Grundig Davio 55 User manual

ǵ
DEUTSCH
ENGLISH
FRANÇAIS
COLOR TELEVISION
DAVIO 55
ST 55-854/8 Dolby
;

22
CONTENTS________________________________________________________________________
3 Installation and safety
4 Connection and preparation
The front of the TV set
Connecting aerial and mains cable
Putting batteries into the remote control
5 At a glance
The remote control
6 Settings
Setting TV channels – automatically ( with ATS searching)
Picture settings
Sound settings
10 Television mode
11 Teletext mode
TOP or FLOF text mode
Normal text mode
Additional functions
Selecting functions – from the symbol bar
14 Convenience functions
... in the »SPECIAL FUNCTIONS« menu
Setting switch-off time with the »SLEEP TIMER« menu
15 Child-proof lock
16 Operating with external appliances
Decoder or satellite receiver
Video recorder or SET-TOP box
Camcorder
Headphones
19 Special settings
Limiting channel selection
Set TV channels
Manually adjusting colour standards
21 Information
Technical data
Service notes for the authorised dealer
EURO-AV (Scart) socket contact assignment
Customer information
Rectifying malfunctions

ENGLISH
3
INSTALLATION AND SAFETY_________________________
Please observe the following notes when setting up and connecting the TV set:
This set has been designed for the reception and reproduction of picture and
sound signals.
Any other use is explicitly forbidden.
The ideal viewing distance from the screen is 5 times the diagonal width of the
screen.
External light shining on the screen adversely affects picture quality.
Assure that there is enough space inside the cabinet.
The TV set is designated for operation in dry rooms. Should you nevertheless
operate it outside, make absolutely sure that it is protected against dampness
(rain, water splashes). Never expose the TV set to moisture of any sort.
Do not place vessels filled with fluid (vases or similar) on the TV set. The vessel
may tip over and the fluid may cause an electrical hazard.
Put the TV set on an even and hard surface. Do not place objects (for example,
newspapers) on the TV set and do not place the set on a mat or similar object.
Do not place the TV set close to the heating or in direct sunlight, as it could
overheat.
Heat buildup can be dangerous and is detrimental to the service life of the
equipment. From time to time, have a technician come to clean the inside of the set.
Keep the TV set away from magnetic fields (for example, stereo speakers).
Do not open the TV set under any circumstance. The manufacturer accepts no
liability for damage resulting from unauthorised tampering.
Make sure that the mains cable does not become damaged.
The TV set may only be operated using the mains cable supplied.
Electrical storms represent a danger for every type of electrical device. Even if
the set is switched off, it could be damaged by a lightning strike hitting the
mains and/or the aerial lead. Therefore, always disconnect the mains plug and
aerial plug when there is an electrical storm.
When cleaning the screen, use only a soft, damp cloth. Use clean water only.
10
cm
10
cm
20
cm
20 cm
Krieg am Golf
! SERVICE !! SERVICE !! SERVICE !

4
CONNECTION AND PREPARATION _______
The front of the TV set
IO Switches the TV set on/off
–z+Volume
–P + Channel selection
Switches the TV set to standby mode (»P+« only)
Yellow socket Video input for camcorder
White and red Audio input for camcorder
sockets
yHeadphone connection (3.5 mm ø jack)
Connecting aerial and mains cable
1Insert the aerial cable of the house aerial into aerial socket »É« on the
TV set.
2Insert the mains cable supplied into socket »~« on the TV set.
3Insert the mains cable plug into the mains socket.
Putting batteries into the remote control
1Open the battery compartment by pulling off the cover.
2Insert batteries (UM-3 or AA, 2 x1.5 V).
Observe the polarity when inserting the batteries (marked on base of battery
compartment).
Note:
When a battery is dead, the indication »Battery« appears.
If your television does not react to the remote control commands correctly,
then the batteries could be dead. Always remove empty batteries. There is no
liability for damage caused by leaking batteries.
Environmental note:
The batteries – even those free of heavy metals – cannot be disposed of in
normal household rubbish. Used batteries must be disposed of in used
battery collection containers in businesses or be taken to public waste
disposal facilities.
P
VIDEO IN L AUDIO IN R
y
P
VIDEO IN L AUDIO IN R
y
AV1
TV R

