GRASS VALLEY KAYENNE 2.0 - S 10-2010 Instruction Manual

KAYENNE
VIDEO PRODUCTION CENTER
Release Notes
Software Version 2.0
071868702
OCTOBER 2010

Affiliate with the N.V. KEMA in The Netherlands
CERTIFICATE
Certificate Number: 510040.001
The Quality System of:
Thomson Inc, and its worLdwide Grass Valley division affiliates DBA
GRASS VALLEY
Headquarters
400 Providence Mine Rd
Nevada City, CA 95959
United States
15655 SW Greystone Ct.
Beaverton, OR 97006
United States
10 Presidential Way
Suite 300
Woburn, MA 01801
United States
Kapittelweg 10
4827 HG Breda
The Nederlands
7140 Baymeadows Way
Ste 101
Jacksonville, FL 32256
United States
2300 So. Decker Lake Blvd.
Salt Lake City, UT 84119
United States
Rue du Clos Courtel
CS 31719
35517 Cesson-Sevigné Cedex
France
1 rue de l’Hautil
Z.I. des Boutries BP 150
78702 Conflans-Sainte
Honorine Cedex
France
Technopole Brest-Iroise
Site de la Pointe du Diable
CS 73808
29238 Brest Cedex 3
France
40 Rue de Bray
2 Rue des Landelles
35510 Cesson Sevigné
France
Spinnereistrasse 5
CH-5300 Turgi
Switzerland
Brunnenweg 9
D-64331 Weiterstadt
Germany
Carl-Benz-Strasse 6-8
67105 Schifferstadt
Germany
Including its implementation, meets the requirements of the standard:
ISO 9001:2008
Scope:
The design, manufacture and support of video and audio hardware and software products and
related systems.
This Certificate is valid until: June 14, 2012
This Certificate is valid as of: June 14, 2009
Certified for the first time: June 14, 2000
H. Pierre Sallé
President
KEMA-Registered Quality
The method of operation for quality certification is defined in the KEMA General Terms
And Conditions For Quality And Environmental Management Systems Certifications.
Integral publication of this certificate is allowed.
KEMA-Registered Quality, Inc.
4377 County Line Road
Chalfont, PA 18914
Ph: [phone]
Fax: [phone]
CRT 001 073004
Accredited By:
ANAB

KAYENNE
VIDEO PRODUCTION CENTER
Release Notes
Software Version 2.0
071868702
OCTOBER 2010

4 KAYENNE — Release Notes
Contacting Grass Valley
Copyright © Grass Valley, Inc. All rights reserved.
This product may be covered by one or more U.S. and foreign patents.
Grass Valley Web Site
The www.grassvalley.com web site offers the following:
Online User Documentation — Current versions of product catalogs, brochures,
data sheets, ordering guides, planning guides, manuals, and release notes
in .pdf format can be downloaded.
FAQ Database — Solutions to problems and troubleshooting efforts can be
found by searching our Frequently Asked Questions (FAQ) database.
Software Downloads — Download software updates, drivers, and patches.
International
Support Centers
France
24 x 7 [phone] or [phone] United States/Canada 24 x 7 [phone] or [phone]
Local Support
Centers
(available
during normal
business hours)
Asia
Hong Kong, Taiwan, Korea, Macau: [phone] Indian Subcontinent: [phone]
Southeast Asia/Malaysia: [phone] Southeast Asia/Singapore: [phone]
China: [phone] Japan: [phone]
Australia and New Zealand: [phone] Central/South America: [phone]
Middle East: [phone] Near East and Africa: [phone] or [phone]
Europe
Belarus, Russia, Tadzikistan, Ukraine, Uzbekistan: [phone] Switzerland: [phone]
S. Europe/Italy-Roma: [phone] -Milan: [phone] S. Europe/Spain: [phone]
Benelux/Belgium: [phone] Benelux/Netherlands: [phone] N. Europe: [phone]
Germany, Austria, Eastern Europe: [phone] UK, Ireland, Israel: [phone]

