Griffin Technology AP5101 Balck User manual

www.Griffin-Stands.com
www.Griffin-Stands.com
Griffin™ stands and accessories are manufactured
in several innovative factories responsible for
developing products that address the newest
needs and trends of the current market. We take
pride in the Griffin™ brand and endeavor to be on
the forefront of the musical stands and musical
and lighting accessories market.
Performance Issue, Uneven or Unstable- Make
sure all nuts and bolts are tight on the product. If they
are, then loosen all nuts and bolts 1 full turn counter-
clockwise, then go back and tighten each bolt only ½
turn tight. Then do a final tighten turn for another ½
turn tight. Next, Make sure there are not any missing
nuts or bolts. Third, ensure all parts on the product
are not broken or defective. Finally, Re-read the
assembly instructions or watch the product
demonstration video to ensure you have correctly
assembled or are using the product properly with
factory specifications.
Missing Parts- The pictures, videos and images
shown in this manual might have changed style or
count due to the product being redesigned. So in rare
cases the part may no longer be included or of a
different style. However, if you think you are missing
a part that is necessary to the assembly and use of
your product, then first carefully double check all
packaging for any parts you think are missing. Some
parts might be hiding in the packaging or loose in an
inner box.
Griffin | 11408 Hwy 64 W, Tyler, TX 75704 |
[email protected] | www.Griffin-
Stands.com
For current product specifications, please to go
www.griffin-stands.com and type the model number
into the search bar. Locate the product listing to view
the current factory specifications. Thank you for purchasing the Griffin Piano Bench.
Your product comes with a 1 year factory warranty
from purchase date. Please read all assembly
instructions prior to assembling your new cart.
Pictures that may aid in assembly can be found by
going to www.griffin-stands.com and typing AP5101
Brown/ AP5101 Black into the search bar.
User Manual
M o d e l # A P 5 1 0 1 B r o w n /
A P 5 1 0 1 B l a c k
www.Griffin-Stands.com
Piano Bench

Step 3 –The storage compartment beneath the
seat is for light weight storage only, putting heavy
items or items that will prevent closing the seat
and sitting on the bench may cause for the
bottom storage to break or may cause the bench
to be unstable. (See Figure 4)
Step 1 - Take the piano bench legs and take off
the rubber protection sleeves on the tip of the
screw bolts, once the rubber protection sleeves
are removed, wiggle the bolts coming out of the
legs. If they are loose, use a Philips head
screwdriver to tighten the screw head found at
the top of the leg (See Figure 1). Place the screw
of the legs to the bracket and make sure that it
is the correct side, as shown in Figure 2.
Step 2 –Place the washer then the nut and use
a wrench to tighten in place (see Figure 3). Also
check the top screw of the legs, make sure it is
screwed down to avoid the bench from being
wobbly as said in Step 1.
Step 4 –For safety reasons, please always make
sure to test the stability and safety of the product
before use. Double check all nuts and bolts, knobs
and connectors, make sure that these are tight
and securely fastened before use of your product.
Test the product under light use or light loads the
first time to confirm assembly and structure of the
product is correct.
Please scan the QR Code below for the product
demonstration video. Or go to the URl shown here and find
the product video. www.Griffin-Stands.com/Videos