Grizzly H6236 Installation instructions

The Model H6236 Transmission Jack (Figure 1)
features a 1000 pound weight capacity, adjust-
able platform for precision placement and steel
swivel casters for high maneuverability.
Inventory (Figure 1)
A. Jack Base ................................................... 1
B. Handle ........................................................ 1
C. Adjustable Brackets .................................... 4
D. Hardware Bag ............................................ 1
—Hex Bolts M10-1.25 x 16 ......................... 8
—Flat Washers 10mm ................................ 8
—Chain Tensioning Hook .......................... 1
—Flat Washers 6mm ................................. 2
—Wing Nuts M6-1 ...................................... 2
—Chain 4mm x 39 1/2" .............................. 1
Assembly & Operation
1. Attach the adjustable brackets to the platform
with M10-1.25 bolts and 10mm flat washers.
2. Thread a M6-1 wing nut, wings up, followed
by a 6mm flat washer to the chain tensioning
hook.
3. Locate the tab with the center hole on the
platform.
4. Slide the threads of the chain tensioning
hook through the center hole and follow with
6mm flat washer and M6-1 wing nut.
5. When the platform has been raised to meet
the workpiece, slide one end of the chain over
the hook. Wrap the chain over the workpiece
and fit the other end of the chain into the slot-
ted tab on the opposite side of the platform.
6. Use the wing nuts on the chain tension hook
to tension the chain. This will provide addi-
tional stability to the workpiece.
7. Turn the pump knob clockwise to close the
valve.
8. Insert the handle into the pump socket and
pump the handle to raise the platform.
9. Slowly turn the pump knob counterclockwise
to lower the platform.
If you need additional help with this procedure,
call our service department at: [phone].
Low Profile
Transmission Jack
MODEL H6236
Figure 1. Model H6236.
This jack is designed for the assistance of
transmission removal only. Failure to follow
these warnings will result in serious personal
injury or death:
1. DO NOT overload this jack beyond its
rated capacity. Overloading can cause the
the jack to collapse and drop the load.
2. ALWAYS support the load with an appro-
priately rated support stand before working
under the vehicle.
3. DO NOT attempt to move the vehicle while
the jack is under it.
4. Use only on hard level surfaces like con-
crete or asphalt. Other surfaces are poten-
tially unstable.
5. Center the load on the jack to maintain
proper balance.
A
B
C
D

H6236 Parts Breakdown and List
COPYRIGHT © AUGUST, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC6460 PRINTED IN CHINA
REF PART # DESCRIPTION
1 PB83M HEX BOLT M6-1 X 16
2 PH6236002 SWIVEL CASTER
3 PR10M EXT RETAINING RING 22MM
4 PW03M FLAT WASHER 6MM
5 PLW03M LOCK WASHER 6MM
6 PN01M HEX NUT M6-1
7 PB03M HEX BOLT M8-1 X 16
8 PLW04M LOCK WASHER 8MM
9 PW01M FLAT WASHER 8MM
10 PH6236010 BASE ASSEMBLY
11 PH6236011 HYDRAULIC PUMP UNIT
12 PH6236012 SHAFT
13 PH6236013 COTTER PIN 6MM X 45MM
14 PH6236014 LIFT ARM ASSEMBLY
15 PH6236015 CONNECTING ARM LONG
16 PH6236016 SHOULDER SCREW M12-1.5
17 PR07M EXT RETAINING RING 18MM
18 PH6236018 PIVOT PIN
19 PH6236019 PLATFORM
20 PH6236020 ADJUSTABLE BRACKETS
21 PW04M FLAT WASHER 10MM
22 PB70M HEX BOLT M10-1.5 X 16
23 PH6236023 CLOSE CHAIN 4MM X 1M
24 PH6236024 CHAIN TENSIONING HOOK
25 PWN01M WING NUT M6-1
26 PR06M EXT RETAINING RING 16MM
27 PH6236027 SPACER
28 PH6236028 CONNECTING ARM SHORT
29 PH6236029 KNOB BOLT M10-1.5 X 230
30 PLN05M LOCK NUT M10-1.5
31 PH6236031 SPECIAL BEARING
32 PH6236032 PIVOT PIN
33 PH6236033 KNOB BOLT M10-1.5 X 200
34 PH6236034 PIVOT PIN
35 PRP03M ROLL PIN 5 X 20
REF PART # DESCRIPTION
36 PH6236036 PIVOT PIN
37 PW06M FLAT WASHER 12MM
38 PN31M HEX NUT M12-1.5
39 PH6236039 PLATFORM TILT BRACKET
40 PH6236040 PIVOT PIN
41 PH6236041 PUMP HANDLE

















 













 




 



