KAYENNE — Release Notes 5
Contents
Contents
Kayenne Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Changes in Release 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
New in Release 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Improved in Release 2.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Limitations in Release 2.0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2.0 Upgrade Effects Existing E-MEMs: Bus Linking and eDPM Timelines . . . 10
Bus Linking and E-MEM Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
eDPM Effects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
ClipStore (Image Store Clips) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Summit/Solo Software Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
System Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Basic Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Summit Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Kayenne System Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Kayenne Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ClipStore Config Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
ClipStore as an External Device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Kayenne Control Panel Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ClipStore Menu Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Clip Replay . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Replay with E-MEMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Recording Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Editing Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
File Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Changes to the Stills Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Key Chaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Creating Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Using Key Cut/Auto Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Key Chaining on a Single ME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Key Chaining Across MEs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Multiple Bus Linking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Configuring Source Substitution Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Source Table File Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Linking Multiple Busses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Parallel Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Cascading Bus Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Corner Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Corner Pinning and Cropping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Corner Pinning Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Corner Pinning with the Multi-Function Module . . . . . . . . . . . . . . . . . . . . . . . . 71
eDPM Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
eDPM Partitioning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
eDPM Definable Sub-levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Device Control Module Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Q-MEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Learning a Q-MEM Register with a Single Device. . . . . . . . . . . . . . . . . . . . . . . . 78

6 KAYENNE — Release Notes
Contents
Learning a Q-MEM Register with Multiple Devices . . . . . . . . . . . . . . . . . . . . . . 78
Learning Devices with Letter Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Learning Additional Devices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Learning Only Device Associations into a Register. . . . . . . . . . . . . . . . . . . . . 80
Learning Clips for Devices without Affecting Letter Button Associations . 80
Cues and Gangs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Status Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Gangs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Ganging Devices Associated with Lettered Buttons . . . . . . . . . . . . . . . . . . . . 82
Ganging Additional Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Control Panel Enhancements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Copy Swap Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Copy Swap ME Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Copy Swap Wipes Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Wipe Generator Buttons in the To Pane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Copying Transition and Keyer Wipes Directly . . . . . . . . . . . . . . . . . . . . . . . . 87
Copying Between Transition and Key Wipes. . . . . . . . . . . . . . . . . . . . . . . . . . 88
Copying with eDPM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Copy Swap Mattes Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Copy Swap Keyer Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Copy Swap Source Memory Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Copy Swap Macro Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Copy Swap Timeline Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Copy Swap and the Multi-Function Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
SetDef MatchDef. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Source Ops, SetDef MatchDef Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
SetDef Output Conversion. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
MatchDef Input Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
E-MEM Control of SetDef MatchDef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
SetDef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
MatchDef . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
E-MEM of Key Priority Transitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Key Store Enhancements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Key Store Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Grabbing and Using a Key Store Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Macros Attached to Buttons without Colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Satellite Panel Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Single Module Satellite Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Double Module Satellite Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Satellite Panel Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
PCU Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Internal Cabling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Setting the Summit/Solo IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Remote Desktop Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Changing the Summit/Solo IP Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Kayenne Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Materials Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Software Update Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Backup Current Configuration and Effects Files . . . . . . . . . . . . . . . . . . . . . . 115
Deploy Kayenne Update Package Files and Installer . . . . . . . . . . . . . . . . . . 115
Kayenne Installer Program Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
System Update (Video Processor Frame & Control Panels). . . . . . . . . . . . . 120
Kayenne Menu Panel Application Installation/Update . . . . . . . . . . . . . . . . 122

KAYENNE — Release Notes 7
Contents
Clear NV RAM for Control Panel and Frame . . . . . . . . . . . . . . . . . . . . . . . . . 127
Calibrate the Lever Arm and Joystick. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Update Additional Kayenne Menu Panels or PCs . . . . . . . . . . . . . . . . . . . . . 128
First Time Kayenne Menu on PC Installation . . . . . . . . . . . . . . . . . . . . . . . . . 128
NetConfig and Newton Configurator Installation . . . . . . . . . . . . . . . . . . . . . 129
Macro Editor Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Check Software Versions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Confirm System Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Backup New Configuration and Effects Files . . . . . . . . . . . . . . . . . . . . . . . . . 130
Other Kayenne Systems Software Update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Individual Kayenne System Component Update. . . . . . . . . . . . . . . . . . . . . . . . 130
Removing Kayenne Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Kayenne Menu Panel Application Removal . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Kayenne Deployment Tool Files Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Removing Using the Windows OS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Kayenne System IP Addresses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Default IP Addresses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
New Single Control Surface Kayenne Systems. . . . . . . . . . . . . . . . . . . . . . . . . . 133
Multiple Control Surfaces and Suites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

