Gruenluft VK-8601 User manual

Xiamen Voke Health Technology Co.,Ltd.
User Manual
VK-8601Quick heating water dispenser

Contents
Contents
Note
Product fertuers
Structure and name
Display panel content
Display panel operation
Operating procedure
Cleaning and maintenance
Technical parameters
Trouble phenomenon and exclusion method
1
2
3
4
5
5
6
6
7
7
1

Note
When using this product for the first time, please read
the instruction carefully.
The company does not assume legal responsibility for
damage or other accidents.
1. This series product is to be placed flat table indoors, and keep
no foreign body at the bottom of the machine
2. When use, must add water firstly, when there is water in the
tank, then machine can be connected to the electricity power for
heating, it is strictly prohibited to anhydrous dry
3. In the process of adding water, please pay attention to the
water tank and the original water tank capacity, to avoid the
water overflowing; if there is an water overflow situation, please
immediately stop adding water and cut off the power supply;
Open the drain plug at the bottom of the machine, remove
internal water machine, packed drain plug again. If the machine
inlet of water is serious, then it needs to be sent to maintenance
department to check. If water inlet is slight to the machine, the
machine can be placed in ventilated place for 2 hours, until the
water dry out from the machine.
4. The machine is strictly prohibited by children's operation, in
order to avoid hot water scald.
5. The product should be away from high temperature, and
should be placed in a cool, dry, ventilated environment, is
prohibited to be placed in a direct sunlight, or there may be
water splash in the outdoor use.
6. If the machine will not be used for a long time, please cut off
power supply, unscrew the drain plug at the bottom, pour out the
remaining water; remember that after water pouring, must install
back the drain plug.
7. If use this product for the first time or after a long period of
time, should clean up the water tank and the pipeline. The
screen shows the life of the filter element is due or need to be
replaced every 2-3 month, the power cord should be pulled out
firstly during the drainage.

8. It is forbidden to pull the power cord or plug in the power cord
to start or stop machine; if the power cord is damaged, it must be
replaced from its manufacturing plant or maintenance
department's special components to replace.
9. Prohibit the use of gasoline and other organic solvents to
clean the body or water leaching shell, should be cleaned by wet
cloth.
10. If people is out of leaving, please cut off the power, not only
save electricity but also prevent accidents.
11. In plateau area, because the boiling point of water is
relatively low, the hot water temperature may not reach the
temperature value described in this manual, which is a normal
phenomenon (should use specify plateau model machine in
plateau area).
14. If this product shell is seriously damaged, water leakage,
power cord damage and other potential impact on the normal
use of the existence of safety problems, please stop using this
product immediately, should send the product to the repair
center for testing and maintenance.
Product features
1. This series product adopts unique thick film fast electric
heating system, reasonable compact structure, small volume,
power appropriate; a unique, delicate, luxurious and elegant
appearance
2. This series product overcome the phenomenon of repeated
heating and prolong the service life, avoiding the loss of water
nutrients, making out the fresh and tasty water.
3. The series of products is easy to use, press the handle, it will
automatically out of hot water in 3 seconds, namely a ready-to-
drink, can quantitatively the hot water, and use continuously.
4. This series product system heating capability is strong, out of
hot water continuously, the rate of more than 90℃ hot water can
be 16L/h.
5. This series of products are suitable for general family use, not
suitable for other commercial use.
6. This series of energy-saving products, safe and reliable, long
service life.

7. This series of products is set five hot water temperatures to
meet the needs of different users.
8. This series of products are safe and reliable, with three
safety protection device: temperature control, heat protection,
microcomputer control water shortage protection.
9. This series of products using a unique water system, the use
of materials for food grade silicone tube, stainless steel tube,
and effectively reduce the "two pollution" phenomenon.
10. This system is made of the outer shell of the product. The
product is made of excellent quality and material, and the
thickness is 2-3mm, which has the advantages of no poison,
sanitation, rigidity, aging and long life.
Structure and name
11
2
3
4
5
6
12
11
10
9
8
7
1. Display 2. Heating handle
3. Water faucet 4. Decorative shell
5. Water box cover 6. Water box
7. Power cord 8. Support base
9. Purified water tank 10. Sliding fastener
11. Original water tank 12. Tank cover

