Grundig Music 51 DAB+ User manual

PORTABLE RADIO
Music 51 DAB+
frde en esit pt
da
nl pl tr
sv fi

2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
ON/OFF
SLEEP
-TUNING+ SELECT/İ
MENU
AC ~
AL/ATS
+ VOLUME - TONE
0
BUZZER/
RADIO
S+5 PRESETS 1,2,3,4,5

ENGLISH
16
7
This device is designed for the playback of
audio signals.
7
Any other use is expressly prohibited.
7
Make sure the device is protected from dripping
or splashing water.
7
Do not place any vessels such as vases on
the device. These may be knocked over and
spill fluid on the electrical components, thus
presenting a safety risk.
7
Do not place any naked flames such as candles
on the device.
7
Ensure that the device is adequately ventilated
by placing it at least 10 cm from any
other object. Do not cover the device with
newspapers, table cloths, curtains, etc.
7
Only use the device in a moderate climate.
7
If malfunctions occur due to static electricity
charges or fast transient (burst), reset the
device. To do this, pull out the power plug and
connect it again after a few seconds.
7
When deciding where to place the device,
please note that furniture surfaces are covered
by various types of varnish and plastic, most
of which contain chemical additives. These
additives can corrode the device supports,
leaving residues on the furniture surfaces which
can be difficult or impossible to remove.
7
Do not use any cleaning agent, as this may
damage the casing. Clean the device with a
clean, dry cloth.
7
Never open the device casing. The
manufacturer will not accept any liability for
damage resulting from improper handling.
SET-UP AND SAFETY
-------------------------------------------------------------------------------------------------

17
ENGLISH
OVERVIEW
---------------------------------------------------------------------------------------------------------------------------------
See the figure on page 2.
Controls on the top
ON/OFF Switches the device on and
off.
– Telescopic antenna.
PRESETS
1,2,3,4,5 Preset buttons for storing
and selecting radio stations.
+ 5 Activates the second level of
preset buttons 1 to 5.
S Interrupts the alarm function
(Snooze).
SLEEP Sets the sleep timer
Controls on the front
– TUNING + In DAB mode: select DAB
radio stations from the
program list.
In FM mode: tunes FM radio
stations.
Select menu options.
In the „System“ menu: for
setting the time and the
alarm time.
SELECT/i Confirms settings.
MENU Opens the menu.
AL/ATS In standby mode: activates
the alarm function;
ends alarm stand-by.
In DAB mode: press and hold
down, starts the auto tuning
for DAB radio stations.
Controls on the sides
+VOLUME – Adjusts the volume.
BUZZER/RADIO Switches between signal
sound and radio program
for alarm mode.
TONE Adjusts the tone
0Earphone socket (3.5 mm
stereo plug).
Mono playback via
earphones.
Caution:
7
Excessive sound pressure from the earphones
can cause hearing loss.
Controls on the back and on the
bottom
AC ~Connection socket for power
cable supplied.
▬ Handle.
Battery compartment cover.
USB USB socket for upgrading
the software of the device.
P •• P
xDisables and enables the
buttons.

ENGLISH
18
Mains operation
Check that the mains voltage on the type plate
(on the bottom of the device) corresponds to your
local mains supply. If this is not the case, contact
your specialist dealer.
1Plug the mains cable supplied into the »AC ~«
socket on the device.
2Plug the mains cable into the socket (230V~,
50/60 Hz).
Note:
7
If there are batteries in the device, these
are switched off automatically during mains
operation.
Caution:
7
The device is connected to the mains with
the power cable. Pull out the power cable
when you want to completely disconnect the
device from the mains.
7
Unplug the mains plug to disconnect the
device from the mains. Make sure the power
plug is easily accessible during operation
and not hindered by other objects.
POWER SUPPLY
---------------------------------------------------------------------------------------------------------------
Battery operation
You can also operate the device using standard
batteries (not supplied). In this case, you must
disconnect the mains power cable.
1Open the battery compartment by pressing the
area marked with arrows on the drawing and
pushing down the cover.
2Insert four batteries (4 x 1.5V, Type IEC, AM
2, LR 14, C size) according to the polarity
marked on the battery compartment.
3Close the battery compartment.
Notes:
7
Do not expose the batteries to extreme
heat, caused for example by direct sunlight,
heaters or fire.
7
Remove the batteries when they are flat or
when you know that the device will not be
used for a long period of time. When the
batteries are low, a battery symbol appears
and flashes in the display. This function does
not work when the power cable is plugged
into the device.
7
No liability is accepted for damage resulting
from leaking batteries.
Environmental note:
7
Batteries, including those which contain
no heavy metal, must not be disposed of
with household waste. Please dispose of
used batteries in an environmentally sound
manner. Observe the legal regulations
which apply in your area.

