Grundig M 95-410/9 Service manual

COLOR TELEVISION
M 95-410/9 Reference/PIP

Ń
!You will find further information on connecting
various external units (e.g. SAT receiver, decoder)
in the dialog center menu section » Audio-/video
connections «.
rConnecting the TV set with the mains
rSwitching the set on/off
Press the ¢
IO button on the set.
Ń
!If the LED in the mains button is now illuminated,
then the unit is in stand-by mode.
Switch the unit on using the remote control by
pressing one of the 1, Pbuttons.
ķ
6
rPlease avoid:
Ń
!Damage to the set due to electrical storms by dis-
connecting the mains and aerial cables.
Ń
!Opening of the set and interventions by incompe-
tent persons.
Ń
!Heat build-up, moisture, and penetration of dust
and foreing objects into the set.
Ń
!Obstruction of the ventilation slots.
Ń
!Too little distances inside cabinets.
Ń
!Damage to the mains lead.
Ń
!Scratching and rubbing the picture screen.
Clean the picture screen only with a moistened and
soft cloth. Use clear and clean water only.
Ń
!Magnetic fields (loudspeaker boxes) near the set.
Safety and Installation
Connecting and Putting into Operation
rConnecting the set to the aerial
Connect the aerial cable with the aerial socket Éof
the TV set.
For TV/video recorder operation, connect as shown
in the figure.
This highly digitalized TV set assures optimum pic-
ture and sound quality.
Precondition for this is:
A properly working aerial system and an aerial
connecting cable with high screen factor (85 dB)
between the TV set and the aerial socket or the TV
set and the video recorder.
Avoid cable loops in the proximity of the TV set.
5 x
Krieg am Golf
10
cm
10
cm
20
cm
20 cm
! SERVICE !
AV 1 AV 2
VGA
AUDIO-OUT
L
R
AUDIO
IN
L
R
AV 3
ń
R
L
AUDIO
R
L
I
N
O
U
T
2 EXTERNAL / DEC. - AV 2
1 EXTERNAL / EURO - AV 1

rAssigning programme positions
This set is equipped with the automatic tuning
system ATS euro plus which performs the pro-
gramme assignment for you.
After switching on the set, confirm the »English«
dialogue language by pressing the Obutton.
If the »Select dialog language« page does not appear, press the .but-
ton and then the Obutton.
The dialogcenter appears on the screen.
Use the ]or |button to select the »Automatic programming« menu
line.
Press the Obutton.
Use the ]or |button to select the »Completely new programming«
line and then press the Obutton.
Confirm your country with the Obutton.
When the automatic programme allocation is com-
pleted, hints to the Easy Dialog System are displayed.
rThe Easy Dialog System
Your television is provided with the »Easy Dialog
System«.
With this system, all hints on operating the TV set
are no longer to be found in a printed instructions
manual but in dialog boxes which can be displayed
on the picture screen.
rThe Dialogcenter
The Dialogcenter is the control centre of your TV
set. It is called up by pressing the .and then the
Obutton. Via the displayed menu, you can make
settings, call up information and select precise help
for operating your TV set (for example an explanation
of the remote control handset, an index, tips and
tricks, etc.).
Simply try it out. You can do no harm!
rBasic operation
The dialogue symbols indicate for each operating
step with which buttons the different functions can
be carried out.
]/|Yellow bar up/down
In two-page menus, selection of the second page.
xc Set values.
OConfirm selected function.
¢
TXT Return to TV picture.
¢
?Help.
OK
TXT
P
P
]
|To 1st page xc
OCall up ¢
?Help ¢
TXT TV
ķ
7
Easy Dialog System

ķ
8
The Buttons on the Remote Control Handset
This is a brief explanation of the remote control but-
tons.
All functions will be explained in detail under
»Remote control« in the Dialogcentre.
Simply try out the functions.
1…9Select programme position
AV 0and switch on the TV set from
standby,
or
– select AV position,
– enter page numbers in Teletext
mode.
PSwitch on from standby. Select
programme positions step by
step
(1, 2, 3 ...)
pSelect programme positions
step by step (... 3, 2, 1)
or
pP Move cursor up / down.
xc Volume
or
xc Move cursor to the left / right.
When holding down the Por pbutton,
the programme position identifications
will scroll on the screen. When releasing
the pressed button, the TV set switches to
the selected programme position.
GModify and activate certain
functions.
hTime display on/off.
kPicture adjustments.
Access to the »Picture settings«
menu.
jStill picture, or ¢AUX plus j
Program scan
- i+Colour contrast.
SAT Satellite receiver remote control
(press and hold down the SAT
button).
bPress once: switch to standby.
Press twice: switch definitively off
(provided the mains economy
switch is activated.
hAccess to the DIALOG CENTER
¢
ʀSound on/off (mute).
¢
TXT Teletext mode ɫTV mode
¢
DCall up brief instructions.
gSound adjustments.
Access to the »Sound settings«
menu.
- v+Brightness
EPicture format switching
AUX Preselect button for certain func-
tions, e.g. ¢AUX plus j
Program scan
CInfo about current broadcast
PIP Picture-in-picture on/off.
VIDEO Video recorder remote control
(press and hold down the
VIDEO button).
VIDEO
OK
AUX
SAT PIP
TP 800
321
654
987
0
TXT
P
P

