Guang Dong Xinbao IC3703 User manual

广
广广
广东
东东
东新
新新
新宝
宝宝
宝电
电电
电器
器器
器股
股股
股份
份份
份有
有有
有限
限限
限公
公公
公司
司司
司
Guangdong Xinbao ElectricalAppliances Holdings Co., LTD
产品说明书
产品说明书产品说明书
产品说明书
INSTRUCTION MANUAL
INSTRUCTION MANUALINSTRUCTION MANUAL
INSTRUCTION MANUAL
文件名称
文件名称文件名称
文件名称
DOCUMENT DESCRIPTION
DOCUMENT DESCRIPTIONDOCUMENT DESCRIPTION
DOCUMENT DESCRIPTION：
：：
： IC3703 电磁炉 UL
文件编号
文件编号文件编号
文件编号
FILE NO.
FILE NO.FILE NO.
FILE NO.：
：：
： 30- IM-
生效日期
生效日期生效日期
生效日期
EFFECTIVE DATE
EFFECTIVE DATEEFFECTIVE DATE
EFFECTIVE DATE：
：：
： 2007 年 6 月 11 日
版
版版
版 本
本本
本 号
号号
号
REV
REVREV
REV：
：：
： A
编制
编制编制
编制 Prepared
PreparedPrepared
Prepared by
by by
by：
：：
： 代
代代
代 兰
兰兰
兰 华
华华
华
审核
审核审核
审核 Checked
CheckedChecked
Checked by
by by
by：
：：
： 曾
曾曾
曾 永
永永
永 清
清清
清

Page 1 of 9
批准
批准批准
批准 Approved
ApprovedApproved
Approved by
by by
by：
：：
： 曾
曾曾
曾 永
永永
永 清
清清
清
INDUCTION COOKER
INSTRUCTION MANUAL
MODEL: IC3703
Read this booklet thoroughly before using and
save it for future reference.
Guang Dong Xinbao Electrical Appliances Holdings Co., LTD

Page 2 of 9
ADDRESS:ZHENGHE SOUTH ROAD, LELIU TOWN, SHUNDE DISTRICT,FOSHAN CITY, GUANGDONG PROVINCE, CHINA
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed
including the following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical shock do not immerse cord, plugs, or the unit in water or
other liquid.
4. Close supervision is necessary when any appliance is used by or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting
on or taking off parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions or has been damaged in any manner. Return appliance to the nearest
authorized service facility for examination, repair or adjustment.
7. The use of attachments not recommended by the appliance manufacturer may cause
injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.
10. Do not place the appliance near the hot gas or electric burner or other heated oven, for
this will cause fire.
11. Extreme caution must be used when moving an appliance containing hot oil or other
hot liquids.
12. To disconnect, turn any control to “Off”, remove plug from wall outlet. Always hold
the plug. But never pull the cord.
13. Do not use appliance for other than intended use.
14. Do not dismantle and refit parts or repair induction cooker yourself.
15. Do not contact with plug with wet hands
16. Place the unit on the stable table and keep at least 10cm distance between cooker
body and adjacent objects.
17. Never use the appliance at where is likely to subject to damp or close to fire.
18. Do not cook without load or overcook. Otherwise it will cause the cooker
deformation.
19. Metallic objects such as knife, forks, spoons, lids should not be placed on the hotplate
since they can get hot. Remove the cover before canned food is heated, to avoid the risk
resulting from heat expansion.
20. Do not let pins and metal wire and foreign objects into gas intake/vent.
21. Total weight containing using pan and loaded food shall not exceed 4kg, otherwise it
will damage and malfunction cooker body.
22. Continuous operation time shall not exceed 4h, if necessary please stop 30min during
operation period and then continue to use.
23. Do not use the appliance on carpet or tablecloth, otherwise it will jam gas intake.
24. After cooking, high temperature heat produced by pan will conduct onto the appliance,
never press the top hotplate immediately.
25. When not use, do not let cord remain being energized, during use high frequency
noise will be heard for it is resulted from metal materials of pan, it is not malfunction. If

Page 3 of 9
the pan is moved slightly, the noise will disappear, during use the running sound of fan
will be heard for the fan will rotate sometimes to reduce inner heat.
26. Do not place a sheet of paper between the pot or the pan and the unit. The paper may
get burnt.
27. Do not place near objects which are affected by magnet, such as: radios, televisions,
automatic-banking cards and cassette tapes.
28. Please use above 15A appropriate electrical outlet, never use all-purpose outlet and do
not use the appliance together with other appliance.
SAVE THIS INSTRUCTIONS
HOUSEHOLD USE ONLY
NOTES ON THE CORD PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk
of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not
fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
NOTES ON THE CORD
a) A short power-supply cord is to be provided to reduce risks resulting from becoming
entangled in or tripping over a long cord.
b) Longer extension cords are available and may be used if care is exercised in their use.
c) If a long extension cord is used,
1) The marked electrical rating of the extension cord should be at least as great as the
electrical rating of the appliance.
2) The longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a consumer
ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.

