GREEN FROG SYSTEMS GFS-32-EXP User manual

INSTALLATION GUIDE
GFS-32-EXP
32W SOLAR EXPANSION PANEL
Version 1.1
Dec 2020

PORTRAIT ORIENTATION
Attach the tilt bracket to the solar panel frame with 6 x M6 bolts, flat
washers, and spring washers. Ensure the tilt brackets are facing
towards each other.
LANDSCAPE ORIENTATION
For landscape orientation remove outer screws connecting base
plate to solar panel frame. Feed solar wire through slot in landscape
position. Re-attach base plate to solar panel frame with outer screws.
INSTALLATION
1
1
(DEFAULT) PRE-WIRED CONFIGURATION
REQUIRES CABLE RE-LOCATION

Attach mounting arm to tilt brackets with 2 x M10 bolts, nuts, flat
washers and spring washers. Set mounting arm to desired tilt angle.
2
3Mount external solar panel to pole using 2 x U-bolts. Rotate the panel
around the pole’s axis to the desired position.
2

NOTE: If using 76 - 60mm spigot adaptor, use a 90mm U-bolt and install
the external solar panel over the adaptor.
3
4Connect the solar cable to the Solar /DC port (Defender-55) or
compatible DC power input. Ensure the plug is correctly inserted and
fully tightened.

USER GUIDE
1. Position the solar panel to an optimum angle and face the panel
as close to NORTH (southern hemisphere) / SOUTH (northern
hemisphere) as possible. NOTE: the solar panel can be adjusted 180°
to achieve optimal sun exposure.
2. — DO NOT install solar panel under the luminaire / shading or any
form of artificial light. The artificial light will trigger the solar panel
and turn off the luminaire.
3. The solar cable can be cable tied to the mounting arm and pole to
neaten the wiring.
4
TEST PROCEDURE
How do I know if my GFS-32-EXP expansion panel is working properly?
>Follow this two step procedure to ensure effective operation.
1. Completely cover the solar panel of the light fixture (leave expansion
panel uncovered) NOTE: all light must be completely blocked for
this test to be effective.
Wait one minute and ensure the light has not activated.
2. Completely cover the GFS-32-EXP expansion panel (as well as light
fixture) ensuring all light is completely blocked from reaching either
solar panel.
In around one minute the luminaire should turn ON signalling that
the GFS-32-EXP solar panel is correctly installed and working
properly.

HEAD OFFICE
AUSTRALIA / OCEANIA
[phone]
[e-mail]
USA / THE AMERICAS
[phone]
[e-mail]
GFS-32-EXP-IM-1220
Green Frog Systems – When Tough Enough Isn’t Enough