA, the layout returns to the default settings.
About user layouts and preferences
If you customize the K2 Dyno PA user interface, the layout is automatically saved
when you log out of the application. The layout information is saved by the Grass
Valley platform service; if you log into any Dyno PA client using that particular Grass
Valley platform service, the layout is displayed. Multiple users can log in using the
15 October 2010 Dyno Production Assistant User Manual 19
About K2 Dyno Production Assistant

same login information.You can export the layout information to an XML file. This
file can be saved as a backup or imported into another Dyno PA client. Another user
can also import this layout, overwriting their own layout.
Layouts can be customized in several ways. If you select Users & Preferences from
the menu, you can:
•Add guard bands: Also referred to as handles, guard bands add seconds to the
beginning and end of an asset. To apply guard bands to an asset, either the transfer
type must be GXF or the transfer must be from and to a K2 Summit system.
•UseDynoMarksforTransfer/Export: If you check this box, Dyno PA uses Mark
In and Mark Out points that were automatically added to the asset by a Dyno Replay
Controller.
•Create reference file for QuickTime exports:If this box is checked, Dyno PA
creates a Quicktime reference file that an editor can use while the transfer is in
progress.
•When using drag and drop create copy of the asset instead of a shortcut: By
default, dragging and dropping an asset within a K2 system, for example from bin
to bin, creates a shortcut pointing to the orignal asset rather than an entirely new
copy of the asset. If you check this box, Dyno PA creates an entirely new copy of
the asset when you copy and paste.
•Change the list font: Changes the font, size, and style of the text for each pane in
Dyno PA, with the exception of the Browse and Info panes.
•Load or save a layout:You can arrange the Dyno PA panes for your particular
workflow and save the layout, or import a previously saved layout. For information
on how to load or save a layout, see Customizing the K2 Dyno PA User Interface.
Layouts can be customized for a particular workflow.You can close or rearrange the
individual panes (except the Asset List pane).
For example, you could create a login specifically for transferring assets, with only
the following panes showing:Active Transfers, Completed Transfers, Transfer
Scheduler, and Rules. Everytime you log in with that username and password, the
layout would be set up for monitoring transfers.
If you wanted to have one or more users adding keywords to assets (logging), you
could create a layout designed for browsing and logging, with the following panes:
Info, Quick Logging, and Browse.
Sharing assets and information between multiple K2 Dyno PA
clients
You can have multiple K2 Dyno PA clients accessing the same assets, rules, and
searches through one Grass Valley platform service.
If multiple Dyno PA clients share the same GrassValley platform service, the different
clients share:
20 Dyno Production Assistant User Manual 15 October 2010
About K2 Dyno Production Assistant