Grundig GDR600DAB User manual

Introduction
Thank you for buying a GRUNDIG Digital Rado. The following
instructions will assist you in operating all the features of this great
product.
You may already be familiar with using a similar unit, but please
take the time to read the instructions relevant for your model.
Your safety is very important. Please ensure you read the "Safety
Instructions" before you operate this unit.
This Grundig Digital Radio has been designed to give you many
years of trouble-free service. In the unlikely event that your
product fails to work normally, please call one of our qualified
service engineers on the below free warranty line - 1800 509 394.
12

SCAN
INFO
SELEC T
PRESE T
1234
5
678 9 10 11
12
13
MODE
5.
4. Display LED
3/10.
+/-
2/8. /
1. SELECT Button
Button
Up and Down Buttons
Volume Buttons
Press the SELECT Button to
confirm selection.
Press the Up and Down Arrow
Buttons to scroll through the
station lists or menu options.
Press the +/- Volume Buttons to
adjust the volume level.
The LED Display allows you to
view DAB+ Scrolling Text information
as well as the main radio text
information.
Press the Standby Button to turn the
radio on or off.
7.MODE Button
9.SCAN Button
11.PRESET Button
12.
13.ANTENNA
6. INFO Button
Press the Info Button to scroll through the
DAB+ Station information.
Press the Mode Button to switch
between DAB+ and FM mode.
Press the Scan Button to conduct
a full DAB+ station search and store.
Press the Preset Button to store or
playback a saved favourite DAB+ or
FM station for quick access.
You can connect your headphone to
this unit for personal listening .
The 360 Degree Telescopic Antenna
will provide you with the best possible
radio reception. Make sure you extend
for the best possible service.
/Output

DC 5V I N
INFO
MODE SCA N
SELECT
PRESET
INFO
PRESET
MODE SCAN
SELECT
Connect the Power Adaptor provided
to the unit and then connect to your wall
outlet and turn on the Power.
the
all
Initial Station Scan

INFO
PRESET
INFO
PRESET
DC 5V I N
MODE SCA N
SELECT
MODE SCAN
SELECT
Connecting Headphones
Connect your Headphones to the
3.5mm Headphone socket on the side
of the unit as shown.
Adjust the volume level by pressing the Vol+
Button to increase the volume or decrease the
volume by pressing the Vol - Button.
Changing the Volume

Playing your DAB+ Radio
1. Press the Mode Button to Select the DAB+ Radio mode.
Press and hold the Info Button to Select the Main Menu. Press the and Buttons to scroll
through the below options:
1. In the Main Menu, use the Navigation Buttons to select the Auto Scan Menu
2. Press the SELECT Button to confirm and the unit will perform a full scan and store all
available stations
You can save up to 10 DAB+ Station Presets for quick access.
4. To scan for all new stations or to rescan for weak stations, press the Scan Button and
the radio will scan and store all available stations. We recommend scanning for new
stations every so often to pick up any newly launch digital radio stations.

1. In the Main Menu, use the Navigation Buttons to select the Manual Tune Menu
2. Press the Select Button to confirm
3. Use the Navigation Buttons to scroll through the available frequencies
4. Press the SELECT Button to confirm and play
Manual Tune
Info
Info
Radio Info
Prune
If your station list includes stations that you can no longer receive , you can select the
‘Prune’ option to remove any stations that can no longer be received from the Station List.

Auto Tune
automatically search for the next available frequency.
hold the Info Button
Once in the Main Menu, press the Navigation Buttons to scroll through and select
'Scan Setting'.
1. Once in the Main Menu, press the Navigation Buttons to scroll through and select
'Audio Setting'.
M

2
3
4
SYSTEM SETTING
[Factory reset] Resets all the settings of this radio player to factory default.
[SW version] Software version of the radio player is shown.
1. Press and hold the Info Button to access the Main Menu.
2. Press the and Buttons until "System Setting" is displayed.
3. Push the SELECT Button to confirm. The following options will be displayed.
7.
8
Info
Info
Setting Alarm 1 or Alarm 2 is simple, when you follow the below steps:
We
recommend conducting a factory reset if you experience any issues with the unit function.
This will allow you to see the
Software Version of your radio.
Press and hold the Info Button to the Main Menu.Select
Buttons
Buttons
Buttons
SELECT Button
To turn off the alarm you will need to the Alarm Menu and change the ON setting
to OFF.
Select
press the and Buttons to select Alarm off.
To silence the alarm, Press the Power Button.
This option will display the version number of the
control software currently installed in your radio. This will be helpful to a
technician who is servicing the radio.
6.Next select the Alarm source (Buzzer, DAB+ or FM) by using the Up and Down Buttons
and pressing the Select Button to confirm. The source option is last step in setting the alarm
and it will now be saved with an Alarm Icon displayed on the LED display
press the and Buttons to adjust the Hours and the Minutes
push and hold the info to confirm.
5.Now you will select the Alarm volume. Press the Up and Down Buttons to adjust the
volume as desired. Press the Select Button to confirm.
ALARM OPERATION BUTTON
in Standby mode.

Grundig
1 year

www.grundig.net.au