GREGORIUS PINEO Avedon 7046 User manual

7046, 7048, 7050 Avedon Mirror (round)
Installation Guide
Mirror arrives as pictured above:
- Wall brackets attached to wood board
- Mirror slid onto wall brackets, glass not installed

7046, 7048, 7050 Avedon Mirror (round)
Installation Guide
1) Remove mirror frame from wall brackets

7046, 7048, 7050 Avedon Mirror (round)
Installation Guide
2) Remove wall brackets from board (2 screws with nuts per wall bracket)

3A) Place wood on wall and make sure top edge is level
3B) Screw through center holes and into wall to hold
board in place while hole locations are predrilled
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide

4) Pre-drill two (2) holes per wall bracket
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide

5a) Remove center screws
5b) Remove board from wall
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide

6) Install two (2) wall brackets using pre-drilled locations
The wall brackets have countersunk holes to accommodate #12 screws.
Wall material and stud locations will dictate screw length and the need for wall anchors.
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide

7) Slide frame onto wall brackets
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide

8) Slide glass into frame
7046, 7048, 7050 Avedon Mirror (round)
Installation Guide