ENGLISH
5
AT A GLANCE ________________________________________________________________
The remote control
ǼSwitches off the TV set (standby).
1…9 Switches the TV set on from standby mode;
AV 0 selects channels and AV channel positions directly.
iCalls up the »DIALOG CENTER« (with »i« and »OK«);
selects previous menu page.
ĭSound on/off (mute).
,. Switches the TV set on from standby mode (»,« only);
selects channels step by step;
moves the cursor up/down.
FE Changes the volume;
moves the cursor to the left/right.
OK Changes and activates various functions;
calls up the channel selection list.
AUX Selection button for various functions.
TXT Switches between teletext mode and television mode;
completes menu function.
zCalls up the »PICTURE« menu;
turns one page back in teletext mode.
ȄClock on/off;
turns to the next available page in teletext mode.
ESelects chapter or held page desired in teletext mode.
FCalls up the »SOUND« menu.
Selects topic desired, or fill in waiting time, in teletext mode.
–i+Adjusts the colour.
–v+Adjusts the brightness.
SAT Switches to the operation of a GRUNDIG satellite receiver.
VIDEO Switches to the operation of a GRUNDIG video recorder.
3
21
654
987
0
SAT/TV
TXTAUX
VIDEO
VIDEO
EF
Ȅ
P
OK
P
TELEPILOT 750C

6
SETTINGS____________________________________________________________________________
Setting TV channels –
automatically (with ATS searching)
The set is equipped with an automatic channel search system.
You start the ATS search and can then sort the television channels into an order
of your choice.
There are 99 channel positions available, which can be assigned to television
channels from the aerial or from the cable connection as desired.
You can also delete from the channel list television channels which are found
more than once, or which have poor reception.
1Switching on the TV set with »IO « on the TV set.
– The »LANGUAGE SELECTION« menu will be displayed.
2Select a language with »,«or».« and confirm with »OK«.
– The »SELECT COUNTRY« menu will be displayed.
3Select a country with »,«or».« and confirm with »OK«.
Note:
If your country is not displayed in, select the line »others«.
The »MANUAL TUNING« menu will be displayed.
Using »,«or».«, select either »Cable (frequency sel./MHz) « or
»Cable/aerial (channel sel.)«, and confirm with »OK«.
– The »AUTOMATIC TUNING SYSTEM« menu will be displayed, and the
automatic channel search will begin.
– Depending on the number of channels received, this may take a minute or
longer.
– Following the search, the TV set will switch to channel position 1 and the
menu »SORT« will be displayed.
Deleting TV channels
1In the »SORT« menu, select the TV channel to be deleted with »,«or
».«.
2Delete the TV channel with »AUX«.
Note:
To delete further TV channels, repeat points 1 and 2.
AUTOMATIC TUNING SYSTEM
Please wait ...
■–
_– _– _– _– _– _– _– _– _– _– _– _– _– _– _– _– _– _
SORT
OK Sort
AUX Delete
ǺReturn
TXT TV
ĵ–––––––––––––––––Ł
P 01 ARD
P 02 ZDF
P 03 RTL
P 04 SAT1
P 05 PRO7
P 06 BR 4
P 07
P 08
P 09
P 10
LANGUAGE SELECTION
OK
CZ Cestina
D Deutsch
DK Dansk
E Espanol
F Francais
FIN Suomi
GB English
H Magyar
I Italiano
N Norge
NL Nederlands
P Portugues
PL Polski
S Svenska
SI Slovenija
SK Slovensky
ĵ–-–-––––––––––––––––––––––––––––––Ł
SELECT COUNTRY
OK
A Österreich
B Belgique
CH Schweiz
CZ Ceska republ.
D Deutschland
DK Danmark
E Espana
F France
FIN Suomi
GB Great Britain 1/2
ĵ––––––––––––––––––––––Ł

