Grizzly G8183 User manual

MODEL G8183
4
1⁄2" Angle Grinder Stand
INSTRUCTION SHEET
To reduce the risk of property damage
or serious personal injury when using
this grinder stand, take the following
precautions:
Never attempt to start or run a grinder
on this grinder stand without using the
grinder blade guard.
•Never use this grinder stand unless it is
fastened to a metal workbench.
•Verify that the grinder is securely
mounted before every use.
•All mounting studs must be secured
against the grinder. If any mounting
stud is loose, do not use the grinder
stand until the correct grinder can be
mounted. Otherwise the grinder could
work loose causing personal injury.
•Always unplug the grinder before
loosening and repositioning the grinder
blade guard, or when making any other
adjustments or checks.
 Never modify this grinder stand.
•Never allow children to play with or
near the grinder stand.
•Often inspect all stand bolts, framework,
the spring, and connections for
looseness, cracks, or other damage.
•Never use this grinder at a location
where grinding sparks may ignite
flammable materials.
•Always wear safety goggles, respirator,
and hearing protection when using this
grinder stand.
•Never hold a workpiece by hand when
using this grinder stand. Always secure
the workpiece with the vise.
Inventory
Box 1: (Figure 1) Qty
A.  
B.  
C.  
D.  
E.  
F.  
G.  
Figure1






Specifications
Model: G8183 Angle Grinder Stand
•

•
•
Base Assembly
1.       
Figure 2
Figure2

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.


Figure5
3. 
Figure 5
Figure6
2.       
         

Figure 3
Figure3
3. 
       
Figure 3
        
     
    Figure 4 
Step 2
4.       
         

      

5.      
      
      
Figure 6



Grinder Installation
1.       


2.       
      
Figure 5Note:The hole may
be larger in diameter than the pivot bolts
because these pivot bolts merely serve as
the pivot pins for when the grinder is adjusted
in Step 5.
Figure4






















,
'!&+
.
.
*
+
'&
)
&&
&%
&,!&+
&
&(!&)
&*
'%
(!&-
''
(
&'
')
&+
REF PART # DESCRIPTION
1 P8183001 GRINDER MOUNT ASSEMBLY
2 PSB13M CAP SCREW M8-1.25 X 30
3 PB18M HEX BOLT M6-1 X 15
4 P8183004 SPARK SHIELD
5 PB116M HEX BOLT M10-1.5 X 45
6 PN02M HEX NUT M10-1.5
7 P8183007 LEVER
9 P8183009 STUD W/RUBBER FOOT
10 P8183010 BASE
11 P8183011 LEVER
12 P8183012 WARNING LABEL
13 PB26M HEX BOLT M8-1.25 X 30
14 P8183014 T-NUT M8-1.25
15 PB04M HEX BOLT M6-1 X 10
16 PN03M HEX NUT M8-1.25
17 PSB14M CAP SCREW M8-1.25 X 20
18 PN01M HEX NUT M6-1
20 P8183020 ANGLE JAW
21 P8183021 ECCENTRIC
22 P8183022 CAM JAW
24 PB118M HEX BOLT M8-1.25 X 45
Parts Accessories
G5968—4" Angle Grinder.   
      

      


Figure7
G7397—4" Cutoff Wheel.

         


MODEL SIZE BORE GRIT
G7396   
G7397   
G7398   
G7399   
Figure8

"UY$IRECTAND3AVEWITH'RIZZLY®n4RUSTED0ROVENANDA'REAT6ALUE
/2
s3%#52%/2$%2).'
s/2$%233()00%$7)4().(/523
s%-!),2%30/.3%7)4()./.%(/52
6ISIT/UR7EBSITE4ODAY!ND$ISCOVER
7HY'RIZZLY®)S4HE)NDUSTRY,EADER
#ALL4ODAY&OR!
&2%%
&ULL#OLOR#ATALOG