Page 4 of 9
PRODUCT ILLUSTRATION
Hot plate
Top cover
Control panel Bottom cover
CONTROL PANEL
Time
Function
FUNCTION INSTRUCTION
1. Press ON/OFF button to start the unit.
2. POWER function setting: press ON/OFF button first, LCD displays , it means entering
heating state, and power can be set by pressing “ ” or “ ” button to the following value: 400W-
600W- 800W- 1000W- 1200W- 1400W.
3. TEMP function setting: press FUNCTION button once, LCD displays , it means entering
warming state, and the warming temperature can be set by pressing “ ” or “ ” button to the
following value: 150℉ 200℉ 250℉ 300℉ 350℉ 400℉.
4. Timer function setting: on the state of POWER or TEMP, press TIME button once to enter timer
setting which is used for setting the time to shut off the power, at this time the LCD displays .
1) Within 5s press “ ” or “ ” button to set hour, the maximum set time is 23 hours and 59 minutes.
The “ ” and “ ” buttons can be hold down to scroll through the digits, or pressed and released to
advance one digit at a time.
Note: If the hour is not adjusted within 5s, the hour setting will be finished.
2) Following enter minute setting, and the minute set range is 0-59min. If the minute is not adjusted
within 5s, the minute setting will be finished.
3) Press the TIMER button to confirm the time, and buzzer sound “Bi” will be heard.
5. The unit will stop automatically when no any button is pressed within 2h.
1 4 0 0
POWER
W
4 0 0
TEMP
℉
0 0 00
TIME

Page 5 of 9
OPERATION
1. Insert power cord into separate appropriate socket, and buzzer sound “Bi” will be heard once, LCD
and all indictors light up for 1 second and then go out, LCD displays “- - - -”, indicating the unit is
energized.
2. Place the pan on the center of the hot plate. Press ON/OFF button, LCD displays “1 4 0 0”, then enter
POWER function, and at the time the fan starts running, the default power is 1400W, which can be
adjusted by pressing “ ” or “ ” button, the LCD displays “E0” if the pan is not placed in position
and buzzer sound “Bi” will be heard at an interval of 1 second. The appliance will return to the standby
state immediately if you place the pan in position within 5s, if you do not place the pan in position
within 5s, after 5s, the appliance will also return to the standby state.
3. Press FUNCTION button once to enter TEMP setting. The default temperature is 400°C, which can be
adjusted by pressing “ ” or “ ” button, when the temperature rises to the set value, the program will
enter the automatic protection.
Note: you can reset the function by pressing FUNCTION button at any time during operation.
4. On the state of POWER or TEMP, you can set the time to shut-off the power by pressing TIME
button.
1) After timing, power and time will cycle to display. You can adjust the power by pressing “ ” or
“ ” button.
2) After timing, press “ ” or “ ” button to adjust the temperature, temperature and time will cycle to
display.
Note: under timing shut-off state, the unit can be shut off by pressing ON/OFF button, after being shut
off, the timing shut-off setting will be cancelled, and at the next start the previous set time will not be
saved.
5. When time out, the unit will stop operating automatically and all indicators will be extinguished.
Note: the operation process can be terminated at any time by pressing the ON/OFF button. When
cooking program is ended the integrated cooling fan will continue running for 30 seconds.
6. After cooking, plug from the power outlet.
OPERATION PRINCIPLE
The operation principle of induction cooker is achieved by the current produced by magnetic field
induction which electron circuitry board produces alternate magnetic field, when the pan bottom
containing metal material is placed on the hotplate, the pan will immediately cut the alternate magnetic
field and then the metal part of pan bottom produces the current (whirlpool), it makes iron molecule run
irregularly at high speed, following the collision and friction between molecules produce heat energy