19
ENGLISH
Tuning and storing radio stations
(DAB and FM) – first installation
When the device is switched on for the first time
or after factory reset, the Auto Tuning System will
start to scan the whole DAB bandwidth and store
in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1Press »ON/OFF« to switch on the device.
– Display: »WELCOME« and then »SCAN«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning and storing DAB radio
stations – after a removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1Press »ON/OFF« to switch on the device.
– Display: the name of the radio station, e.g.
»B5 AKT«.
2Start the automatic station search by pressing
and holding down »AL/ATS«.
– Display: »SCAN«.
– The automatic station search starts, searches
and stores the radio stations.
Note:
7
You can also activate the automatic scan
from the menu.
Open the menu with »MENU« and press
»SELECT/i« to confirm.
Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
Select the option »ATS« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i« (display: »N«).
Select »Y« by pressing »– TUNING +«
and start the automatic station search by
pressing SELECT/i«.
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Storing DAB radio stations to
presets
After the automatic station search, all radio
stations will be stored in the program list. You can
store your favored radio stations on presets 1 to
10.
1Select DAB radio stations by pressing
»– TUNING +«.
– Display: the name of the radio station, the
radio station will be activated in 1 second.
2For storing the DAB radio station on a preset,
press and hold down the required preset
button »1« to »5«, until »STORED« appears.
Note:
7
Press »+5« and the required preset button
»1« to »5« for presets 6 to 10.
Programming DAB radio stations
– manually
1Open the menu with »MENU«.
– Display: »MANUAL«.
2Press »SELECT/i«.
– Display: e.g. »I74.9 SA« (frequency and
channel of a DAB radio station).
3Select the desired frequency/channel by
pressing »– TUNING« or »TUNING +«.
4Press »SELECT/i« to confirm the frequency/
channel.
– Display: the signal strength, the DAB radio
stations will be stored in the program list.
5Press »MENU« to end the setting.

ENGLISH
20
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Programming FM radio stations –
manually
1Open the menu with »MENU«.
2Confirm the option »TO FM« by pressing
»SELECT/i«.
– Display: »FM«, then the name or the frequency
of the FM radio station.
3Press and hold down »– TUNING« or
»TUNING +« to search the desired radio
station.
– The automatic station search starts, and stops
at the next station with a strong signal;
or
briefly pressing »– TUNING« or »TUNING +«
until you have found the frequency you want.
– The frequency changes in steps of 50 kHz.
4To store the DAB radio station on a preset,
press and hold down the required preset
button »1« to »5«, until »STORED« appears.
Press »+5« and the required preset button »1«
to »5« for presets 6 to 10.
Note:
7
The device normally scans for FM radio
stations which are strong enough to get
good reception. To scan radio stations with
weak signal:
Open the menu with »MENU« and confirm
with »SELECT/i«.
Select the option »DX« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
Setting the clock format
(12 or 24 hours)
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »12/24 HR«.
5Press »SELECT/i« again and select the desired
clock format (12 or 24 hours) by pressing
»– TUNING +«.
6Press »SELECT/i« to confirm setting.
7Press »MENU« to end the setting.
Updating the time – automatically
The device will normally update the time
automatically, when a time signal is received.
You can select from which source (DAB or FM)
the update starts or you can disable this function.
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »12/24 HR«.
5Select the option »UPDATE« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »ANY«.
6Select the desired option (Any, DAB or FM) by
pressing »– TUNING +«;or select the option
»NONE«, if you want to disable the update.
7Press »SELECT/i« to confirm setting.
8Press »MENU« to end the setting.

