GTCO CalComp InterWrite PRS Remote Clicker User manual

InterWrite PRS
Remote Clicker
User’s Guide

We at GTCO CalComp are proud of our InterWriteTM family of products. We strive to
continue to bring you the best the technology has to offer. We urge you to visit our Web
site, where we will post the latest information regarding any updates and changes we
have made that would impact the instructions in this Getting Started document.
www.gtcocalcomp.com
Support/InterWrite/Documentation Library
Support/InterWrite/Software Downloads

TABLE OF CONTENTS

OVERVIEW
Your PRS RF Clicker is part of the InterWrite PRS student response system. You will be using this RF Clicker
in your classes to respond electronically to questions.

Power
Switch
Enter/SendScroll Up
Scroll Down Cycle/Backspace
Menu Key
Decimal Point
True/False
Response Keys
Minus Sign
2-Line
LCD
Display
Numeric Keypad
Multiple Choice
Option Keys
Navigation Keys
Input Keys

Clicker Key Quick Reference
INPUT KEYS FUNCTION
Numeric Keypad Enter numeric Responses and numbered Multiple Choice Questions
Enter numeric values, i.e., Student ID and Question numbers
Decimal Point Enter a decimal point in a numeric Response
Press twice to enter a forward slash (/) for fractions
Minus Sign Enter to indicate a negative number
Multiple Choice/
Alpha Character Keys
Enter your Response Choice to a Multiple Choice Question
Switch to Alpha Mode
True/False Response Keys Enter Response to True/False Questions
Switch to Alpha Mode
Confidence Level Indicators When combined with a single-choice Multiple Choice Response,
or a True/False Response, = Low Confidence and = High Confidence

NAVIGATION KEYS FUNCTION
Scroll Up, Scroll Down Scroll Up and Scroll Down in Setup Menu (watch for the symbol)
Scroll through the alphabet when in Alpha Mode
Enter/Send Saves input values, e.g., Student ID
Sends Responses
Menu Key Stops Autoscan and displays Setup Menu
Cycle/Backspace Cycles through menu setting options when the is displayed in lower right
corner of LCD display, or
Goes up a Menu level when is in upper left corner of LCD display

First Time Users: You must enter your
Student ID before you can begin using your
PRS Clicker to transmit Responses.
1Press to display the Setup Menu.
2Scroll or to display the ID: menu
option and press .
3Input your Student ID. (See Setup
Menu on page __ if your Student ID
contains alpha characters.)
4Press to save your Student ID.
BASIC OPERATION
1Slide the Power Switch up to turn the RF
Clicker on.
Note that the initial screen displays the current
battery level in the lower right corner of the LCD
display. Your Clicker will then begin automatically
scanning for a Class to join.
2Scroll or , if necessary, to your Class and
press to join the Class.
You are now in Test Mode and ready to participate
in a PRS Session, or
2Press the Quick Jump number displayed on
the board to quickly find your Class. Press
to join the Class.

SETUP MENU
Use the Setup Menu to input your Student ID, set
operational modes and select a Test Mode. Note
the visual, navigation cues on the Setup Menu:
Scroll or to view additional Setup options
Press to view this Setup submenu
Cycle through settings, or cycle through menu
levels
Entering Alpha Characters:
1Press one of the letter keys (A through E, T, or F)
to display that alpha character on the display.
2Use the Keys to move to the letter you
want to input.
2Press to stop the Autoscan and display the
Setup Menu.