Page 6 of 9
which makes the appliance heat promptly, so that the purpose of cooking food is achieved.
PRODUCTADVANTAGE
1. High efficiency, saving energy and environmental protection: cooker body is heating part itself, so
heat efficiency is very high and save energy greatly, when cooking food with induction cooker, there is
be free of visible fire, smoke and waste gas, bear environment protection effect, safe and clean.
2. Wider applicable voltage range: the unit can adjust automatically the wattage according to the power
voltage, so that it avoids the trouble resulting from voltage fluctuation.
3. Perfect safety protection function: the unit has safe protection function for over voltage, lower voltage
or sudden voltage change. However normal over temperature function is quick and accurate.
4. Accurate and perfect inspection for pan quality and no-load protection function: the unit can inspect
whether the material or size of pan is applicable, when the pan is moved away, the unit stop heating
immediately and after 10s the power is cut off. No matter how the pan is moved away quickly or slowly,
no damage to induction cooker.
5. Start self-diagnosis function and 2h timing shut-off function: it can judge whether induction cooker
and operation are appropriate, that induction cooker is not operated for long time will be considered
being forgotten or outgoing, shut of the power automatically after 2h, so it make you use it safely
6. Multi-section wattage adjustment and multi-section temperature control: convenient and agile use, in
addition temperature control compensation feature make the set temperature more exact.
7. Multi-heating function: perform different cooking demand according to different power.
SAFETY PROTECTION EQUIPMENT
1. Over voltage protection and lower voltage protection
When power voltage is too high or low, induction cooker will compensate voltage automatically and
adjust output power.
2. Small metal part protection
For small iron metal which the diameter is less than 80mm, no power is outputted to avoid abnormal
heating.
3. No pan or improper pan protection
When no utensil is placed on the hotplate or the utensil is deviated greatly from the center, or the
material of the utensil is not applicable, the power will not be outputted and buzzer sound will be heard
to alert until appropriate utensil is put in place.
4. over temperature protection
When the temperature of top hotplate is too high, induction cooker will stop automatically power output
and long buzzer sound will be heard to alert until the temperature returns to normal.

Page 7 of 9
5. High voltage pulse protection
During operation, when power supply receives a transient high voltage pulse (such as lightning strike),
induction cooker will stop automatically and in a minute resume automatically.
COOKING UTENSILSELECTION
1. Useable pans
Steel or cast iron, enameled iron, stainless steel, which have round-bottom pans/pots with diameter
more than 18.5cm.
2. Non-usable pans
Heat-resistant glass, ceramic container, copper, aluminum pans/pots, which have flat or round-bottom
pans/pots with bottom measuring less than 18.5cm.

Page 8 of 9
CIRCUIT DIAGRAM
CARE AND MAINTENANCE
1. Please plug from power outlet before care and maintenance.
2. When ceramic hotplate is made dirty, wipe it with wet cloth, or after wipe it with detergent or
burnishing powder clean it with wet cloth.
3. Wipe unit body and control panel with soft and wet cloth, neutral cleanser may be used for firm oil
stain, then wipe the remained residue with soft and wet cloth.
4. Never rinse directly with water or immense it in water.
5. Keep the unit clean regularly to prevent black beetle entry into the fan so that the unit will fail, the
surface of gas intake and vent may be cleaned (such as dust, smear) with cotton bar, a little detergent
added on the toothbrush may be used for cleaning.
CONTRAST CHART OF THERMAL EFFICIENCY (based on 1l water)
Cooker type Time Gas(or electricity)
consumption Expense Thermal efficiency
Induction cooker 6.7min 0.2kw/h 0.140yuan 93%

Page 9 of 9
Gas cooker 8min 0.05kg 0.185yuan 50%
Electric cooker 12min 0.345kw/h 0.250yuan 47%
TROUBLE SHOOTING
If the problem is found during operation, please make the check according to the following table before
returning it to repair.
TROUBLE CHECKING POINT
Whether the plug is removal from the outlet.
Whether power switch or fuse in your home is cut off
When plug is inserted into the power
outlet, a beep sound will not be heard
and the indicator will not be lighted
when pressing POWER button Whether power is cut off
Whether the pan is proper
Whether the pan is centered on the hotplate
Continuous 15s beep sound will be
heard and then the unit stop operating. Whether the bottom diameter of the pan is more than 12cm
Whether ambient temperature is very high
Whether gas intake or vent is jammed
It means reaching the set temperature when the unit is at
TEMP state
The unit stops heating suddenly during
use
Protection equipment may operate confirm it after wait
several to 10 minutes
Whether the pan bottom is concavo-convex or the bottom
center is concave
The temperature can not be controlled
when frying or grilling food. Whether power indictor is lighted
The induction cooker will stop heating if have the following malfunction, after 3s,the display will show
the malfunction alarm, the malfunction code will showing on the center of display, you can clear the
display by pressing the switch button, and the appliance will enter the standby state.
Display Direction
E0 check the pan whether is in place
E1 the circuit is malfunction
E2 the temperature sensor is opening circuit or short circuit
E3 the voltage is higher (140V-160V)for 3s
E4 the voltage is lower (80V-100V) for 3s
E5 the cooker surface temperature is higher
E6 IGBT temperature is higher than 203℉for 3s
E7 the IGBT temperature sensor is opening circuit or short circuit