Great Little Trading Emily Doll's High Chair User manual
1
High Chair
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
07/05/2019
V3
2
Safety Warnings:
• Adult assembly required.
• Assemble and use on a at and level surface.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage which may make the
product unsafe.
• To avoid possible injury, DO NOT allow children to climb/stand on the
product.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any structural components are missing or
damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at instructions@gltc.co.uk
Thank you
3
Component Check List
A
1x
#1
6x Bolts
35mmL
STEP 1:
#1
#1
#1
You will need
(not supplied)
Phillips Head Screwdriver
#2
#1
#1
#1
Hardware for Step 1:
2x #1 35mmL bolts
B
C
A
B C
D E F
G
D
4x Screws
33mmL
1x1x
1x 1x1x
1x
STEP 2:
When assembled correctly
parts A and C should angle
inwards towards the top.
Front view
1x Allen Key
#3
2x Screws
36mmL
please use the allen key to
secure the bolts
Hardware for Step 2:
4x #1 35mmL bolts
please use the allen key to
secure the bolts
4
STEP 3:
Hardware for Step 4:
2x #2 33mmL screws
2x #3 36mmL screws
#2
#2
F
G
#2
#2
#3
#3
E
G
D
Hardware for Step 3:
2x #2 33mmL screws
STEP 4:
Copyright© 2016 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Attach part E to part G and D,
using 2 x screws (#3).
For ease of assembly this
should be done before
assembling the seat back
(F) to the seat (D) using 2x
screws (#2).
F
Attach part G to part F using
2x screws (#2).