Display panel content
1
2
3
4
5
1. Temperature control tips
2. Reset button
3. Switch button
4. Child lock button
5. Display
Panel operation display
1. Switch button: turn on and off. Connect the power, press the
button" " , then machine will turn on, at this time the screen
displays “NL”,means under normal temperature water; again
press the button" ", then machine will turn off.
2. Temperature key: can be adjusted to choose 5 different water
temperatures.
3. Lock button: unlock, open and shield. Child lock is opened by
default. When you need to open the child lock function, you can
press the child lock key for 3 seconds to open child lock
function; if you do not need child lock function, can be long
press child lock button for 3 seconds to close child lock function.
4. Reset button: filter life restoration; long press the reset button
for 3 seconds to reset filter life.
5. Handle: open and close the outing of water. Press once again
to open the outlet, press the again to close.

Operating procedure
1. For the first use of this product, Please clean the special filter
until no black particles flow; then assemble the filter to the
original water tank, adding water in the original water tank
b e f o r e o p e n i n g t h e p o w e r s u p p l y f o r h e a t i n g .
2. Plug in the power cord, turn on the power switch. When there
is certain amount of water in the water tank, adjust the needed
temperature, press the heating handle, then out of hot water.
3. This pro duct ca n b e set up fi ve gea rs hot wa ter
temperature;“NL”: normal temperature water; “50”: 50 degrees
warm water; “60”: 60 degrees warm water, suitable for milk
powder; “85”: 85degrees hot water, it is suitable for made coffee
and other beverages; “90” file: 90 degrees hot water, and is
s u i t a b l e f o r m a k i n g t e a o r i n s t a n t n o o d l e s , e t c .
4. The cup of final hot water can make tea, drink directly etc
Cleaning and maintenance
1. For the first time to use this product or long-term disabled
after the first use, please wash the basin and pipeline with “NL”
temperature water, then pour out 1 to 2 liters of water.
2. If you need to use this product for a long time, please adjust
the temperature “NL”, drain the water in the water tank from the
outlet, then take off the body base drainage plug, drain the water
body. Note: keep the body upright when draining, then install
drainage plug and cover.
3. For the first time to use or replace the new filter element, the
filter element should be by washed by the water until no black
particles flow out.
4. The original water tank and the filter parts can be took out into
the water for cleaning.
5. In the cleaning machine, please cut off the power supply, use
the clean cloth for cleaning.

Trouble phenomenon Possible reasons Exclusion method
Unable to turn on the
power switch
1. Power is not connected
2. Internal cable is not connected.
1. Check the socket to be plugged in
2. Internal line by connected in right way
Cannot out of water
1. Child lock protection
2. Water tank water shortage
3. Micro switch fault
1. Unlock
2. Adding water.
3. Replacement of micro switch
Cannot out of hot water
1. The heating temperature
control protection tripping
2. The heating body heat burn out
insurance
3. The heating body line not
connected well
1. Reset heating temperature control
protection
2 Replace the heating body
3. Connect the heating body line.
Reset lighting Filter life due Replace the new filter element, press the
reset switch for 3 seconds.
Appears E1 on screen Inlet temperature probe Detection of water temperature probe that
is connected well
Appears E2 on screen Inlet temperature probe Replace inlet temperature probe
Appears E3 on screen Outlet temperature probe Detection of water temperature probe that
is connected well
Appears E4 on screen Outlet temperature probe Replace out let temperature probe
Appears E5 on screen Over temperature protection Raw water temperature of more than 50 ℃
Model VK-8601
Power Supply 220V 50HZ
Rated total power 2000W
Rated heating power 2000W
Power consumption 0.1KWH/24H
Hot water capacity ≥90℃ 16L/H
Total volume water purification 200L
Rated net water flow 0.3L/MIN
Electric shock resistance Class I
Using ambient temperature 4~38℃