GRIT Freedom Chair Pro User manual

Congratulations on your new GRIT: Pro! We hope the following pages will help
you get your adjustable seat back installed and adjusted correctly.
The standard User Manual will be the best resource for most setup and general-
use questions. For help installing the other components of your chair, see
Chapter 2 of that User Manual. For Riding Tips, see Chapter 3. For Maintenance
and Warranty Information, see Chapter 4.
See the following two pages for help with your GRIT: Pro seat back!
Welcome to the
GRIT Freedom Chair: Pro
The GRIT customer support team is always happy to help. Give us a call at 617-356-8106 or email
us at suppor[email protected].

1
Make sure the
clamps on the
vertical receiving
tubes (on the
seat pan) are
loosened.
GRIT: Pro seat back installation
Have a question? Give us a call at 617-356-8106 or email us at suppor[email protected].
2
Align the
canes of the
seat back
with the
receivers in
the seat pan.
4
Secure the seat
back by closing
the seat back
clamps.
3
Fully insert the
canes of the seat
back into the
receivers.

GRIT: Pro seat back adjustments
Have a question? Give us a call at 617-356-8106 or email us at suppor[email protected].
Adjustment
option #1:
Once the bolts are
loosened, you can
slide the entire
seat back forward
or backward.
The GRIT: Pro has an adjustable seat back. Here’s how to adjust it!
To adjust your GRIT:
Pro seat back, use
a 5mm Allen key to
loosen the three
bolts shown in the
photo to the right.
Then, loosen the
three identical bolts
on the other side of
the seat back.
Adjustment
option #2:
You can also shift
the bottom of the
seat back farther
forward than the
top (or vise
versa).
Adjustment
option #3:
Finally, you can
skew the right or
left side of the seat
back forward.
Note:
These bolts allow you to move the seat back up and down
the canes. If loosening these bolts, be extra careful to keep
the seat back centered on the canes!