ENGLISH
7
SETTINGS ___________________________________________________________________________________
Sorting TV channels
1In the »SORT« menu, select the TV channel to be moved with »,«or
».«.
2Mark the TV channel with »OK«.
3Select a new channel position with »,«or».«.
4Save the setting with »OK«.
Note:
To sort further TV channels, repeat points 1 to 4.
Completing the settings
1Complete the settings with »TXT«.
Picture settings
Setting brightness, colour, contrast, definition and tint
1Call up the »PICTURE« menu with »z«.
– The »PICTURE« menu appears.
2Select the line »Brightness«, »Color«, »Contrast«, »Sharpness« or »Tint«
(color tone) with »,«or».« and set the required value with »F«or
»E« (»Tint« indication only for NTSC reception).
Note:
The set has been tested with maximum contrast in order to control the reliabi-
lity of all modules. Depending on the location of the set and the light level in
the room (ambient light) it is nevertheless a good idea to reduce the contrast
slightly for optimum picture quality.
3Complete the setting with »TXT«.
Perfect Clear
Perfect Clear increases contrast in dark areas of the picture. This gives the
picture depth.
1Call up the »PICTURE« menu with »z«.
– The »PICTURE« menu appears.
2Select the line »Perfect Clear« with »,«or».« and switch the function
on or off with »F«or»E«.
3Complete the setting with »TXT«.
SORT
OK Sort
AUX Delete
ǺReturn
TXT TV
ĵ–––––––––––––––––Ł
P 01 ARD
P 02 ZDF
P 03 RTL
P 04 SAT1
P 05 PRO7
P 06 BR 3
P 07
P 08
P 09
P 10
PICTURE
TXT
Brightness ľ■■■■■■■■■ –
_– _– _ı
Color ■■■■■■■ –
_– _– _– _– _
Contrast ■■■■■■■ –
_– _– _– _– _
Sharpness ■■■■■■■ –
_– _– _– _– _n
Perfect Clear on
ĵ–––––––––––Ł
PICTURE
TXT
Brigthness ■■■■■■■■■ –
_– _– _
Color ■■■■■■■ –
_– _– _– _– _
Contrast ■■■■■■■ –
_– _– _– _– _
Sharpness ■■■■■■■ –
_– _– _– _– _n
Perfect Clear ľon ı
ĵ––––––––––Ł

8
SETTINGS ___________________________________________________________________________________
Sound settings
Stereo depth
Widens the acoustic pattern for stereo programmes and improves it for mono
programmes.
1Call up the »SOUND« menu with »F«.
2Select the »ʀ. ǁ» lines with »,«or».«.
3Select »ʀ....... ǁ« with »F«or»E«.
4Complete the setting with »TXT«.
Dolby Surround *
Dolby Surround is an electronic solution which is fully integrated in the TV and
requires only 2 additional speakers to create Dolby Surround effects.
1Call up the »SOUND« menu with »F«.
2Select the »ʀ. ǁ» lines with »,«or».«.
3Select »Dolby Surround« with »F«or»E«.
4Complete the setting with »TXT«.
SOUND
TXT
ʀ. ǁľʀ. . . . . . ǁı
ʀP01 Stereo
yStereo
u
ɼ
ɦ
ĵ––––––––––––––––--–––Ł
SOUND
TXT
ʀ. ǁľDolby Surround ı
ʀP01 Stereo
yStereo
u
ɼ
ɦ
ĵ––––––––––––––––--–––Ł
* Under license from the Dolby Laboratories Licensing Corporation.
DOLBY and the double D symbol ijare trademarks of the Dolby Laboratories Licensing
Corporation.

