
GRUNDIG Service 3
CUC 2103, 2105, 2121, 2121 M, 2121 GB Allgemeiner Teil / General Section
Es gelten die Vorschriften und Sicherheitshinweise
gemäß dem Service Manual "Sicherheit", Material-
nummer 720108000000, sowie zusätzlich die eventu-
ell abweichenden, landesspezifischen Vorschriften!
The regulations and safety instructions shall be valid
as provided by the "Safety" Service Manual, part
number 720108000000, as well as the respective
national deviations.
The Service Manual CUC 2103/M, CUC 2121/M applies to the sets
specified on page 2.
This supplement describes the differences and the additionally fitted
components of the sets.
Basic instructions for servicing are given in the:
–Service Manual CUC 2103/M, CUC 2121/M
(Part number 720100407000)
–Service Manual “Safety” (Part number 720108000000)
Table of Contents
Page
Notes ............................................................................................... 3
Hints of Service and Special Functions .......................................... 4
List of Modules – Service Manual with Supplements ...................... 4
Module List ...................................................................................... 5
Technical Data ................................................................................ 8
Chassis Board ............................................................................... 12
Oscillograms (Chassis) ................................................................. 17
Chassis Board (Enlarged) ............................................................. 19
Circuit Diagram Mains Section ...................................................... 23
Circuit Diagram Deflection Section ............................................... 25
Circuit Diagram Processor Section ............................................... 27
Circuit Diagram Tuner ................................................................... 29
Variant Equipment Video .............................................................. 29
Circuit Diagram Video Section ...................................................... 31
Circuit Diagram Audio ................................................................... 33
CRT Panel 293051223700 / 3800 ................................................ 35
Module Mains Unit 12V ................................................................. 37
Processing Board 293052191600 / 2500 / 2600 / 3000 /
3300 / 3700 / 4100 / 4200 ............................... 41
Spare Parts Lists ........................................................................... 44
Für die auf der Seite 2 aufgeführten Geräte gilt das Service Manual
CUC 2103/M, CUC 2121/M.
Diese Ergänzung dokumentiert die Unterschiede bzw. zusätzlichen
Bestückungen der Geräte.
Grundlage für den Service sind:
–Service Manual CUC 2103/M, CUC 2121/M
(Materialnummer 720100407000)
–Service Manual "Sicherheit" (Materialnummer 720108000000)
Inhaltsverzeichnis
Seite
Hinweise ......................................................................................... 3
Hinweise zu Service- und Sonderfunktionen .................................. 4
Modulauflistung – Service Manual mit Ergänzungen ...................... 4
Modulübersicht ................................................................................ 5
Technische Daten ........................................................................... 8
Chassisplatte ................................................................................ 12
Oszillogramme (Chassis) .............................................................. 17
Chassisplatte (vergrößert) ............................................................ 19
Teilschaltplan Netzteil ................................................................... 23
Teilschaltplan Ablenkung .............................................................. 25
Teilschaltplan Prozessor ............................................................... 27
Teilschaltplan Tuner ...................................................................... 29
Variantenbestückung Video .......................................................... 29
Teilschaltplan Video ...................................................................... 31
Teilschaltplan Audio ...................................................................... 33
Bildrohrplatte 293051223700 / 3800 ............................................. 35
Baustein Netzteil 12V .................................................................... 37
Prozessor-Platte 293052191600 / 2500 / 2600 / 3000 /
3300 / 3700 / 4100 / 4200 ................................. 41
Ersatzteillisten ............................................................................... 44
Hinweise
Wegen Veränderung des Schwerpunktes beim Abnehmen der
Rückwand bzw. Ausbau des Chassis oder Entfernen eines even-
tuell vorhandenen Standfußes ist das Gerät gegen Kippen zu
sichern.
Vor dem Öffnen des Gehäuses zuerst den Netzstecker ziehen!
Leitungsverlegung
Bevor Sie die Leitungen und insbesondere die Masseleitungen lösen,
muss die Leitungsverlegung zu den einzelnen Baugruppen wie z.B.
Chassis, Netzschalterplatte, Bedieneinheit, Bildrohrplatte, Ablenk-
einheit, Lautsprecher usw. beachtet werden.
Nach erfolgter Reparatur ist es notwendig, die Leitungsführung wieder
in den werkseitigen Zustand zu versetzen um evtl. spätere Ausfälle
oder Störungen zu vermeiden.
Netzkabel
Diese Geräte dürfen nur mit dem Original-Netzanschlusskabel mit
integrierter Entstördrossel betrieben werden. Dieses Netzkabel ver-
hindert Störungen aus dem Netz und ist Bestandteil der Geräte-
zulassung. Im Ersatzfall bestellen Sie bitte ausschließlich das Netz-
kabel laut Ersatzteilliste.
DOLBY-Hinweis
DOLBY und das Doppel-D-Symbol ijsind Warenzeichen der Dolby
Laboratories Licensing Corporation.
Notes
Because of the change of the centre of gravity when removing the
rear panel, the chassis or an existing stand, it is necessary to
protect the set from tipping.
Before opening the cabinet disconnect the mains plug!
Wiring
Before disconnecting any leads and especially the earth connecting
leads observe the way they are routed to the individual assemblies like
the chassis, mains switch panel, keyboard control panel, picture tube
panel, deflection unit, loudspeaker and so on.
On completion of the repairs the leads must be laid out as originally
fitted at the factory to avoid later failures or disturbances.
Mains Cable
TheTVreceiver mustonlybe operatedwithan originalmainsconnecting
cable with an interference suppressor choke integrated in the mains
plug.Thismainscablepreventsinterferencefrom the mains supply and
ispartof theproductapproval. Forreplacementpleaseorder exclusively
the mains connecting cable specified in the spare parts list.
DOLBY Hint
DOLBY and the double-D symbol ijare trademarks of Dolby
Laboratories Licensing Corporation.