GSS SDIE 516 User manual

MANUAL
MULTISWITCH
SDIE 516
LNB INPUTS
LNB OUTPUTS
12V DC
T
V H V H
HIGH
LOW
T
V H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS

IMPORTANT INFORMATION ON SAFETY AND ASSEMBLY
TECHNICAL DESCRIPTION
- 2 -
This DOCS multiswitch SDIE 516 (DOCS = DIGITAL ONE CABLE SOLUTION)
is specially programmed to allow multi satellite reception at a GSS.lamina
or GSS.compact with SAT inputs. The multiswitch has 4 satellite inputs
universal satellite IF bands (VL, HL, VH, and HH) from a satellite feed and
can as cascade . The multiswitch SDIE 516 is powered by an external power
supply. Communication between the multiswitch SDIE 516 and the connected
head-end station is in accordance with EN 50607.
• Installation and service must be carried out by qualified electricians.
• Before starting, check the system for short circuits of coaxial cables.
• Before installation, disconnect the system from the mains (230 V).
• Mount the multi-switch ...
- on a fire retardant surface (wall),
- in a dust-free, dry environment,
- protected against moisture, vapors, splash water and moisture,
- in a place protected against direct sunlight,
- not in the immediate vicinity of heat sources,
• Pay attention to equal input levels of the SAT levels.
• Avoid short circuits!
• Damage due to incorrect connection and / or improper handling are
• excluded from any liability.
• Observe the relevant standards, regulations and guidelines for
• Installation and operation of antenna systems.
• The standards IEC / EN / DIN EN 61319-1, IEC / EN / DIN EN 60065
• and IEC / DIN EN 60728 must be complied with.
Electronic devices are not household waste, but must be disposed of
properly in accordance with Directive 2002/96 / EC of the EUROPEAN
PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste
electrical and electronic equipment (WEEE). Please dispose of this device
at the end of its use for disposal at the designated public collection points.
CE DECLARIATION
The manufacturer hereby declares (for address see backside of these user
manual) that the Multiswitch SDIE 516 are comply with the RED 2014/53/EU
nd RoHS 2011/65/EU directives. The full text of the CE declaration of confor-
mity is available on the Internet at the following link:
https://mygss.eu/Kopfstation/CD/CE/CE_SDIE516.pdf

CONNECTION PLAN
The small DOCS multiswitch SDIE 516 is housed in a rugged aluminum
die-cast case and is easy to cascade. The housing has integrated Potential
equalization and, with sufficient clearance, ensures good ventilation as
well as easy installation. The supplied power supply can be connected
directly to the multiswitch SDIE 516. High quality connections ensure
consistently high reception characteristics.
- 3 -
TECHNICAL DESCRIPTION
Use coaxial cables of high quality for the connections, which have been
developed for satellite reception and F connections and have a shielding
factor of min. have 90 dB.
LNB - INPUTS
Loop through outputs
DC IN
12 Volt
Establish Potential equalization (PA) according to IEC/EN/DIN
EN 60728. Connect the connections for PA compensation of the
multiswitch via a PA cable (Cu 5 mm²) to the on-site PA bar.
Output to
Head-end
Potential equalization
5 mm²
1
LNB INPUTS
LNB OUTPUTS
12V DC
T
V H V H
HIGH
LOW
TV H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS

- 4 -
CONNECTION PLAN
Connect the cables of the Quattro LNB to the inputs from multiswitch.
At Output you have 16 User bands for connection to a head-end input
available.
Unused outputs must be connected with galvanically isolated 75 Ω
Resistors (FTD 75).
1
Output to
Head-end
1
LNB INPUTS
LNB OUTPUTS
12V DC
T
V H V H
HIGH
LOW
T
V H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS

- 5 -
CONNECTION TO HEAD-END STATION
Select "Unicable II" in the input menu of the head-end station. The inputs
of the head-end are set to the Unicable frequencies of the multiswitch.
Thus, you can receive a satellite with 4 levels (VL, HL, VH, HH) for each
input to which you connect an DOCS multiswitch SDIE 516. 16 user bands
are available at output 1 (OUT 1).
Potential equalization rail
LNB INPUTS
LNB OUTPUTS
12V DC
TV H V H
HIGH
LOW
TV H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS
LNB INPUTS
LNB OUTPUTS
12V DC
TV H V H
HIGH
LOW
TV H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS
LNB INPUTS
LNB OUTPUTS
12V DC
TV H V H
HIGH
LOW
TV H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS
LNB INPUTS
LNB OUTPUTS
12V DC
TV H V H
HIGH
LOW
TV H V H
HIGH
LOW
OUT 1
16 UB
GSS Grundig Systems GmbH
Beuthener Straße 43
90471 Nürnberg - Germany
www.gss.de
SDIE 516
16 USER BANDS

UB FREQUENCY BANDWIDTH STANDARDS
UB 01 984 MHz 60 MHz (EN50607)
UB 02 1056 MHz 60 MHz (EN50607)
UB 03 1128 MHz 60 MHz (EN50607)
UB 04 1210 MHz 60 MHz (EN50494+EN50607)
UB 05 1292 MHz 60 MHz (EN50607)
UB 06 1364 MHz 60 MHz (EN50607)
UB 07 1458 MHz 60 MHz (EN50607)
UB 08 1530 MHz 60 MHz (EN50607)
UB 09 1602 MHz 60 MHz (EN50607)
UB 10 1680 MHz 60 MHz (EN50607)
UB 11 1752 MHz 60 MHz (EN50607)
UB 12 1824 MHz 60 MHz (EN50607)
UB 13 1896 MHz 60 MHz (EN50607)
UB 14 1968 MHz 60 MHz (EN50607)
UB 15 2040 MHz 60 MHz (EN50607)
UB 16 2112 MHz 60 MHz (EN50607)
- 6 -
USER BANDS PROGRAMMING
The DOCS multiswitch SDIE 516 has been specially programmed to allow
multisatellite reception on a
GSS.lamina or GSS.compact
head-end with SAT inputs.
The frequencies of the user bands are programmed to the input settings
of the Unicable II option of the head-end stations.
The following figure shows the factory-set values.
The following 16 user bands are available at output 1 (OUT 1) :

- 7 -
TECHNICAL SPECIFICATIONS
Eingangsanschlüsse /
Input Connectors
SAT
4 x ( VL, HL, VH, HH ) für / for 1 x Quattro LNC
TERR
1 x (UHF/VHF/DVB-T/DVB-T2)
DC 12V / 1 A
Eingangsfrequenz /
Input frequency range
SAT 950 - 2150 MHz
TERR 47 - 800 MHz
Eingangsimpedanz /
Input impedance
75 Ω (F-Typ)
Durchschleifausgänge /
Loop through connectors
SAT
4 ( V/L, H/L, V/H, H/H ) für / for 1 Quattro LNC
TERR 1
Ausgangfrequenz /
Output frequency range
SAT 950 - 2150 MHz
TERR 47 - 800 MHz
Ausgangsimpedanz /
Output impedance
75 Ω (F-Typ)
Durchschleifverlust /
Thru insertion loss
SAT 3 dB max.
TERR 4 dB max.
TAP Terrestrial Insertion loss 12 dB max.
TAP Satellite Gain 29 dB (Typ.)
HF Isolation:
RF isolation: TERR / SAT 25 dB min.
HF Isolation:
RF isolation: SAT / SAT 25 dB min.
Stromaufnahme /
Power consumption
300 mA max. @ 13.5 V DC max.
Betriebstemperatur /
Working temperature
-20° C … + 60° C
Abmessungen / Dimensions 110 x 110 x 21 mm
16 Benutzerfrequenzen / User bands
Anzahl der Benutzerfrequenzen /
Number of user bands

- 8 -
All information without guarantee. Changes and printing errors reserved. © by GSS Grundig Systems GmbH 04/2021
GSS Grundig Systems GmbH
Beuthener Strasse 43
90471 Nuremberg (Germany)
Phone:
Fax:
Contact:
[phone]
[phone]
www.gss.de [email protected]•
Service:
Phone:
Contact:
.
[phone]
[email protected]