8 KAYENNE — Release Notes
Contents

KAYENNE — Release Notes 9
Version 2.0
OCTOBER 2010
Kayenne Release Notes
Introduction
This document describes installation and other information specific to
Kayenne Video Production Center Release 2.0 software. See page 114 for
Kayenne system update instructions.
Changes in Release 2.0
New in Release 2.0
• ClipStore (see page 12)
• Key Chaining (see page 52)
• Multiple Bus Linking (see page 57)
• Corner Pinning (see page 65)
• Copy Swap Menus (see page 84)
• Timeline Copy (see page 94)
• Bank Buttons on Local and Master E-MEM Modules (see page 83)
• Source OLED Enhancements (see page 83)
•Outlinemode
• Line wrapping is now supported
• Panel Saver Timer (see page 83)
• Kayenne Menu on PC can be resized (click and drag from corner)

10 KAYENNE — Release Notes
Version 2.0
Improved in Release 2.0
• eDPM Enhancements (see page 74)
• Device Control Module Enhancements (see page 77)
• Control Panel Enhancements (see page 83)
• SetDef MatchDef (see page 97)
• E-MEM Control of SetDef MatchDef (see page 100)
• E-MEM of Key Priority Transitions (see page 104)
• Key Store Enhancements and Operations (see page 104)
• Macro Attachments (see page 106)
• Satellite Panel Installation Instructions (see page 106)
Limitations in Release 2.0
This Kayenne software release does not support the following features:
• Editor Interface control of a 5th ME, Keyers 5/6, and E-MEM registers
above 100.
2.0 Upgrade Effects Existing E-MEMs: Bus Linking and eDPM
Timelines
Some E-MEM effects created using software versions earlier than Kayenne
2.0 will need to be modified as a result of the upgrade:
Bus Linking and E-MEM Effects
In earlier versions of Kayenne software, bus linking was a configuration
setting. In version 2.0, bus linking is now keyframable which provides
greater flexibility and the capability to change links dynamically during a
show. Due to this change, bus links created in older versions of software are
no longer valid in version 2.0 and should be recreated and learned into
E-MEM registers.
eDPM Effects
The following changes will effect the operation of current shows when
upgraded.

KAYENNE — Release Notes 11
Introduction
Timeline Modifications
In Kayenne 2.0, eDPM levels of Master E-MEM have their own keyframes
and no longer project the timeline from the eDPM registers. Timelines
imported from version 1.5 software are converted to have a single Key-
frame on the eDPM level of Master E-MEM, which will recall the correct
eDPM effect register that corresponds to your existing E-MEM. The fol-
lowing are the steps to modify the timeline on the eDPM level to run the
effect from the Master E-MEM:
1. Recall the E-MEM register.
2. Go to E-MEM edit mode and select the end.
3. Disable all Master E-MEM levels except eDPM.
4. Press Modify (this will add a Keyframe to the DPM level at the point of
the run cursor position).
Note The timeline just modified by the above process will be the length of the
overall run time of the selected Master E-MEM level. The actual Master
E-MEM timeline for the eDPM level only needs to be as long as the total
runtime of the eDPM effect (it can be longer, but not less). If the timeline on
the eDPM level needs to be longer than the Master E-MEM effect duration,
position the run cursor on the first keyframe of the eDPM level (disabling all
levels but eDPM) and modify the Keyframe Duration to accommodate the
maximum runtime of the eDPM effect.
Partition Modifications
The eDPM partition sub-level has moved from Master E-MEM PART to the
eDPM Primary level. Some eDPM effects will have to be modified if they
need partitions:
1. Recall the eDPM effect that has Picture Combiner or partition
information included.
2. In the eDPM mode, Picture, Combiner menu, select the correct eDPM
settings and modify the effect for eDPM Primary.

12 KAYENNE — Release Notes
Version 2.0
ClipStore (Image Store Clips)
The ClipStore is being introduced with Kayenne 2.0. By seamlessly inte-
grating the K2 Summit/Solo technology into Image Store, you can now
record and play clips with audio. The Summit provides four Video/Key
channels while the Solo provides two.
• The ClipStore is supplied to record and playback with AVC-Intra 100
compression format. Clips imported in DVCPRO HD, DVCPRO 25/50,
DV, and MPEG-2 will play natively.
• The ClipStore supports embedded audio only. The AES inputs and
outputs are not used.
The ClipStore is completely configured and controlled from the Kayenne
menu and control panel. There is no need to use the built-in AppCenter
Elite software. In fact, if changes are made to the ClipStore using App-
Center, they will be overwritten by the switcher the next time it sends a con-
figuration to the ClipStore.
This highly integrated solution provides several powerful features,
including:
• Fast access to clips and folders,
• Large storage capacity,
• Non-volatile memory—no loss of images due to power failure,
• Clip control from the Kayenne Menu Panel and clip stack control from
the Kayenne Control Panel,
• ClipStore device controls (including macros and cues) are E-MEMable,
and
• Make sub-clips from clips and build composite clips with audio.
Summit/Solo Software Version
Version 7.2.7.1403 is the current version of the AppCenter Elite software for
the ClipStore server, as of the release of this manual. The latest version of
the server software is available on the Kayenne Software Download site.
CAUTION Do not use AppCenter Elite software for ClipStore from the Summit/Solo
server website as it may not be compatible.
For more information about installing and updating AppCenter Elite soft-
ware, see the Summit/Solo manuals.