ENGLISH
9
SETTINGS ___________________________________________________________________________________
Changing the balance, the bass and the treble
1Call up the »SOUND« menu with »F«.
2Select the lines required »u« – balance, »ɼ« – bass or »ɦ« – treble with
»,«or».« and set the required value with »F«or»E«.
3Complete the setting with »TXT«.
Stereo (two-channel), mono
If the device receives two-channel transmissions – e.g. a film in the original on
sound channel B (display: »Mono B«) and the synchronised version on sound
channel A (display: »Mono A«) – you can select your preferred sound channel.
If the device receives stereo broadcasts, it automatically switches to stereo sound
playback (display: »Stereo«).
The sound setting last selected will be stored according to the channel.
1Call up the »SOUND« menu with »F«.
2Select line »ʀP01« with »,«or».«.
3 If the sound reproduction of a particular channel is constantly mono, select the
lines »ʀP..« with »,«or».« and confirm with »OK«.
4Complete the setting with »TXT«.
Note:
Repeat the setting to cancel this function.
SOUND
TXT
ʀ. ǁʀ.. ǁ
ʀP01 Stereo
yStereo
u
ɼ
ɦľı
ĵ––––––––––––––––--–––Ł
SOUND
OK MONO FIX TXT
ʀ. ǁʀ.. ǁ
ʀP01 Mono A
yMono B
u
ɼ
ɦ
ĵ––––––––––––––––--–––Ł

10
TELEVISION MODE___________________________________________________
Switching on/off
1Switch on the TV set with »IO « on the TV set.
– The TV set switches on with the last channel position viewed.
2Switch TV set to standby mode with »Ǽ«.
Switch the TV set on from standby mode with »1…AV 0« or »P«.
3Turn the TV set completely off with »IO « on the TV set.
This saves energy.
Selecting channel positions
1Select channel positions (including AV) directly with »1…AV 0«.
or
2Select channel positions step by step with »,«or».«; or
3Blend the channel selection list in and out with »OK«, select the TV channel
desired (not including »AV«) with »,«or».« or with »F«or»E«.
Adjusting volume, brightness and color contrast
1Adjust the volume with »F«or»E«.
2Adjust the brightness with »–v« or »v+«.
3Adjust the colour contrast with »–i« or »i+«.
Notes:
Each value changed is saved after a few seconds.
Reset to the factory setting by pressing »AUX« and then »OK«.
Switching sound on/off
1Switch the sound on or off with »ĭ« (mute).
Blending clock display in/out
1Blend the clock display in or out with »Ȅ« (only for TV channels with tele-
text).
Blending-in channel position number briefly
1Blend the channel position number in or out with »i«.
– The station name is also displayed with some television channels.
Displaying channel position number constantly
1Press »i« and wait until the »OK DIALOG CENTER« display disappears.
– The channel position number will remain on the screen.
2Position the channel position number before the »OK DIALOG CENTER« dis-
appears by selecting the desired position with »F«or»E« (upper left or
right).
3Blend out the channel display number by briefly pressing »i« twice.
3
21
654
987
0
SAT/TV
TXTAUX
VIDEO
VIDEO
EF
Ȅ
P
OK
P
TELEPILOT 750C

ENGLISH
11
TELETEXT MODE __________________________________________________________
3
21
654
987
0
SAT/TV
TXTAUX
VIDEO
VIDEO
EF
Ȅ
P
OK
P
TELEPILOT 750C
TOP text or FLOF text mode
1Switch to teletext with »TXT«.
Either the contents page 100 or the teletext page last viewed will appear.
2The teletext pages can also be selected directly with »1...0« (return to con-
tents page 100 with »i«).
Note:
An information line consisting of a red, green, yellow and blue lettering field
is located at the bottom of the screen. The remote control has corresponding
colour-coded buttons.
3Turn back one page or select the chapter desired using »z« (red).
4Turn forward one page or select the topic desired with »Ȅ« (green).
5Select the chapter desired with »E« (yellow).
6Select the topic desired with »F« (blue).
7Switch off teletext mode with »TXT«.
Switching TOP/FLOF text on/off
If TOP/FLOF text is not available, you can switch to normal text (Basictext).
1Call up »VIDEOTEXT MENU« with »i« and »OK«.
2Select the line »TOP/FLOF« with »,«or».« and switch »TOP/FLOF«
on or off with »F«or»E«.
3Complete the setting with »TXT«.
Normal text mode (Basictext)
1Switch to teletext with »TXT«.
– Either the contents page 100 or the teletext page last viewed will appear.
2The teletext pages can also be selected directly with »1...0« (return to con-
tents page 100 with »i«).
3Turn back one page with »z« (red).
4Turn to the next page available with »Ȅ« (green).
5Hold multiple pages with »E« (yellow).
6Filling in waiting time with »F« (blue).
– This switches temporarily to the current programme.
7Select the desired sub-page with »0« and »;« or »:«.
– The sub-page selected will appear after a short time.
8Switch off teletext mode with »TXT«.
VIDEOTEXT MENU
TXT
TOP/FLOF ľon ı
Lang. Group P01 West+GR+TR
ĵ–––––Ł

