20220117
2 | Operating and Maintenance Instructions
GENERAL HAZARD AND SAFETY INFORMATION
Property damage and bodily injury may result from improper handling or disregarding safety information.
In the event of damages resulting from non-observance of these instructions or of the accompanying docu-
mentation, all warranty claims become null and void.
Griesser AG accepts no liability for consequential losses or damages.
SAFETY INFORMATION FOR OPERATION AND USE
Risk of injury or damage to the product from improper operation
Keep operating controls out of the reach of children.
May only be operated by trained persons.
Do not touch moving parts when deploying or retracting blinds.
Do not allow jewelry, clothing, hair or body parts to become entangled in the product.
Risk of crushing obstacles in the deployment area.
Stand clear until the end position has been reached.
Attach operating controls within view of the curtain, in accordance with national regulations.
Do not touch any interior parts that are exposed due to damage (e.g. cables/ cords, control elements).
Placing additional weight on facade awnings by attaching objects or tension cables may lead to damage
or cause facade awnings to fall from their anchoring and is therefore not permitted.
Damage to the product from icing
In winter, check products for icing before operating. In the event of icing, do not operate.
Discontinue automatic operation in winter, even if icing has not been predicted.
Risk of injury due to inadequate maintenance
Check products regularly for signs of wear.
Do not use products that require repairs.
Malfunctions may only be rectified by trained and qualified personnel.
Use only original Griesser replacement parts
No assurance is provided that the product will function with accessories, parts or operating equipment
made by other manufacturers. Modifications to the product that are not expressly approved by Griesser
render warranty or product liability claims null and void.
Risk of injury or damage to the product from unintentional operation
Disconnect products from the power supply power when maintenance work, window washing, etc. is taking
place.
Observe safety distances.
Risk of damage to the product from improper operation
When operating manually, do not use force to deploy / retract blinds.
Do not operate products beyond their mechanical limits.
Retract curtains before permitted wind load is exceeded.
Risk of injury and damage to the product from interruptions to the power supply (e.g. power outages)
Ensure that situations dangerous to people and the product do not arise
ELECTRICAL INSTALLATIONS
Electrical connections may only be carried out by certified electricians
Additional national regulations regarding the maintenance and repair of electrical systems shall be observed.
These may result in an increase in the maintenance intervals.
