GROM Audio GROM-MST3 PLUS User manual

OPERATION MANUAL
GROM-MST3 PLUS
MP3 USB Android car stereo adapter kit
for fiber-optic stereos
Optional Bluetooth, AUX-in and iPod/iPhone extensions
MO EL: GROM-MST3P-VOLS6
Fits to the following makes:
Volvo S40 2005-2012 6 C Stereo
Volvo V50 2006-2012 6 C Stereo
Volvo C70 2006-2012 6 C Stereo
Volvo S60 2010-2012 6 C Stereo
Volvo XC90 2007-2013 6 C Stereo
www.gromaudio.com
Copyright © GROM Audio, 2013

1. EXT1-EXT2 PORTS - Accessories Cables Connection
Connect the cables to the appropriate slots available on GROM-MST3 (see above illustration).
EXT1- connect GROM Bluetooth Dongle or AUX-In 3.5mm cable
EXT2 connect GROM compatible IPOD cable or AUX-In 3.5mm cable
Note: You can connect GROM Bluetooth Dongle only to the EXT1, and GROM compatible IPOD cable only to the EXT2. All
other cables/add-ons can be connected to either EXT1 or EXT2.
2. ifferences between Single C and 6C stereos
Volvo XC90 2007-2013 and Volvo S40/S60/V50 Single CD and 6CD stereos may look similar or exactly the same. But Six
(6) CD stereo requires different firmware flashed on the GROM main unit. If you have Single CD stereo, please update your
firmware to the correct one at http://www.gromaudio.com/software-mst3.html and refer to the usage manual for Volvo Single
CD stereos.
3. Quick operation steps
3.1 MODE Selection
1. Press Mode/CD to enter GROM mode
2. Use EJECT button to switch between 3 MODES (USB, EXT1, EXT2).
3. Quick button operation for Volvo 6 CD Stereos
1. Press < or > button to change tracks
2. On the 6-CD stereos you can create up to 6 Folders/Playlists with unlimited number of tracks on your USB memory device,
Android device, iPod or iPhone. Each playlist will be assigned to the particular Disc button on the stereo.
3. Track title, time and number, Disc number will be shown on the stereo.

4. To change Folders/Playlists use Disc buttons on the stereo.
4. USB MO E - Android Operation
4.1 Android Device Setup and Operation
The GROM-MST3P adapter when in USB mode allows you to connect your Android device directly to the GROM-MST3P
USB port. You will need the GROM AALinQ app available on the Google Play store / Android marketplace at
https://play.google.com/store/apps/details?id=com.gromaudio.aalinq . Once you have AALinQ installed on your Android
device, you can connect your Android to the USB port using your own or provided USB Android connector cable. If the
version of your Android software is 2.3 and newer, you will need to have USB Debugging enabled to allow AALinQ to
communicate between your Android and the GROM-MST3P. The USB port will also charge most Android devices (not all
supported). Note that if your Android is older than 2.3, you will need to disable USB Debugging function.
1. To enable USB Debugging, on Android device go to Settings  Applications  Development
2. Once you connect your Android device to GROM-MST3P and the GROM unit is in USB playback mode, AALinQ should
automatically start playing a song from your Android device.
3. Android and USB stick functionality is essentially identical. Playlists on AALinQ will be mapped to Discs on the stereo. Skip
tracks, change disc, fast forward, random, scan controls are identical to USB controls. Text of current song is displayed.

isc 1 will play “On The Go” playlist on the AALinQ app. isc 2 or higher are your other playlists.
The playlists are assigned to the certain Disc according to the time of playlist creation.
Troubleshooting:
Symptom Cause Remedy
No music is coming from the
car speakers or sound is
distorted
GROM-MST3P is in the wrong
mode
Make sure that you are in the USB playback mode
You can’t hear the music in
AALinQ
An empty album or playlist is
selected on the AALinQ
Make sure that you select a playlist that has songs and
it is not empty.
Music is not playing You do not have USB Debugging
enabled, and your Android is 2.3
and newer
To enable USB Debugging, on Android device go to
Settings  Applications  Development
5. USB MO E – USB stick / flash drive / external hard drive operation
5.1 Supported USB Storage Devices
All FAT16/32 formatted storages:
-USB sticks/hard drives
-Android phone with AALinQ app (most supported)
The GROM USB supports only FAT16/32 formatted storages. NTFS is not supported!
5. Supported formats
The GROM-USB supports the following formats:
- FLAC lossless
-MP3 with bitrates up to 320Kbps
-WMA with bitrates up to 389Kbps
-AAC / iTunes with bitrates up to 389Kbps