12
TELETEXT MODE_________________________________________________________________________
Additional functions
Select teletext pages directly (Page-Catching)
Many contents pages contain three-digit page numbers which may be selected
directly.
1Select the page number desired with »,«or».«.
– »Pagecatching OK« will appear on the upper edge of the picture; a cursor
will be positioned on the first or last page number.
2Confirm with »OK«.
– The page will appear after a short time.
Filling in waiting time
The waiting period before a teletext page appears can be filled in.
1Enter the teletext page number with three digits using the »0… 9« buttons .
2Call up the “Symbol bar” with »AUX«. Select the »X« symbol using »F«
or »E« then press »OK«.
– You will see the television picture and the »X« symbol appears in the top
part of the screen. As soon as the page number appears instead of the »X«
symbol, the page has been found.
3Display the page found by pressing »OK«.
Enlarging the teletext page
1Enlarge the teletext page by pressing »i+«.
Calling up sub-pages
1Call up sub-pages with »–i« (not in normal text mode).
2Select the four digit of the sub-page desired with »0...9«.
– The sub-page selected will appear after a short time.
Page hold for multiple pages
A multi-page display can contain several sub-pages which are automatically
paged forward by the broadcasting station.
1Hold the sub-page with »–v«.
Reveal answer
Some teletext pages contain “hidden answers” or information. These can be
called up.
1Reveal the information with »v+«.
2Hide the information with »v+«.
3
21
654
987
0
SAT/TV
TXTAUX
VIDEO
VIDEO
EF
Ȅ
P
OK
P
TELEPILOT 750C

ENGLISH
13
TELETEXT MODE_________________________________________________________________________
Selecting functions – from the symbol bar
1Switch to teletext mode with »TXT«.
2Call up the “Symbol bar” with »AUX«.
– The symbol bar will appear at the bottom of the screen.
The symbol bar has the following functions:
Double character size
Fill waiting time
Call up sub-page directly
Reveal answer
Hold page
3Select the function with »F« or »E« and call up with »OK«.
4Switch off teletext mode with »TXT«.
00
D
X
STOP

14
... in the »SPECIAL FUNCTIONS« menu
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »SPECIAL FUNCTIONS« with »,«or».« and confirm
with »OK«.
Note:
Further operating instructions can be found in the chapters which follow.
Switch picture/sound scales on/off
When adjusting volume, brightness and colour contrast, the corresponding
scale appears on the screen. This scale can be switched off.
1Select the line »Pic./sound opt.« with »,«or».« and select »off« with
»F«or»E«.
2Complete the setting with »TXT«.
Equalise volume
The volume of normal TV broadcasts and commercials may be different. This
volume fluctuation can be equalised.
1Select the line »Volume Limiter« with »,«or».« and select »on« with
»F«or»E«.
Note:
The line »Volume Limiter« will not appear when »Dolby Surround« has been
selected in the »SOUND« menu.
2Complete the setting with »TXT«.
Setting switch-off time with the »SLEEP TIMER« menu
A switch-off time can be entered for the TV set using the »SLEEP TIMER« menu.
The TV set switches to standby mode when the set time has elapsed.
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »SLEEP TIMER« with »,«or».« and confirm with »OK«.
3Enter the switch-off time desired with two digits (from 01 to 99 minutes) with
»1…0«.
Note:
The switch-off time can be deleted with »AUX«.
4Complete the setting with »TXT«.
CONVENIENCE FUNCTIONS__________________________
DIALOG CENTER
OK TXT
LANGUAGE SELECTION
SLEEP TIMER
PARENTAL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
SERVICE
ĵ–––––––––––––––––––––––––––Ł
SPECIAL FUNCTIONS
ǺTXT
Pic./sound opt. ľon ı
Volume Limiter off
Decoder P01 off
ĵ–––––––Ł
SPECIAL FUNCTIONS
ǺTXT
Pic./sound opt. on
Volume Limiter ľoff ı
Decoder P01 off
ĵ–––––––Ł
SLEEP TIMER
Ǻ0-9 TXT
Ȅ–– –– Ȅ
min.

