Greenlife zDisc User manual

Ozone Sterilizer
Instructions

1Included:
2Product Diagram
Ozone Sterilizer Lanyard Suction Cup
USB Charging Cable
USB Charging Port Power Button
Power Indicator
Lanyard loop

3Instruction/Modes:
Press POWER Button to turn on. The device will run for 30 mins,
then go into standby mode for 55 minutes. After standby mode
(55 mins) it will cycle on for another 5 minutes, continuing that
cycle until stopped. When in low power mode, power indicator
will be SOLID GREEN. When in standby mode, the power
indicator will be BLINKING GREEN.
Press POWER Button to turn on. The device will run for 30 mins,
then go into standby mode for 20 minutes. After standby mode
(20 mins) it will cycle on for another 30 minutes, continuing
that cycle until stopped. When in high power mode, power
indicator will be SOLID BLUE. When in standby mode, the power
indicator will be BLINKING BLUE.
NOTE: To cycle through these modes, press POWER Button
until desired mode is activated
When charging, the power indicator will be SOLID RED, and
will shut o automatically when fully charged.
Low Power mode:
(GREEN):
HIGH Power mode:
(BLUE):
Charging:
(RED)

Questions?
Call 888-601-5886
Green Life, LLC
4WARNING
Although Ozone (O3) is an inert gas, DO NOT breathe ozone directly. zDisc™ is
intended to be used in a closed container, bag, or small compartment, as a
germicidal sanitizer, NOT to be inhaled.
Produced and distributed exclusively by:
Specifications
Model No.:
Eective Area:
Battery:
Battery Life:
Function:
Box Includes:
zDisc™
Less than 2m2
500mAh, 3.7V
About 7 Days
Generates ozone, which deodorizes and sterilizes
zDisc™ Device, Owner’s Manual, USB Charging Cable
5