KAYENNE — Release Notes 13
ClipStore (Image Store Clips)
System Cabling
Overview
The Kayenne system uses an Ethernet connection for communications with
ClipStore (K2 Summit/Solo, Figure 1). Connect an Ethernet cable from the
Kayenne Frame to the bottom left (of the four) 100BT/1000BT Ethernet
ports on the Summit/Solo backplane.
Note For a detailed cabling description, see the K2 Summit/Solo manuals included
in the packaging.
Figure 1. Kayenne System Communications Overview
Video Cabling
The ClipStore channels on the server backplane are labeled C1-C4
(Channel 1 through Channel 4 on the Summit) from left to right (Figure 2).
The Solo backplane is not labeled, Channel 1 is on the left and Channel 2 is
on the right when facing the backplane.
ClipStore requires SDI connections for both video and key— two connec-
tions In/Out per channel (C1 in Figure 2) for recording and playback. For
8623266_39_r2
Technical
Director’s
Laptop CD-ROM
Drive
Disable Internet or
Wireless Connections
Isolate Kayenne System
from External Network
Ethernet
Serial Control
Custom Multi-Pin(Menu, 15m / 50ft max length)
Custom Multi-Pin(Panel, 15m / 50ft max length)
Maintenance Only (board front edge)
*
Internal
Control
Kayenne Video Processor
Frame Video
Processor
CPU Compact
Flash
Image
Store
CPU RAM
Only
EhternetSwitch
1
2
3
4
5
6
7
8
Panel MainLAN
Panel Aux LAN
(not used)
EhternetSwitch
1
2
3
4
5
6
7
8
Kayenne PCU
Menu
CPU Hard
Disk
Menu
CPU
(option) Hard
Disk
Panel
CPU Compact
Flash
Menu Panel
Kayenne Control Panel
Remote Aux Panel
Local Aux Stripe
ME Stripe
ME Stripe
ME Stripe
(Up to 8 Stripe Connections)
USB
RS-422/485
Facility LAN
Switch
Ethernet
Router
Remote Aux Panel
Clip Store
(Image Store Clips)
USB (2)*
Keyboard, VGA*
RS-232*
RS-422/485 (8)
GPI In/Out
Tally
Keyboard, VGA*
RS-232*
USB (2)*
USB (4)
RS-232*
USB (2)*
Keyboard, VGA*

14 KAYENNE — Release Notes
Version 2.0
playback only, two SDI connections to Out 1 and Out 2 are all that is
required per channel (C2 in Figure 2).
Figure 2. ClipStore Backplane Connections
Video/Key
In
(Record/Play)
Video/Key
OutVideo/Key
Out
(Play Only)

KAYENNE — Release Notes 15
ClipStore (Image Store Clips)
The ClipStore server (4-channel Summit/2-Channel Solo) can be connected
directly to the frame (Figure 3). It is also possible to connect to the ClipStore
directly from a router and not use any switcher outputs.
Figure 3. ClipStore Direct Connection
Odd numbered outputs are used for fill and even are used for cut. The first
output assigned to a ClipStore channel must be an odd numbered output.
Also, DAs (Distribution Amplifiers) can be used to distribute Kayenne Aux
Bus output. The example in Figure 4 shows DAs being used for both the
Video and Key Aux Bus outputs from the frame.
Channel 2
Channel 3
Channel 4
Channel 1
Kayenne
Video Processing
Frame
C1 SDI IN 2
C1 SDI IN 1
C1 SDI OUT 2
C1 SDI OUT 1
C2 SDI IN 2
C2 SDI IN 1
C2 SDI OUT 2
C2 SDI OUT 1
C3 SDI IN 2
C3 SDI IN 1
C3 SDI OUT 2
C3 SDI OUT 1
C4 SDI IN 2
C4 SDI IN 1
C4 SDI OUT 2
C4 SDI OUT 1
ClipStore
(4 Channel Summit)
8623266_94