ENGLISH
15
Activating child-proof lock
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »PARENTAL LOCK« with »,«or».« and confirm with
»OK«.
3Enter four-digit PIN »1...0 « and save with »OK«.
– The key symbol will appear in red.
4Complete the setting with »TXT«.
– When the TV set has been turned off and turned on again, the child-proof
lock will be activated. The page »PARENTAL LOCK« will appear, and all
functions are locked.
Switching off child-proof lock briefly
1Turn television set on and enter the four-digit PIN with »1...0 «.
– The set switches to the TV picture. When the set has been switched off and
then on once more, the lock reactivates.
Switching off child-proof lock
1Switch TV set on.
2Enter four-digit PIN with »1...0 «.
3Call up »DIALOG CENTER« by pressing »i« and then »OK«.
4Select the line »PARENTAL LOCK« with »,«or».« and confirm with
»OK«.
5Enter four-digit PIN with »1...0 «.
– The key symbol appears in black: the child-proof lock has been cleared.
6Complete the setting with »TXT«.
Note:
If you have forgotten your PIN, you can use the digit combination given in
the section “Rectifying malfunctions” on page 22.
CHILD-PROOF LOCK_______________________________________________
DIALOG CENTER
OK TXT
LANGUAGE SELECTION
SLEEP TIMER
PARENTAL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
SERVICE
ĵ–––––––––––––––––––––––––––Ł
PARENTAL LOCK
Ǻ0-9 TXT
v
7
–– – –
PARENTAL LOCK
Ǻ0-9 TXT
v
7
–– – –

16
Decoder or satellite receiver
A decoder is required if the TV set is to receive coded channels from private
broadcasting companies.
Connecting a decoder or satellite receiver
1Connect the »AV 1« socket of the TV set to the corresponding socket on the
decoder with a EURO-AV (Scart) cable.
Notes:
Alternatively, a satellite receiver can be connected to this socket.
If a satellite receiver and a decoder are to be operated, the decoder must be
connected to the satellite receiver.
Settings for operating with a decoder
1Select the channel position to which the encoded programme is assigned.
– The TV set automatically switches to channel position »AV1«.
2Call up »DIALOG CENTER« by pressing »i« and then »OK«.
3Select the line »SPECIAL FUNCTIONS« with »,«or».« and confirm
with »OK«.
4Select the line »Decoder P ..« with »,«or».«.
– »P ..« shows the channel position selected.
5Select the setting »ON 1«, »ON 2« or »ON 3« with »F«or»E«.
– This setting depends on the decoder connected.
– If a decoder is not connected, set to »off«.
– In the background, the TV set switches to the last channel position set.
6Complete the setting with »TXT«.
OPERATING WITH EXTERNAL APPLIANCES
____
PAY-TV
AV1
Decoder
SPECIAL FUNCTIONS
ǺTXT
Pic./sound opt. on
Volume Limiter off
Decoder P01 ľON 1 ı
Video AV 1 VHS
ĵ–––––––––Ł

