GSA Eidos 102-HD User manual

Model 102-HD
BenchMaster w/toolbox
www.eidosergonomics.com
Warranty: Eidos products are covered by a
limited warranty for a period of ve years from
date of purchase.
*Online Product Registration :
http://www.eidosergonomics.com/product-registration.html
GS-07F-0033U
www.eidosergonomics.com
Eidos Corporation
4755 N. 48th Street, Lincoln,NE 68504
Telephone: [phone] FAX [phone]
E-mail: [email protected]
Web : www.eidosergonomics.com
Assembly Instructions
Tools Needed: No tools are needed to assemble the Model 102-HD.
Please read all instructions before assembling
Step 1: Place (B) gas spring
into (C) base and apply pressure
downward. Note: (All sizes of
gas springs use same assembly
instructions).
Step 3: Attach (E) back
rest assembly to (A) seat
mechanism and tighten
backrest adjustment knob.
Step 4: Apply weight by
sitting on the seat (A) and
then enjoy your new Eidos
Ergonomics Model 102HDT.
Step 2: Attach (A) seat /
toolbox assembly to (B) gas
spring by placing and press-
ing into place. Note: (Toolbox
is pre-assembled to seat).
A) Seat
E) Toolbox
B) Gas Spring
C) Base
Optional Casters
E) Backrest Assembly

Model 102-HD
BenchMaster w/toolbox
www.eidosergonomics.com
Warranty: Eidos products are covered by a
limited warranty for a period of ve years from
date of purchase.
*Online Product Registration :
http://www.eidosergonomics.com/product-registration.html
GS-07F-0033U
www.eidosergonomics.com
Eidos Corporation
4755 N. 48th Street, Lincoln,NE 68504
Telephone: [phone] FAX [phone]
E-mail: [email protected]
Web : www.eidosergonomics.com
Model 102-HD Replacement Parts List
C)-EIC-10203
102 STANDPIPE/GAS SPRING
A )-EIC-00062
MODEL 102 SEAT E )-EIC-06005W
102 BACKREST (Foam Only)
G )-EIC-06007B
BACKREST BRACKET
F )-EIC-10201
SEAT BACK UPRIGHT SUPPORT
D )-EIC-10202
102 5 POINT BASE
B )-EIC-06004-T
102 SEAT TILT RELEASE
MECHANISM
Hardware
1/4” x .20 x 1/2” Hex Head Bolt
(Seat Attachment(4) and Backrest
Bracket (2), Toolbox (6)Qty of 12
Total Needed.)
-EIC-10205
(Optional 3” Caster)
For More Information:
http://www.eidosergonomics.com/model102.html
1/4” LockNut (Upright Support to
Backrest Bracket) Qty of 1(EA).
1/4” .20 X 6” (Upright Support to
Backrest Bracket) Qty of 1(EA).
-EIS-10200
(Standard 3” Bell Glides)
H ) -EIC-10990
102-HDT TOOLBOX
I)-EIC-006TB
TOOLBOX SUPPORT