Green panther Gp-3tff User manual

Note: Please read the following instructions before use. This book contains important information on SAFETY, ASSEMBLY, OPERATION

& DISCLAIMER: DUE TO CONSTANT UPGRADATION, FEATURES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

GP-3TFF

Mini Mist Fogger

Professional Fogger

USER MANUAL

1. SAFETY PRECAUTIONS

1) Always wear protective clothing when using the machine. (mask, gloves, long sleeves and

etc.)

2) Do not use this machine in enclosed room or the places where foods or inﬂammables exist.

3) Do not spray directly to people or animals.

4) Do not use this machine in strong wind weather.

5) Be careful of burning accident by the shield of the burner.

6) Wait until the machine cools down before reﬁll of chemicals or diesel/water or change of

butane gas.

7) After work, wait until the machine cools down completely and then store it in a dry, cool place

out of reach of children.

Warning signs

Read the manual Use a mask

Wear protective clothing Use gloves

Wash after work Caution! Risk of burning

Safety warnings Caution! Risk of ﬁre

ATTENTIONS

1) This product has separated chemical tank and water/diesel tank. Do not put other materials

into water tank except water, diesel and dispersing agent.

Agricultural chemicals, pesticides and disinfectants should be put into the chemical tank.

The coil would be clogged if chemicals are mixed in the water tank according to the usual

method.

2) When mixing the chemical in the chemical tank, please read the instructions about the mixing

ratio of the chemical on the chemical container. Overuse of chemicals may cause dizziness,

headache and vomiting.

3) Chemicals must be in liquid form.

(Powder or solid chemicals are not allowed to use)

4) After work, continue to push the pump handle at least 5 times to spray out the undiluted

chemical before disassemble the water tank.

5) Please be sure of ventilation when working in conﬁned spaces.

6) Inhalation of combusted gas from the combustion section might cause dizziness, headache

and vomiting, so please keep away from the combustion section in the protection shield

during work.

7) Excess concentration of chemicals might kill plants. Proper mixture proportion must be

complied with.

8) Spray to plant or object away from about 1.5 meters.

3. PART NAMES

Nozzle

2. Chemical pipe

3. Coil

4. Protection shield

5. Chemical control knob

Pump handle

7. Chemical tank

8. Gas control knob

9. Gas container

10. Water tank

11. Burner

12. Ignition switch

4. OPERATION DIRECTIONS

WATER TANK

1) Put diesel or water or water +

dispersing agent into water tank.

Put diesel for fogging, and put water or

water + dispersing agent for misting.

2) Except diesel, water and dispersing

agent, do not put other liquids into

water tank.

Other liquids like chemicals should be

put into the chemical tank. Chemical

tank is installed in the upper case of

the machine.

3) Suggested working ways.

Outdoor Fog - water tank (diesel)

- chemical tank (diesel + chemicals)

Indoor: Mist - water tank (water)

- chemical tank (water + chemicals)

Semi-fog - water tank (water +

dispersing agent)

chemical tank (water + dispersing

agent + chemicals)

CHEMICAL TANK

1) Make sure the chemical control valve is

closed.

2) Put the mixture of chemicals and diesel

(water) into the chemical tank. Please

keep in mind that the mixing ratio of

each chemical must comply with the

instruction stated on the chemical

container.

3) Check the liquid volume according to the

marks on the chemical tank. Maximum

capacity of chemical tank is 350ml.

Please do not overﬁll.

4) Close the lid of the chemical tank.

* Overuse of chemicals may cause

dizziness, headache, nausea and

vomiting.

* Do not put water into the

chemical tank if there is an

object which is apt to rust in

work place. Recommendation:

water tank - water chemical tank

- diesel + chemicals.

IGNITION

1) Make sure the gas control valve is

closed initially.

2) Assemble the butane gas container.

3) Put the machine on an even place

where without inﬂammables.

4) Open the gas control valve by turning

the knob counterclockwise to supply

gas. Push the ignition switch to start

the machine.

* Wind may cause malfunction

of ignition, so try to ignite in a

place of no wind.

* In case, the machine could not

be activated after pushing of 5 or

6 times, turn off the gas control

valve and wait about 20 seconds

and then repeat the above

procedures.

5) After ignition, let the machine preheat

10 seconds for misting, or preheat

40~60 seconds for fogging.

SPRAYING APPLICATION

1) After preheating, open the chemical

control valve by turning the knob

counterclockwise, repeat pushing and

releasing the pump handle to start

spray (misting or fogging).

Spray to the plant or object away from

about 1-2 meters.

* When used as misting, open the

gas valve more if the particle

size is large, or close it a little if

the particle size is small.

* When used as fogging, it is

difﬁcult to check the discharged

particles with eyes, so please

check the level of liquid in the

chemical tank.

2) The discharge volume of chemical can

be controlled by turning the chemical

control knob.

3) The frequency of pumping action is 1

time in every 3-4 seconds.

If ﬁre is sprayed out, stop pumping

immediately and close the gas valve.

Put the machine on an even place and

wait the ﬁre stops.

* for your safety, be care

of keeping away from the

discharged fog or mist. Do not

spray against the wind.