16 KAYENNE — Release Notes
Version 2.0
Figure 4. ClipStore Connection Using Distribution Amplifiers
Basic Configuration
ClipStore basic configuration includes preparing the Summit/Solo and
Kayenne systems through licensing, IP addressing, software installation,
cabling, and Kayenne menu configurations.
Channel 2
Channel 3
Channel 4
Channel 1
Kayenne
Video
Processing
Frame
Aux Bus Out/Key to DA (even)
Aux Bus Out/Video to DA (odd)
ClipStore
(Summit)
8623266_96
Aux Bus
PairOut
DA
DA
Video/Key
ChannelsIn

KAYENNE — Release Notes 17
ClipStore (Image Store Clips)
Summit Preparation
Setting the IP Address
The ClipStore Summit/Solo server is shipped with the following defaults:
• IP Address: 192.168.0.180
• Mask: 255.255.255.0
• Gateway: 192.168.0.1
• WINS: disabled (0.0.0.0)
• DNS: disabled (0.0.0.0)
You can temporarily change the default settings using Netconfig (see the
NetConfig Network Configuration Application Instruction Manual at
www.grassvalley.com).
To set a new IP Address at the ClipStore (Summit/Solo) server, see Setting
the Summit/Solo IP Address on page 109.
The NetConfig Network Configuration Tool is installed as part of the
Kayenne software.
Note Make note of the ClipStore IP Address, it will be used later to enable Clip-
Stores as external devices later in the Kayenne configuration process.
Kayenne System Preparation
Install Kayenne Software Version 2.0 or Later
Verify that the Kayenne software is version 2.0 or later. For information
about upgrading Kayenne software, see Kayenne Software Update on
page 114.
Install the ClipStore license (Figure 5). The following are the Kayenne Clip-
Store options (see the Kayenne Installation and Service Manual for more about
licensing):
• KAYN-CLPS-2CH-PAK (2-Channel Solo Server Platform)
• KAYN-CLPS-4CH-PAK (4-Channel Summit Server Platform)

18 KAYENNE — Release Notes
Version 2.0
Figure 5. ClipStore License
Kayenne Configuration
Configuring ClipStore as a Node
ClipStore must be configured as a node in the Eng Setup, Node Settings
menu before the Kayenne system can communicate with the Summit/Solo
ClipStore server.
1. Verify there is a valid network connection.
2. Go to the Node Settings menu by touching Eng Setup, Node Settings, Frame
Suite Nodes & ID (Figure 6).
3. Input a valid IP address for the ClipStore server by touching the
ClipStore IP Address data pad, typing the address, and touching Enter
(Figure 6).
4. Touch the Enable button (Figure 6).
The Enable button allows communication between the Kayenne and
the ClipStore server and highlights green indicating a proper connec-
tion. Red will show no connection and yellow shows that some chan-
nels are connected. For both red and yellow indications, ensure that
channels are in AMP mode and available for remote control. Other
troubleshooting may be required.
ClipStore Licenses

KAYENNE — Release Notes 19
ClipStore (Image Store Clips)
Figure 6. ClipStore Node Settings
Configuring Source Definitions
To configure source definitions for ClipStore return outputs, choose a
source, a source type, an input, and in the case of a key, an Engineering
Name for the source if desired.
The following example demonstrates the configuration of a Summit with
four ClipStore channels. In this example the physical BNC connections
from the ClipStore to the Kayenne Frame are Inputs 25-32.
ClipStore can record Video only, Key only, or Video/Key clips. To do this,
both a video and a key for the video must be configured for each ClipStore
channel.
To configure a source for as a ClipStore Video input:
1. Go to the Eng Setup, Source Definition menu (Figure 7).

20 KAYENNE — Release Notes
Version 2.0
Figure 7. ClipStore Source Definition
2. From the Source List, touch a source (Figure 7).
3. Use the default video input (Video In:) or change it using the Video Input
data pad.
4. Touch the Linear Key button to select it.
5. Use the Key Input data pad (or soft knob) to select the source number of
the Key source you will use for the ClipStore channel.
6. Configure the Source Type:
a. Touch the Device mode button in the Source Type pane (Figure 8).
b. Touch the External Device data pad, the External Device List is
displayed (Figure 8).