21
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Updating the time – manually
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »12/24 HR«.
5Select the option »SET TIME« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: e.g. »I : I6 PM«.
6Set the hours by pressing »– TUNING +« and
confirm by pressing »SELECT/i«.
7Set the minutes by pressing »– TUNING +«
and confirm by pressing »SELECT/i«.
8Set the clock format (12 or 24 hours) by
pressing »– TUNING +« and confirm by
pressing »SELECT/i«.
9Set the day by pressing »– TUNING +« and
confirm by pressing »SELECT/i«.
10 Set the month by pressing »– TUNING +«
and confirm by pressing »SELECT/i«.
11 Set the year by pressing »– TUNING +«.
12 Press »SELECT/i« to confirm setting.
– Display: »SAVED«.
13 Press »MENU« to end the setting.

ENGLISH
22
OPERATION
------------------------------------------------------------------------------------------------------------------------------
General functions
Switching on and off
1Press »ON/OFF« to switch the device on and
off.
Adjusting the volume
1Adjust the volume using »+VOLUME –«.
Adjusting the tone
1Adjust the tone using »TONE«.
DAB mode
For the best DAB reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source DAB
1Open the menu with »MENU«.
2Confirm the option »TO DAB« by pressing
»SELECT/i«.
– Display: »DAB«, then the name of a DAB radio
station.
Selecting stored stations
1Select the station you want using the preset
buttons »1,2,3,4,5« (presets 1 to 5) or using
»+ 5« and the preset buttons »1,2,3,4,5«
(presets 6 to 10);
or
select the desired station by pressing
»– TUNING +«.
Displaying DAB station information
1To display information on the current DAB
station, press »SELECT/i« repeatedly.
– The following display appears in succession:
Information from the provider (e.g. to the
actual broadcast, the title of the song, the
e-mail address), the signal strength, the genre,
the current frequency, reference to signal
interference (at optimum signal display »ERR:
0«) the bit rate, the broadcasting format, the
current time and date.
Setting Dynamic Range Control (DRC)
for DAB stations
When you activate Dynamic Range Control, you
can hear lower sounds better in a loud environment.
1Open the menu with »MENU«.
2Select the option »DRC« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »DRC OFF«.
3Select the option “DRC LOW” or “DRC HIGH”
by presing »– TUNING +« and confirm by
pressing »SELECT/i«.
4Press »MENU« to end the display.
Note:
7
The DAB station must support DRC.
FM mode
For the best FM reception, it is sufficient to extend
the telescopic antenna and direct it accordingly.
Selecting the input source FM
1Open the menu with »MENU«.
2Select the option »TO FM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »FM«, then the frequency of a FM
radio station.
Selecting stored stations
1Select the station you want using the preset
buttons »1,2,3,4,5« (presets 1 to 5) or using
»+ 5« and the preset buttons »1,2,3,4,5«
(presets 6 to 10).
Displaying RDS station informations
RDS (Radio Data System) is an information
system which is transmitted additionally by most
FM stations.
Notes:
7 It may take some time before all RDS
information is available.
7 GRUNDIG has no influence on the
correctness of such information.
1Press »SELECT/i« repeatedly.
– The following display appears in succesion:
radio text (if offered), station type (PTY),
name of the radio station, the current time
and date.

