Grizzly T23084 User manual


WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

MODEL T23084
5" PNEUMATIC ANGLE GRINDER
INSTRUCTION MANUAL

This manual provides critical safety instructions on the proper setup,
operation, maintenance, and service of this machine/tool. Save this
document, refer to it often, and use it to instruct other operators.
Failure to read, understand and follow the instructions in this manual
may result in fire or serious personal injury—including amputation,
electrocution, or death.
The owner of this machine/tool is solely responsible for its safe use.
This responsibility includes but is not limited to proper installation in
a safe environment, personnel training and usage authorization,
proper inspection and maintenance, manual availability and compre-
hension, application of safety devices, cutting/sanding/grinding tool
integrity, and the usage of personal protective equipment.
The manufacturer will not be held liable for injury or property damage
from negligence, improper training, machine modifications or misuse.
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to the State
of California to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement and other masonry products.
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
Work in a well ventilated area, and work with approved safety equip-
ment, such as those dust masks that are specially designed to filter
out microscopic particles.

 
Safety Instructions For Pneumatic Tools
1.READ THIS MANUAL. 
     
    


2. WEAR EYE PROTECTION.  
     

     


3. WEAR A RESPIRATOR.  
     
    



For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazardous
conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates an imminently hazardous situation which,
if not avoided, WILL result in death or serious injury.
This symbol is used to alert the user to useful
information about proper operation of the equipment.
SAFETY
NOTICE
4. WEAR HEARING PROTECTION.

    



5. MAINTAIN SAFETY GUARDS. 
     
    
      



6. KEEP CHILDREN AWAY. 
     
     



7. AVOID ENTANGLEMENTS.
    





8. USE CORRECT AIR PRESSURE.
    


9. DISCONNECT AIR PRESSURE

     
    

10. SECURE TOOLING.  

11. SHARP SURFACES.  
     

12. REMOVE ADJUSTING KEYS AND
WRENCHES AFTER USE. 
   

13. AVOID FLAMMABLES


14. SECURE WORK.    



15. MAINTAIN TOOLS WITH CARE.
    
    
   

16. DO NOT FORCE TOOL.   
       

17. CHECK FOR DAMAGED PARTS
BEFORE USING.   
     
    
     
    

18. USE GOOD LIGHTING.  
     

19. AVOID UNINTENTIONAL
OPERATION.
       

20. USE THE RECOMMENDED
ACCESSORIES.  
   
   

21. NEVER ALLOW UNTRAINED
USERS TO USE THIS TOOL WHILE
UNSUPERVISED.
22. IF YOU ARE UNSURE OF THE
INTENDED OPERATION, STOP
USING TOOL.   


23. BE AWARE OF HOSE LOCATION.



24. DO NOT USE UNDER THE
INFLUENCE OF DRUGS OR
ALCOHOL, OR WHEN TIRED.
Like all machinery there is potential danger when operating
this machine. Accidents are frequently caused by lack of
familiarity or failure to pay attention. Use this machine with
respect and caution to lessen the possibility of operator
injury. If normal safety precautions are overlooked or ignored,
serious personal injury may occur.

T23084 (Mfg Since 11/10) -3-
INTRODUCTION
No list of safety guidelines is complete,
because every work environment is
different. Always consider safety first
and use common sense. Failure to
use this tool with caution and respect
could result in serious personal
injury.
Specifications
Foreword
The specifications, details, and
photographs in this manual represent
the Model T23084 as supplied when the
manual was prepared. However, owing to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no
obligation on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: [e-mail]
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
Web Site: http://www.grizzly.com
Arbor Speed ......... Variable 0–11,000 RPM
Arbor Size ..........................................5⁄8"-11
Grinding Wheel Diameter ........................ 5"
Grinding Wheel Bore .............................. 7⁄8"
Grinding Wheel Type .............................. 27
Air Inlet ...........................................1⁄4" NPT
Average Air Consumption ............... 6 CFM
Maximum Air Pressure .................... 90 PSI
Weight ................................................4 lbs.
Inventory
Figure 1. Model T23084 Inventory.
B
A
C
D
Description Qty
A. Handle ................................................ 1
B. Angle Grinder Assembly w/Wheel ..... 1
C. Quick Disconnect Coupler ................. 1
D. Arbor Wrench ..................................... 1
E. Flange Spanner Wrench .................... 1
Assembly
Thread the handle into the housing, as
shown in Figure 1 above.
E


OPERATIONS
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
Changing Grinding Wheels
      
       
   www.grizzly.com 
     

An incorrect size or type of grinding
wheel will not work properly with
this grinder and could fly apart
and cause operator injury. Always
make sure to install only Type 27, 5"
grinding wheels with a 7⁄8" bore on
this grinder.
3.       