ķ
9
Specifications
rChannels:
C01 … C 99
Special channels S 01 … S41
rNorm:
PAL B/G; SECAM L; PAL-I/NIC-GB; SECAM D/K;
NTSC M; NIC (E-B-DK); NIC (S-N-SF)
rService hint for the specialist:
The mains cable is a plug-in type. For a replace-
ment, order it at our after-sales service under the
number 8290-991-316.
This unit conforms to VDE safety regulations and
directives of the Deutsche Bundespost (German
Federal Post Office; see certification mark on the
type sticker on the rear of the unit), as well as all
relevant ordinances governing X-ray emissions.
The picture tube, which emits X-rays, is sufficiently
shielded and therefore represents no danger. Acce-
lerating voltage is max. 34kV with a mean beam
current of 1.6mA.
Unauthorized tampering with the unit, in particular
making adjustments to the high voltage system, or
installing a different picture tube, can considerably
increase X-ray emissions. Units so altered no lon-
ger conform to applicable safety regulations and
may not be operated.
This TV set is prepared for satellite reception. As
extension kit, the module SER 150 is provided.
Ask your specialized dealer for further details.
This TV set is prepared for Dolby Sorround Prolo-
gic. As extension kit, the module DPL 1 is provi-
ded. Ask your specialized dealer for further
details.
rr Pin assignment of EURO-AV socket
If you want to connect other devices to your televi-
sion (for example, a computer or amplifier), your
dealer can provide you with a normed standard
connection by means of the following table:
Pin Signal
11 = Audio output, right
12 = Audio input, right
13 = Audio output, left
14 = Audio, earth
15 = Blue, earth
16 = Audio input left
17 = RGB blue input
18 = Switching voltage
19 = Green, earth
10 = Data line (MEGALOGIC)
11 = RGB green input
12 = –
13 = Red, earth
14 = Earth
15 = RGB red input
(S-Video = Chroma)
16 = RGB switching voltage
17 = Video, earth
18 = RGB switching voltage, earth
19 = Video output
20 = Video input
(S-Video = Luminanz)
21 Shielding/earth
220
21 119
rMains voltage:
220 – 240V, 50/60 Hz
(control range of the power supply unit 190 … 264V)
rPower consumption:
Set in Set in Sound output Sound output
operation standby Music power Sine power
approx. 180 W 6 W 80 W 2 x 10 + 20 W
Subject to alterations. E. and O.E.
Additional Information for Units sold in Great Britain
Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains supply.
In case this appliance is supplied with a Safety Standard Approved mains lead fit-
ted with a non-rewireable 13 Amp mains plug which, if unsuitable for your
socket, should be cut off and an appropriate plug fitted by a
qualified electrician. The fuse and fuse holder must be removed from the plug as
accidental insertion of the redundant plug into a 13 Amp socket is likely to cause
an electrical hazard.
Note: The severed plug must be destroyed to avoid a possible shock hazard
should it be inserted into a 13 Amp socket elsewhere.
If it is necessary to change the fuse in the non-rewireable plug, the correct type
and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse
cover must be refitted. If the fuse cover is lost or damaged the lead and plug must
not be used until a replacement is obtained. Replacement fuse covers should be
obtained from your dealer.
If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must
be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any othe type of
plug is used it must be protected by a 5 Amp fuse either in the plug or at the dis-
tribution board.
Important:
The wires in the mains lead are coloured in accordance with the follow-ing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not corre-
spond with the coloured marking identifying the terminals in your plug, proceed
as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter "N" or
coloured black.
Connect the BROWN coloured wire to the plug terminal marked with a letter "L" or
coloured red.
In no circumstance must any of the wires be connected to the terminal marked
with a letter "E", earth symbol , coloured green or green and yellow.
Replacement mains lead can be obtained from your dealer.

GRUNDIG AG ••D-90762 FÜRTH Printed in Germany
0 1 2 3 4 5 6 7 8 9
21603-941.01
!
GRUNDIG
+
P
+
P
-
Ķ
ķ
ĸ
ƴ
ń