23
ENGLISH
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------
Note:
7
The alarm function is only available during
mains operation, it is disabled during battery
use.
Setting the alarm times
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »ALARM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »ALARM« flash.
5Press »SELECT/i«, select Timer On (»ON«)
by pressing »– TUNING +« and confirm by
pressing »SELECT/i«.
– Display: e.g. »6 : 00 AM«.
6Set the hours by pressing »– TUNING +« and
confirm by pressing »SELECT/i«.
7Set the minutes by pressing »– TUNING +«
and confirm by pressing »SELECT/i«.
8Set the clock format (12 or 24 hours) by
pressing »– TUNING +« and confirm by
pressing »SELECT/i«.
9Select the desired alarm day (Daily, Once,
Weekends or Weekdays) by pressing
»– TUNING +«.
Notes:
7
If the alarm is set to „Once“ continue with
step 10.
7
Otherwise, end settings with step 13.
10 Set the day by pressing »– TUNING +« and
confirm by pressing »SELECT/i«.
11 Set the month by pressing »– TUNING +«
and confirm by pressing »SELECT/i«.
12 Set the year by pressing »– TUNING +«.
13 Press »SELECT/i« to end the setting.
– Display: »SAVED«.
Alarm with signal tone
1Set the alarm signal tone (»e«) using
»BUZZER/RADIO« to position »BUZZER«.
– Display: »e«.
– The alarm goes on with a signal tone at the
set time.
Alarm with radio station
1Select the radio alarm (»§«) using
»BUZZER/RADIO« to position »RADIO«.
– Display: »§«.
– The radio switches on to the last listened radio
station at the set alarm time
Interrupting the alarm
1Press »S« while the alarm is sounding.
– Display: »e« or »§« flash.
– The alarm (signal tone or radio) stops.
– The alarm goes on again in 5-minute intervals
(the total alarm time is 90 minutes).
Cancelling alarm stand-by
1Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »§«.
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating and deactivating the
alarm
1Press »ON/OFF« to switch off the device.
2Press »AL/ATS« to deactivate the alarm stand-
by.
– Display: »OFF« and »e« or »§«
disappears.
– The set alarm time is saved
3Press »AL/ATS« to reactivate the alarm stand-
by.
– Display: »ON« and »e« or »§«.

ENGLISH
24
Sleep Timer
The device has a sleep timer which switches off
in radio mode at a preset time. It is possible to
adjust the sleep time between 10 and 90 minutes
in 10 minute increments.
Select the switch-off time for the
sleep timer
1Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2Open the menu with »MENU«.
3Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
4Select the option »SLEEP« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: »OFF«.
5Set the switch-off time by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: » ≤« and the switch-off time.
Notes:
7
To check the remaining switch-off time press
briefly »SLEEP«.
7
You can set the switch-off time also by
presing »SLEEP« (in 10 minutes increments).
Switch off the sleep timer
1To switch off the sleep timer earlier, select in the
option »SLEEP« the option »OFF« by pressing
»– TUNING +«.
– Display: » ≤« disappears.
TIMER MODE
--------------------------------------------------------------------------------------------------------------------------

25
ENGLISH
Disabling the buttons
1Use »P/Px« on the bottom of the
device to disable the buttons.
– Display: »P«.
2Use »P/Px« on the bottom of the
device to enable the buttons.
– Display: »P« disappears.
Select software version
1Open the menu with »MENU«.
2Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
3Select the option »SW VER« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– Display: actual software version.
4Press »MENU« to end the display.
Deleting all settings (Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1Open the menu with »MENU«.
2Select the option »SYSTEM« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
3Select the option »RESET« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– A safety confirmation is displayed.
4Select the option »Y« (Yes) by pressing
»TUNING +«.
Note:
7
To cancel the function select the option »N«
(No) by pressing »– TUNING«.
5Press »SELECT/i« to confirm setting.
– Display: »RESTART«.
Delete the program list for DAB
radio stations
If you move to a different part of the country,
some of the radio stations which were listed may
no longer be available.
1Open the menu with »MENU«.
2Select the option »PRUNE« by pressing
»– TUNING +« and confirm by pressing
»SELECT/i«.
– A safety confirmation is displayed.
3Select the option »Y« (Yes) by pressing
»TUNING +«.
Note:
7
To cancel the function select the option »N«
(No) by pressing »– TUNING«.
4Press »SELECT/i« to confirm setting.
– Display: »RESTART«.
5Press »MENU« to end the setting.
– In the program list you will find only available
radio stations.
SPECIAL FUNCTIONS
--------------------------------------------------------------------------------------------

ENGLISH
26
Tecnical data
This device is noise-suppressed
according to the applicable EU
directives. This product fulfils the
European directives 2004/108/
EC, 2006/95/EC and 2009/125/EC.
The type plate is located on the bottom of the
device.
Power supply: 230 V~, 50/60 Hz
Max. power consumtion:
Operating < 6 W, Stand-by < 0,5 W
Output:
DIN 45324, 10% THD 1 W
Frequency band:
DAB/DAB+ 174,928 ... 239,200 MHz
FM 87.5 ... 108.0 MHz
Dimension and weight:
B x H x T 247 x 127 x 68 mm
Weight approx. 0.9 kg
Technical and design modifications reserved.
INFORMATION
------------------------------------------------------------------------------------------------------------------