     
    

4. 
5.       

    

6. 

    
    

To change the grinding wheel:
1. 
2. 

Figure 2
Figure 2.





 
Using Grinder
       
      

To use the grinder:
1.      
        
     

2.     

3.      
 ON    
     
  

Note: The pressure applied to the trig-
ger varies the grinder speed.
4.     OFF  

Note: To avoid accidental start up,
disconnect the grinder from the air sup-
ply when it is not in use. Replace the
protective cap over the air inlet port to
keep dust or debris out of the internal
components.
Daily Maintenance
      

       
       
      
     
Figure 3.
These procedures should be done after
each use:
       
       

    

Quick
Connector
Quick
Coupler
Air Hose Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 3.

EYE INJURY
HAZARD!
Wear protective
equipment when
using this tool.
ACCIDENTAL START
HAZARD!
Disconnect before
service or tool
changes.
AIR PRESSURE
HAZARD!
Never exceed max
PSI rating for tool.
LUNG/EAR INJURY
HAZARD!
Wear protective
equipment when
using this tool.


PARTS
1
2
3
4
5
6
7
89
10
11
12 13
14
15
16
17
18
19
20
21
22
23 24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46 47
22
49
48
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT23084001 MAIN HOUSING 26 PT23084026 ROTOR
2 PS79M PHLP HD SCR M3-.5 X 8 27 PT23084027 ROTOR BLADE
3 PT23084003 AIR OUTLET PLATE 28 PT23084028 ROTOR CYLINDER REAR CAP
4 PS68M PHLP HD SCR M6-1 X 10 29 PT23084029 HOUSING COUPLER
5 PT23084005 HANDLE 30 PT23084030 COUPLER NUT
6 PT23084006 O-RING 12.5MM 31 PT23084031 REAR HOUSING
7 P626ZZ BALL BEARING 626ZZ 32 PT23084032 VALVE CAP BRASS
8 PR45M INT RETAINING RING 10MM 33 PT23084033 TRIGGER
9 PT23084009 O-RING 10MM 34 PT23084034 TRIGGER LOCK
10 PT23084010 BEVEL GEAR 35 PT23084035 TORSION SPRING
11 P6206ZZ BALL BEARING 6206ZZ 36 PT23084036 ROLL PIN 3 X 1.8
12 PT23084012 WOODRUFF KEY 12.6 X 3 X 4.5 37 PT23084037 ROLL PIN 4 X 2.8
13 PT23084013 ARBOR 9/16-12 38 PT23084038 VALVE STEM
14 PT23084014 HOUSING GASKET 39 PT23084039 VALVE CAP RUBBER
15 PT23084015 INNER ARBOR FLANGE 40 PT23084040 COMPRESSION SPRING
16 PT23084016 GRINDING WHEEL GUARD 41 PT23084041 O-RING 11MM
17 PLW01M LOCK WASHER 5MM 42 PT23084042 BUSHING BRASS
18 PCAP50M CAP SCREW M5-.8 X 10 43 PT23086001 AIR INLET PORT 1/4" NPT
19 PT23084019 OUTER ARBOR FLANGE 44 PT23084044 GRIP RUBBER
20 PT23084020 BEVEL GEAR 45 PT23084045 FLANGE SPANNER WRENCH
21 P6201ZZ BALL BEARING 6201ZZ 46 PT23084046 ARBOR WRENCH
22 P608ZZ BALL BEARING 608ZZ 47 PT23086037 QUICK DISCONNECT 1/4" NPT
23 PT23084023 ROTOR CYLINDER FRONT CAP 48 PT23083038 PROTECTIVE AIR INLET CAP
24 PT23084024 ROTOR CYLINDER 49 PT23084049 GRIZZLY LOGO LABEL
25 PCAP80M CAP SCREW M3-.5 X 8