Grizzly T10048 User manual
MODEL T10048
COLLET/TOOLING CART
FOR NT40
INSTRUCTIONS
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Introduction
Specifications
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
Figure 2.
Figure 1.
This cart is designed to ONLY hold metal-
working collets and tooling. DO NOT stand
or sit on any part of this cart. DO NOT use or
modify this cart for any other purpose than
what it was designed for. Failure to heed
these instructions could lead to serious per-
sonal injury or property damage.
Inventory
Figures 3–5
&
'
(
)
Figure 3.
*
+
Figure 4.
,
-
.
&%
&&
&'
&(
Figure 5.
Assembly
To assemble the cart:
1.
2.
Figure 6
Note: Make sure the middle shelf mounting
flanges on the side panels are pointing up, as
shown in Figure 6.
Figure 6.
REF PART # DESCRIPTION QTY
1 PT10048001 TOP SHELF 1
2 PT10048002 MIDDLE SHELF 1
3 PT10048003 COLLET HOLDER 48
4 PT10048004 BOTTOM SHELF 1
5 PT10048005 SIDE PANEL 2
6 PT10048006 SIDE SHELF 2
7 PT10048007 SIDE SHELF SUPPORT 4
8 PT10048008 FIXED CASTER 5" 2
9 PT10048009 SWIVEL/LOCK CASTER 5" 2
10 PT10048010 HANDLE 1
11 PB02M HEX BOLT M6-1 X 12 70
12 PLN03M LOCK NUT M6-1 70
13 PWR810 COMBO WRENCH 8/10MM 1
&
'
(
)
*
+
,
-
.
&%
&&
&'
&(
3.
Figure 7
Note: There are two possible mounting
positions for the middle shelf, as shown in
Figure 6.
4.
Figure 8
Figure 8.
5.
Figure 9
Note: Take special note of the orientation of
the shelf and supports to one another.
6.
Figure 10
Note: There are two possible mounting posi-
tions for the bottom side shelf assembly.
Figure 9.
Figure 10.
Figure 7.
7.
8.
Figure 11
Note: To better move the cart, we recom-
mend installing the swivel casters on the
same side as the handle.
9.
Figure 11.
Other Grizzly Outdoor Cart manuals
