Grizzly G4787 User manual

 
&
'
'
'"&
'"'
'"(
(
)
*
+
,
-
."&
.
''
'%
&.
&-
&%
&&
&'
&'
&' &'
&(
&(
&(
&)
&*
'&
DEI>DC6AHI6C9
HDA9H:E6G6I:AN
SPECIFICATIONS
MOTOR: 1 HP, 220V, SINGLE-PHASE
MOTOR AMPS: 8A
MOTOR SPEED: 1200 RPM
SHAFT SIZE W/THREAD: 8" X 7/8"
TOTAL SHAFT LENGTH: 11-3/4"
WRENCH SIZE: 1-3/8" (2)
SPACERS: 1"(4), 1-1/2"(4), 2"(2)
WEIGHT: 78 LBS.
MODEL G4787
INDUSTRIAL BUFFING MACHINE
TO REDUCE RISK OF SERIOUS INJURY WHEN USING THIS MACHINE:
1. READ AND UNDERSTAND MANUAL BEFORE STARTING.
2. ALWAYS WEAR EYE PROTECTION AND A RESPIRATOR!
3. PLUG POWER CORD INTO GROUNDED OUTLET ONLY.
4. NEVER PLACE HANDS ON ROTATING BUFFING WHEEL.
5. DO NOT WEAR LOOSE CLOTHING, GLOVES OR JEWELRY.
SECURE LONG HAIR AND BUTTON ALL LONG SLEEVE SHIRTS.
6. DISCONNECT POWER PRIOR TO CHANGING WHEELS,
OR ADJUSTING.
7. DO NOT OPERATE UNDER INFLUENCE OF DRUGS OR ALCOHOL.
8. MAKE SURE MACHINE IS PROPERLY ADJUSTED AND SET UP
CORRECTLY BEFORE STARTING MOTOR.
9. MAKE SURE MACHINE IS SECURED TO A STABLE SURFACE
BEFORE STARTING.
10. KEEP A FIRM GRIP ON THE WORKPIECE.
11. ENSURE ANY LARGE WORKPIECE IS PROPERLY SUPPORTED
THROUGHOUT THE BUFFING OPERATION.
12. DO NOT USE WORKPIECES WITH NAILS, LOOSE KNOTS, LARGE
SPLINTERS OR ANY CONDITION THAT MAY CAUSE WHEEL TO
GRAB AND PROJECT WORKPIECE.
Manufactured for Grizzly in Taiwan
Date
Serial Number
#(
G4787 Breakdown

 
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PN36 HEX NUT 1-1/4"-7 10 P4787010 MOTOR 3HP, 220V, 3-PH
2 P4787002 COMPLETE SPACER SET 11 PB06 HEX BOLT 5/16-18 X 2
2-1 P3623002-1 SPACER 1-1/4" X 1" 12 PW07 FLAT WASHER 5/16
2-2 P3623002-2 SPACER 1-1/4" X 1-1/2" 13 PLW01 LOCK WASHER 5/16
2-3 P3623002-3 SPACER 1-1/4" X 2" 14 PN02 HEX NUT 5/16"-18
3 PS06 PHLP HD SCR 10-24 X 3/8 15 G4789 STAND (OPTIONAL)
4 P4787004 SWITCH MS-11-3PV (3HP-3PH) 16 P6209 BALL BEARING 6209ZZ
5 PB07 HEX BOLT 5/16-18 X 3/4 18 P4787018 MACHINE ID LABEL
6 P4787006 SWITCH SUPPORT 19 P3622019 SAFETY WARNING LABELS
7 PB07 HEX BOLT 5/16-18 X 3/4 20 P3622020 ELECTRICITY LABEL 0.7W X 0.6H
8 P3623008 WRENCH 1-1/2" 21 P3708021 POWER CORD 12AWG x 4C
9 PN37 HEX NUT 1-1/4"-7 LH 22 G9987 SMALL GRIZZLY NAMEPLATE
9-1 PWR2 WRENCH 2"
G4787 Parts List
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine
MUST maintain the original location and readability of the labels on the machine. If any label is
removed or becomes unreadable, REPLACE that label before using the machine again. Contact
Grizzly at [phone] or www.grizzly.com to order new labels.