Gsertel Triton BRAIN User manual

BRAIN
User Guide
Version 6.0
triton
[email protected] | www.gsertel-triton.com
SMART SUPPLiES MANAGEMENT

The user interface is located on the front of the pedestal. It is congured by a screen and card reader,
located behind it.
You can see the following informaon in the home screen:
To read the card, place it over the screen horizontally
TRITON Brain User Guide
You can see your balance from the home screen approaching the card to the screen:
Navigaon buon
Informaon screen
Home Screen
Balance request
Gsertel 2 - TRITON
IPd: 10.10.1.12
Select device and tap
your ID card
Gsertel 2 - TRITON
IPd: 10.10.1.12
Remaining balance:
358.88€

TRITON Brain User Guide
Using the navigaon buon, go through the screens unl you reach the tap you want to open.
In the example, the selected tap is “WATER 1”, and as you can see in the screen, it is free, so you can open
it.
WATER: Open the tap
WATER 1: FREE
INSERT HOSE TO
CONTINUE
Once you have seledted the right tap, you can select the maximum amount of charge by long-pressing the
navigaon buon. Keep the buon hold unl you reach the desired amount.
MAXIMUM AMOUNT:
20 EUR
LIMIT:
250 EUR

TRITON Brain User Guide
Then approach your card to the screen. If the card balance is enough, the tap will be open. Otherwise, the
screen will show the message: “INSUFFICIENT BALANCE”.
If you select a tap that is being used at that moment, the screen will show the message: “OCCUPIED TAP”
Once the tap is open, the screen indicates that it is “IN USE”, as well as the card ID, the amount of water
consumed, and the starng balance:
WATER 1: IN USE
ID: D2F3F2D2
m3: 3.00
BALANCE: 442.52 EUR
WATER 1: (120 min.)
ID: D2F3F2D2
m3: 0.00
BALANCE: 442.52 EUR
It is possible that the device is congured with an inacvity meout. If that’s the case, the display will show
the ramaining me before the tap closes automacally if there is no consumpon:

To close an “IN USE” tap, you must approach the card to the screen again.
The tap status will become “FREE” again, and the screen wil show the remain balance.
WATER: Close the tap
WATER 1: FREE
INSERT HOSE
REMAINING BALANCE:
440.78 EUR
Using the navigaon buon, go through the screens unl you reach the socket you want to open.
In the example, the selected socket is “ENERGY 1”, and as you can see in the screen, it is free, so you can
open it.
ENERGY: Open the socket
ENERGY 1 : FREE
INSERT PLUG TO
CONTINUE
Note: when a socket belongs to a group (that is, when several sockets shaares a sigle meter), only one
socket of the group can be opened a me.
TRITON Brain User Guide

Once you have seledted the right socket, you can select the maximum amount of charge by long-pressing
the navigaon buon. Keep the buon hold unl you reach the desired amount.
MAXIMUM AMOUNT:
20 EUR
LIMIT:
250 EUR
If the pedestal has the plug detector enabled, you must insert the plug correctly before you can open the
socket. When the plug is detected correctly, the display will show this message:
ENERGY 1 : FREE
PLUG DETECTED
CORRECTLY
TRITON Brain User Guide

To close an “IN USE” SOCKET, you must approach the card to the screen again.
The SOCKET status will become “FREE” again, and the screen wil show the remain balance.
ENERGY: Close the tap
ENERGY 1 : FREE
INSERT PLUG
REMAINING BALANCE:
440.78 EUR
Touching the buon unl you get the last screen, you will nd the last operaon closed in the pedestal. It
shows the device, the consumpon and the key ID.
LAST OPERATION :
A1: 3,21 M3
ID: D60055B9
LAST OPERATION SCREEN
TRITON Brain User Guide

If you want to open a power outlet, you must ensure that the plug is posioned correctly.
If the system does not detect the plug correctly, the power outlet will not be opened for security reasons
Note 1. Electric Security
If the plug is unpplugged while the power outlet is open, the system will close the power outlet automa-
cally and the user will be expelled. So, the user must approach the card again to open the selected outlet
Note 2. The protecon
If there is a power outage while the outlet is open, when the supply recovers, the system will automacally
reconnect the outlet and keep in memory the user and the outlet that was open
Note 3. Automac reconnecon
In case that the pedestal losses the connecvity with the server, the pedestal will show intermiently the
message “NON NETWORKED” on the second line. Under this mode, only some operaons are allowed:
• Balance request: not available
• Device open request: only available for master keys and, if allowed by the harbouz authority, the
most frequent user on that pedestal.
• Device close operaon: all allowed
When the connecvity with the server is recovered, all the informaon of the oine operaons will be
send to the server.
Note 4. Oine Mode
LAST OPERATION :
A1: 3,21 M3
ID: D60055B9
TRITON Brain User Guide

Please, read carefully the messages shown in the screen. If you experience any problems,
contact the administrator of the port
Important
TRITON Brain User Guide