ENGLISH
17
Video recorder or SET-TOP box
Connecting a video recorder or SET-TOP box
1Connect the »AV 1« socket of the TV set to the corresponding socket on the
video recorder or the SET-TOP box with a EURO-AV (Scart) cable.
Notes:
Alternatively, a satellite receiver can be connected to this socket.
If a satellite receiver and a decoder are to be operated, the decoder must be
connected to the satellite receiver.
Set video standard (VHS or SVHS)
This setting depends on the video recorder connected.
1Press »AV 0« repeatedly until »AV 1« is displayed on the set.
2Call up »DIALOG CENTER« by pressing »i« and then »OK«.
3Select the line »SPECIAL FUNCTIONS« with »,«or».« and confirm
with »OK«.
4Select the line »VIDEO« with »,«or».« and use »F«or»E« to
select »VHS« or »S-VHS«.
5Complete the setting with »TXT«.
Operating with a video recorder or SET-TOP box
1Switch on the video recorder or SET-TOP box and select the function desired.
2Select channel position »AV1« with »0 AV«.
– The picture and tone information from the video recorder or SET-TOP box
can be heard and seen via the TV set.
OPERATING WITH EXTERNAL APPLIANCES ________________________
AV1
ń
R
L
AUDIO
R
L
I
N
O
U
T
2 EXTERNAL / DEC. - AV 2
1 EXTERNAL / EURO - AV 1
SPECIAL FUNCTIONS
ǺTXT
Pic./sound opt. on
Volume Limiter off
Decoder P 01 off
Video AV 1 ľVHS ı
ĵ–––––––––Ł

18
OPERATING WITH EXTERNAL APPLIANCES ________________________
Camcorder
Connect the camcorder
1Connect the yellow socket (VIDEO IN – picture signal) on the TV set and the
corresponding sockets on the camcorder with the RCA cable.
2Connect the white and red sockets (L AUDIO IN R – sound signal) on the
TV set and the corresponding sockets on the camcorder with the RCA cable.
Note:
The Mono-Camera-Recorder delivers the mono sound signal via the white
socket (L) on the TV set.
Operating with a camcorder
1Switch on the camcorder and start playback.
2Select channel position »AV2« with »AV 0«.
– The picture and sound information from the camcorder can be seen and
heard on the TV set (it is not possible to re-record to the EURO-AV socket).
Headphones
Connecting the headphones
1Insert the headphone plug (3,5 mm ø jack plug) into the front of the TV set.
– The speaker is switched off.
Select Stereo (two-channel), mono for the headphones
1Call up the »SOUND« menu with »F«.
2Select the line »y« with »,«or».« and select the required sound type
with »F«or»E«; »Mono« or »Stereo« and for two-channel broadcasts,
select »DUAL A« or »DUAL B«.
3Complete the setting with »TXT«.
Changing the volume of the headphones
1Call up the »SOUND« menu with »F«.
2Select the lines »y« with »,«or».« and press »F«.
– The »SOUND« menu is closed and a scale appears which can be used to
control the headphones.
3Set the volume with »F«or»E«.
– The altered value is displayed on a scale.
VIDEO IN L AUDIO IN R
y
SOUND
OK MONO FIX •ßTXT
ʀǁ ʀ.. ǁ
ʀP01 Mono A
yľMono B ı
u
ɼ
ɦ
ĵ––––––––––––––––--–––Ł
VIDEO IN L AUDIO IN R
y