* keep a distance from the shield

of the burner to avoid burning

your skin or clothes.

* After ignition of the machine,

do not leave it aside without

operation.

* If need reﬁll of chemical or

water/diesel, stop the machine

and wait until it cools down.

STOP WORK

1) Stop pumping of the handle. After the

spray stopped completely, turn off the

gas control valve (clockwise) .

2) Turn off the chemical control valve

(clockwise) completely.

3) Repeat pushing the pump handle at

least 5 times to spray out the undiluted

chemical while the coil cools down.

4) Remove the gas container from the

machine and put it in a cool place with

ventilation.

* For long term storage, wash the

water tank and chemical tank

and put clean diesel into both

tanks and assemble the machine

well. Then store it in a dry and

cool location with ventilation

and out of reach of children.

SHOULDER STRAP

Attach and use the shoulder strap to carry

the machine during work if needed.

Name Mini Mist Fogger

Model GP 3TFF

Dimension (L x W x H) 630x190x365mm

Net weight 2.0Kg

Fuel Liquid butane gas

Fuel consumption 1EA / 30min

Starting method Press the ignition switch

Ignition system Piezoelectric ceramic ignitor

Water tank

(Capacity 2.0L)

Fog Diesel

Mist Water

Semi fog Water + dispersing agent

Chemical tank

(Capacity 350cc)

Fog Diesel + chemical

Mist Water + chemical

Semi fog Water + dispersing agent +

chemical

Water/Diesel output 2 Liter / hr

Chemical output 1~1.5 Liter / hr

5.SPECIFICATION

6. ADVANTAGES OF THIS NEW TYPE FOGGING MACHINE

1) This machine has separated spray coil and chemical pipe. There is no carbonization of

chemicals and so it does not have problem of clogging in the coil.

2) It is not necessary to keep the water tank and equipment separately to prevent corrosion

of the pump, because it has separated chemical tank and water tank.

3) Chemical utilization is maximized because the chemical goes to the discharge nozzle

directly without vaporizing by heat.

4) The machine has versatile uses. Since there is no chemical change by heating, it can

spray more kinds of chemicals and as well as water.

5) The user can secure good sight of the misting by water and is safe.

1st Free Service Coupon ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Ofﬁce Seal & Signature

Service No.

Purchase bill no. Date

Serial Number

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

WARRANTY AND FREE SERVICE COUPON

2nd Free Service Coupon ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Ofﬁce Seal & Signature

Service No.

Purchase bill no. Date

Serial Number

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

WARRANTY AND FREE SERVICE COUPON

3rd Free Service Coupon ISO 9001-2015

CERTIFIED COMPANY

FREE SERVICE COUPON (30 Days / 20 hrs (Which ever is earlier)

Model

PDI Date

Dealer’s Ofﬁce Seal & Signature

Service No.

Purchase bill no. Date

Serial Number

Customer Signature.........................................

Conditions: Operations listed have been performed to my entire satisfaction without any labour charges. Only consumables were charged.

WARRANTY AND FREE SERVICE COUPON



GP-3TFF MINI MIST FOGGER

1. LIMITED WARRANTY PERIOD : For a period of six months from the date of Sale / delivery of the product which ever is earlier. 2. LIMITED

WARRANTY OBLIGATION : Replacement of defective part(s) by authorized dealer are free of charges. If found defective by reasons of defective

material / poor workmanship, parts will be replaced and there will be no value re-imbursement. 3. TERMS & CONDlTlONS : a. Claims under

warranty will be accepted on submission of Warranty Card duly ﬁlled and stamped by authorized dealer together with the original purchase

document. : b. Shipping / transportation / Incidental charges incurred in replacing defective parts under warranty shall be borne by the purchaser.

WARRANTY null & void if

(i) Lack of maintenance, (ii) Incorrect use of the machine or tampering, (iii) Use of non-genuine spare parts, (iv) Usage of acids, solvents, or any

ﬂammable materials, (v) Non-usage of ﬁlter water / clear water / soft water & using water above 40°C temperature, (vi) While using the pressure

washers to draw water which is contaminated with dust & solvents (eg. paint thinners, gasoline, oil, etc.), (vii) Repair done by unauthorized

service people, (viii) Those parts subject to wear & tear due to normal operations and plastic parts, rubber items etc, (ix) Loose connections,

faulty electrical ﬁxtures & ﬂuctuations in power supply.

4. Should any failure occur during or after the warranty period, customer does not have the right to interrupt payment / price discount.

5. Incidental or consequential damages like inconvenience commercial loss, loss of tie, mental agony etc.

6. Loss of any nature due to operation or non-operation is not covered under warranty.

7. All free service are at Dealer’s service point only.

8. Warranty ceases if service is not done periodically.

9. The attached card should be completed and returned to Ratnagiri Impex Pvt. Ltd. for registration immediately after sale / delivery.

10. The warranty is void unless you register the warranty card with Ratnagiri Impex Pvt. Ltd.

11. The decision of Ratnagiri Impex Pvt. Ltd., in settling the warranty is ﬁnal in all respects.

12. All disputes are subject to Bangalore Courts Jurisdiction