-OGG/Vorbis with bitrates up to 389Kbps
-VBR/CBR
Note 1: No digital rights management (DRM)-protected content purchased through major
online stores will play directly through the GROM-MST3P-VOLSO adapter as such content is encrypted and signed by the
media publisher. This includes but is not limited to iTunes, Rhapsody, Zune Marketplace, and MSN. You need to burn such
files to a CD and then rip them back with any capable software.
The music purchased from Amazon and iTunes+ is compatible with GROM-USB2 without any modifications.
Note 2: AAC files stored on USB Flash Drives may have a delay of 5-10 seconds before the music starts playing.
5.3 USB Directories/Folders Setup
- You must set up the PLAYLISTS (FOLDERS/DIRECTORIES) on your USB device. You will need to set up at least one
playlist. Without playlists the USB interface will not play the music.
- Create one directory (folder) for each disc your stereo supports. For Volvo with Single CD you can create up to 59
folders/playlists, and there is no limit for the number of the tracks in each folder.
- Name them with numbers (i.e., 1-Pop, 2-Rock, 3-Classic, etc); save all of your music into these directories.
- As soon as you connect the GROM-MST3P adapter to a USB portable data medium, GROM will translate root directories
into virtual discs.
- We recommend that you have as many directories as possible on a root level as the car stereo will not recognize
subdirectories. The GROM itself will enumerate subdirectories and turn them into a flat list of tracks.
- If filenames in a certain directory begin with digits, they will be played in ascending order based on the order of those digits
in the filenames. For example:
\1-Dance\My songs\
1. Track.mp3
2. Track.mp3 (will play first according to the number )
- If filenames begin with letters, they are played in ascending order of the file creation date/time.
- If root directory starts with the number, the directory will be assigned to a respective virtual disc.
All MP3, WMA, iTunes, FLAC and OGG tracks will be enumerated and found once you select the appropriate disc.
Check USB Drive Setup guide at http://gromaudio.com/docs/Grom_USB_Setup.pdf

5.4 USB Basic Features
The GROM-MST3P adapter has the following functionality:
-Every directory in a root of the USB portable data medium becomes a virtual disc. Playlist on Android become virtual
disc. Please note: directories with non-audio files (e.g., pictures, documents) located in the root will be recognized
as empty virtual discs.
-All audio files within the root directory are enumerated and treated as TRACKS.
-The following operations are supported by the GROM-MST3P:
oChange virtual disc/playlist
oChange tracks forward and backward
oDisplay track # and track title where available
oRestore last positions for up to 4 USB sticks
oRestore last playlist positions in up to 20 virtual discs
6. iPod/iPhone operation with optional (sold separately) GROM compatible iPod cable
Once in the EXT2 or IPOD Mode of your GROM the following operations of the iPod/IiPhone are available:
A. Simple mode (iPod stays unlocked) :
1. Six (6) CD stereo: push Disc № 1 button on the stereo, the GROM will operate in Simple iPod Mode.
iPod stays unlocked. Your iPod can be controlled via its clickwheel or via car stereo controls. The information displayed on
your car stereo does not represent the actual song position on the iPod (the song’s number). There is no need to prepare
your iPod to play in this mode.
2. Available operations:
- Next track use > button or turn Tuning knob to the right
- Previous track use < button or turn Tuning knob to the left
- Fast Forward press and hold > button
- Fast Reverse press and hold < button
B. Advanced mode:
1. Six (6) CD stereo: Press Disc 2 button, GROM will enter into Advanced iPod Mode Folder/Playlist 1
Your iPod is locked for control and only operated via car stereo buttons. You can see current information such as track time,
number and playlist (disk) number. Text is also available for certain stereos. In order to use this mode you have to prepare
your iPod as explained later.
The advanced mode is always on for playlists 2 and up.
2. “Ok to disconnect” is shown on the iPod display while it is connected to this unit. The clickwheel of the
iPod is disabled when in this mode.
3. Available operations:
- Next track
- Previous track
- Next Playlist/Folder
- Previous Playlist/Folder
4. Playlist set up for Advanced Mode
To use your iPod in Advanced Mode you have to define playlists. We recommend naming the playlists starting with the
number according to the desirable disk position.
1. Andy’s songs
2. Kids
3. Disco dance
4. Favorites
5. House rhythms and so on.
If your iPod does not have playlists/songs it may cause unpredictable outcomes and improper operation of the unit.
EMPTY PLAYLISTS MAY ALSO CAUSE UNPRE ICTABLE BEHAVIOURS, ESPECIALLY EMPTY PLAYLISTS THAT
ARE LOCATE IN THE MI LE OF ALL OTHER PLAYLISTS.