ENGLISH
19
SPECIAL SETTINGS____________________________________________________
Limiting channel selection
The ATS search saves all television channels found and automatically “blocks”
the first non-assigned channel position. This means that only the television chan-
nels which were found can be selected using channel selection. This feature can
also be defined manually. In the example, all channels from channel position 6
have been “blocked”.
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »MANUAL TUNING« with »,«or».« and confirm with
»OK«.
3Select the channel position (in the example, 6) with »F«, »E« or
»1...0«.
4Select the line »C/S« with »,«or».« and use »F«or»E« to select
the »Channel« display.
Note:
The line »C/S« will not appear if the »SELECT COUNTRY« preselection
»others« and then »Cable (frequency sel./MHz)« were selected.
5Select the line »Channel« with »,«or».« and use »1...0« to enter
»00« or, in the case of frequency selection, »000« (dependent on the »SEL-
ECT COUNTRY« preselection).
6Save the setting with »OK«.
– Now, only the first five channel positions (and the »AV« channel position)
can be selected.
– After the direct selection of the first blocked channel position »1...0« (in
the example, 6), the “blocked” channel positions can be selected with
»,«or».«.
7Complete the setting with »TXT«.
Note:
If the blocked channel position is reallocated, the channel position limitation
set is cleared.
Setting TV channels
This setting is only necessary if a new TV channel is added and you wish to
maintain your own particular order for the channel positions. The TV channel
can be set directly or via the automatic channel search.
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »MANUAL TUNING« with »,«or».«, and confirm with
»OK«.
3Select the channel position with »F«, »E« or »1...0«.
4Select the line »C/S« with »,«or».«, and use »F«or»E« to select
the display »Channel« or »S-channel«.
Note:
The line »C/S« will not appear if the »SELECT COUNTRY« preselection
»others« and then »Cable (frequency sel./MHz)« were selected.
MANUAL TUNING
ǺOK Memorize TXT
Program 06
C/S ľChannel ı
Channel 34
Finetun. 00
Norm B/G (Universal)
Name RTL2
ĵ–––––––––––––Ł
MANUAL TUNING
ǺOK Memorize 0-9 •Tune TXT
Program 06
C/S Channel
Channel ľ00 ı
Finetun. 00
Norm B/G (Universal)
Name RTL2
ĵ–––––––––––––Ł
MANUAL TUNING
ǺOK Memorize 0-9 TXT
Program ľ06 ı
C/S Channel
Channel 34
Finetun. 00
Norm B/G (Universal)
Name RTL2
ĵ–––––––––––––Ł

20
SPECIAL SETTINGS ____________________________________________________________________
5Select the line »Channel« with »,«or».«, and use »F«, »E« or
»1...0«to enter the channel number desired (or the frequency, dependent
on the »SELECT COUNTRY« preselection);
or start the ATS search with »F« (blue).
Notes:
Repeat the automatic channel search until the channel desired appears.
Cancel the automatic channel search with »TXT«.
The colour and sound standards are allocated automatically. If the colour
and/or the sound are not correct, select the line »Standard« with »,«or
».«. Select the setting required with »F«or»E«.
6Select the line »Name« with »,«or».«, and confirm with »F« (blue).
Select the position required with »E«, use »,«or».« to select the letters
or digits required, and confirm with »F« (blue).
7To fine tune the picture (when necessary), select the line »Finetun.« with
»,«or».« and modify the fine tuning with »F«or»E«.
8Save the setting with »OK«.
Note:
To set further TV channels, repeat points 3 to 8.
9Complete the setting with »TXT«.
Resetting all TV channels
All the TV channels can be reset (e.g. when you move town).
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »AUTOMATIC TUNING SYSTEM« with »,«or».« and
confirm with »OK«.
– The »SELECT COUNTRY« menu will be blended in.
3Select a country with »,«or».« and confirm with »OK«.
– The ATS search will start.
Adjusting colour standards manually
When the ATS search is used to set the TV channels, the colour standards are
allocated automatically. Do not carry out this setting if the colour is already well
adjusted on the various channels.
1Call up »DIALOG CENTER« by pressing »i« and then »OK«.
2Select the line »SERVICE« with »,«or».« and confirm with »OK«.
3Select the line »Color« with »,«or».« and select the colour standard
required with »F«or»E«.
4Complete the setting with »TXT«.
Note:
The lines »IDP2« and »Service Code« are for the exclusive use of the author-
ised dealer.
MANUAL TUNING
ǺOK Memorize 0-9 •Tune TXT
Program 06
C/S Channel
Channel ľ00 ı
Finetun. 00
Norm B/G (Universal)
Name RTL2
ĵ–––––––––––––Ł
MANUAL TUNING
ǺOK Memorize •Change TXT
Program 06
C/S Channel
Channel 34
Finetun. 00
Norm B/G (Universal)
Name RTL2
ĵ–––––––––––––Ł
DIALOG CENTER
OK TXT
LANGUAGE SELECTION
SLEEP TIMER
PARENTAL LOCK
SPECIAL FUNCTIONS
PROGRAM SORT
MANUAL TUNING
AUTOMATIC TUNING SYSTEM
SERVICE
ĵ–––––––––––––––––––––––––––Ł
SERVICE
ǺTXT
Color P01 ľauto ı
IDP2
Service Code ––––
ĵ–––––––Ł