Green Brook LEDFLPIR10 Installation guide

IIMMPPOORRTTAANNTT::
This product should be inst lled by
competent person nd in ccord nce with
the IEE Wiring Regul tions. If in doubt,
consult qu lified electrici n.
These instructions should be re d c refully
prior to ny inst ll tion nd ret ined fter
completion for further reference nd
m inten nce. Ple se give these instructions
to the building owner/occupier fter
inst ll tion.
Alw ys turn off the power source before
commencing work on this device.
Part numbers:
LEDFLPIR10, LEDFLPIR20, LEDFLPIR30
INSTALLATION / OPERATING
INSTRUCTIONS FOR
LED FLOODLIGHT
WITH PIR FITTING
IMPORTANT INFORMATION
INSTALLATION INSTRUCTIONS
This lumin ire is w ter resist nt to IP65 but it
is dvis ble, wherever possible, to loc te it in
sheltered loc tion. No modific tion should
be m de to the c sing to preserve the
moisture properties nd w rr nty.
This ppli nce comes with short length of
flex nd this c n not be removed or repl ced
in order to keep the w terproofing benefits.
The flex should be connected to w terproof
connector if this is likely to be in n outside
loc tion. Should the flex become d m ged it
should be repl ced with c ble of the s me
specific tion nd only by competent person.
To void he t build up it is dvis ble cle r
ir g p round the lumin ire nd the front
f ce should be t le st 500mm w y from ny
combustible surf ce. The supplied br cket
should be used t ll times for mounting.
This fitting is supplied pre-wired with 0.9M of
three core c ble (Live, Neutr l nd E rth).
This c ble c n NNOOTTbe removed. Connection
must be m de vi suit ble termin l box.
TECHNICAL INFORMATION
This ppli nce is designed to work with
m ins volt ge of 230V AC 50Hz.
It should be wired to n ppropri tely fused
nd protected source.
Lumen Output: 10W700lm
20W1400lm
30W2100lm
LED with PIR Foodlight Inst uctions:Layout 1 14/9/12 11:45 Page 1

PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
Issue No: 702984
GUARANTEE
Your KingShield LED Floodlight with PIR
is gu r nteed for 12 months from the
d te of purch se.
Ple se ret in receipt s proof of purch se.
PIR DETECTOR SPECIFICATIONS:
Volt ge: 100V-250V AC 50Hz
Detection Angle: Approx 120o
Detection Dist nce: M x. 8 meters
Dur tion Time: 10+5seconds up
to 10+2minutes
djust ble
Lux Control level: From d ylight to
night djust ble
ADJUSTING THE LUX CONTROL LEVEL
The Lux control module h s built-in
sensing device photocell th t detects
d ylight nd d rkness.
( ) position denotes th t the l mp will be
turned on by the PIR during d y nd night.
( ) position denotes th t the l mp will be
turned on by PIR only t night.
You c n set to oper te the unit t the
desired level by djusting the LUX knob.
ADJUSTING THE DURATION TIME
The dur tion time is “the length of time th t
the PIR Detector switches the lo d ‘on’ fter
ctiv tion”. The dur tion time c n be
djusted from pprox 10+5seconds up to
10+2minutes. Rot ting the TIME knob from
(+) to (-) will reduce the dur tion time.
MAINTENANCE:
Keep the gl ss front cle n with soft cloth.
There re no user service ble p rts
cont ined within fitting. Any dis ssembly or
modific tion will inv lid te the w rr nty.
DISPOSAL:
At the end of the product’s life this product
must not be disposed of in l ndfill.
Loc l recycling guid nce should be sought
for dispos l. There re no h z rdous
m teri ls cont ined therein.
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
s a l s @ g r n b r o o k . c o . u k
W W W. G R E E N B R O O K . C O . U K
LED with PIR Foodlight Inst uctions:Layout 1 14/9/12 11:45 Page 2