Note for iPhone users: Once connected to the GROM adapter, your iPhone will register a message stating “This accessory
is not made to work with iPhone.” It will ask if you want to “Turn ON the Airplane Mode.” Please answer “NO”. If the stereo
still does not recognize the iPhone, please restart the iPhone.
iPod/ iPhone with “Lightning style” connector are compatible with the GROM car kits. To use the GROM-MST3P kit
with such iPhone or iPod you will need to get the 30-pin to Lightning style converter adapter from Apple®.
Note for iPhone with iOS4 and up: Once connected to the GROM adapter, your iPhone will register a message stating
“This accessory is not optimized for this iPhone. You may experience noise caused by cellular interference and a decrease in
the cellular signal strength ”. Please hit “Dismiss”. If the stereo still does not recognize the iPhone, please restart the
iPhone.
C. WHEN THE CAR IGNITION IS OFF
When you turn your car stereo or car ignition off, the iPod will automatically will go into sleep mode. In the sleep mode, the
iPod will still consume power—although very little—from the car battery. There is no need to disconnect the iPod every time
you turn off your car.
However, it is strongly advised that you disconnect the iPod if you do not plan to operate your car for one week or
more.
7. USB and iPod MO E Operation Troubleshooting
Symptom Cause Remedy
No music is coming from the
speaker
GROM-MST3P is in the wrong
mode
Make sure that the correct mode (USB, iPod or AUX) is
selected. Please refer to the chapters 2-3 of this
manual.
The music is distorted. GROM-MST3P is in the wrong
mode
Make sure that the correct mode (USB, iPod or AUX) is
selected. Please refer to the chapters 2-3 of this
manual.
You can hear the music from
the iPod but you can’t control it
from the stereo
iPod needs to be reset Reset the iPod (resetting will not erase your music, it
will only restart the iPod)
You can’t hear the music from
USB or iPod
An empty album or playlist is
selected on the USB or iPod
Make sure that the non-empty album or playlist is
selected on the USB or iPod
The music is distorted EQ or BASS boost options are
turned ON on the iPod
Make sure all EQ and BASS boost options are turned
OFF on your iPod
The music is distorted You have more then one device
(USB or AUX) connected at the
same time
Please make sure that you connected only one device
to GROM interface (USB, iPod or AUX). Disconnect all
other devices if present.
The player is skipping the
playlists on USB
You have empty playlists Make sure there is no empty playlists on the USB drive
8. Bluetooth and AUX-IN
Note: Bluetooth Dongle and AUX cable are sold separately.
In the AUX mode you can connect any audio source via GROM MiniDin to 3.5mm phone jack cable.

8.1 AUX-IN input
You can connect any audio source via GROM MiniDin to 3.5mm phone jack cable (please refer to the section 1.8 of Install
Manual, “optional accessories”). The GROM 3.5mm cable connects to the EXT1 or EXT2 port on the GROM-MST3P adapter
and provides AUX-IN for any audio device. The charging USB connector on the GROM auxiliary cable (if available) provides
5V USB charging for most mobile devices.
To start using GROM as the auxiliary adapter, simply connect your audio source to the 3.5mm phone jack and then turn the
audio source ON.
A. You are using EXT1 for GROM AUX cable. Your stereo should be in the AUX GROM mode. Please refer to the Chapter
3.1 of this manual on the MODE changes.
B. You are using EXT2 for GROM AUX cable. Your stereo should be in the iPod GROM mode. Please refer to the Chapter
3.1 of this manual on the MODE changes.
If the stereo is ON and in the CORRECT MODE the device will be ready to play. You can control the connected device
using its own controls. Please regulate and adjust the volume on the connected device for proper audio levels.
You can connect MP3/DVD player, Satellite and many other audio devices that have 3.5 mm plug. If your device has a
different type of connector (RCA, 2.5mm, etc.) you can buy an extension adapter at your local stereo store or on GROM
website.
Note: When the ignition is OFF the adapter will not automatically shut down the AUX-IN device. Please make sure to turn off
the AUX-IN audio source manually. If you plan not to operate your car for one week and more, please disconnect AUX-IN
audio source from the adapter. When you are using GROM-USB in a different mode other than AUX, please turn off AUX-IN
audio source.
8. BLUETOOTH Dongle
You can also connect GROM Bluetooth Dongle (GROM-BTD) to the EXT1 port on the GROM-MST3P adapter for the hands
free use of your mobile phone and wireless music play. Please refer to the GROM Bluetooth Dongle manual that is supplied
with your Bluetooth Dongle. You can also access the manual online at GROM Audio website:
http://gromaudio.com/docs/bluetooth_manual.pdf.
If for some reason you need to reset the Bluetooth:
A. For Volvo S40/S60/V50 Six (6) C with SCAN button available:
To reset GROM-BTD memory, go to FM, then go to CD and press the SCAN function of the stereo 1-2 times. Should hear 2
low beeps from the speakers indicating reset. If your phone was connected to grom-car, when you do the reset it will
disconnect from Bluetooth. If you have an old grom-car on the Bluetooth menu of your phone delete it, a new grom-car will
pop up after the reset.
B. If the SCAN button is not available, by MYKEY button is available:
It is easiest to save the SCAN function to your MYKEY button.
In CD mode, go the scan function in your stereo, press and hold MYKEY for a few seconds. Screen should say the function
has been saved to mykey.
Then you can go to FM, then back to C , then press MYKEY 1-2 times for the reset.
9. Support and Warranty
For technical support, please visit http://gromaudio.com/support.html and fill in the web form. The first available
representative will answer your question.
For warranty information please refer to your Installation Manual.