Guangdong Schen Investment RC-M2 User manual

Intelligent Controller
User Manual
Mode
Code
Direction
Schen.Intelligent Controller
M/A

Content
Content
Preface
Product structure
Structure diagram
Product Installation
Battery installation/change
Camera connection
Instructions
Display interface
Functions and setting
DSLR shutter cable
Product maintenance
Trouble shooting
Production information
Specification
Packing list
Warning

Preface
Main Character
Intelligent controller of Schen connected with turntable
serial products through Bluetooth, And connect with
camera through shutter cable. Then you can start to take
panoramic photo, and composite 3D image. Here two
operating model as below:
M(Manual)Model:
Control the shutter manually, then take pictures.
A(Automatic)Model:
Squeeze the shutter button, then camera will take pictures
automatically.
●Intelligent controller connected with turntable through
Bluetooth4.0 technology.
●Easy operation
●Master reset
●Support switch between manual and automatic model
●Completely compatible with below brand cameras:
Nikon/Canon/Pentax/Sony/Samsung/ Contax/ Minolta
Introduction

Product structure
M/A switch button
Mode switch button
Hot shoe
Fixed knob
Shutter Button
Shutter cable jack
1
2
3
4
5
6
Reset button
Switch
7
8
9
11
10
12
Code button
Hot shoe seat
Direction
switch button
Display screen
Structure diagram
ON/OFF
Reset
RC-M2
Mode
Code
Direction
Schen.Intelligent Controller
M/A
Mode
Code
Direction
Schen.Intelligent Controller
M/A

Mode Code
Direction
Schen.Intelligent Controller
M/A
1.Take down the battery cover based
on the direction of the allow on the
back cover.
2.Install the battery, make sure the
direction of the battery is correct. Finish
the battery installation, put on the back
cover for the battery.
1.Prepare to install the controller
Rotate the fixed screw to the top
point.
3. Tighten the controller for
fixed the screw
Follow the direction of the allow,
tighten the screw to the bottom, so
that can fix the controller
4.Connect with the shutter cable
Insert both sides of the shutter cable
into controller and camera.
Product installation
2.Install the controller
Follow the direction of allow, push the
hot shoe feet of the controller into the
hot shoe seat of the camera.
Battery installation/replacement
Connect with camera
Mode Code
Direction
Schen.Intelligent Controller
M/A
Mode Code
Direction
Schen.Intelligent Controller
M/A
Mode Code
Direction
Schen.Intelligent Controller
M/A

1.Switch
Turn on：
Turn on the switch
Turn off：
Turn off the switch
Switch
Reset
2.Reset
If need re-take pictures
when on manual model, pls
press reset button, then the
turntable will be automatic
return.
Instructions
ON/OFF Reset
2
3
4
1
5
6
7
8
Manual
Video
Automatic
Clockwise
(Icon flick when running )
Mode(18/36/72/Video)
Anticlockwise
(Icon flick when running)
Bluetooth connection
indication
Power display
Display screen
Function and setting

It is automatic operation with 18 pictures mode after diligent
controller connected with camera. And press the shutter button, it
will take 18 pictures with Clockwise rotation for a circle.（When
start to take pictures, the display screen will show you the remaining
numbers of pictures）.
4.The power on default mode is automatic operation
with 18 pictures.
3.Code: Intelligent Controller connected with turntable through
Bluetooth.
Turn on switch, and you can see the Bluetooth icon flick, then press
code button, so that controller can search by itself for matching with
the turntable. At the same time, the Bluetooth icon will be static.
(After turn on the switch, The product will be in misoperation mode before
connected with Schen turntable serial products, also all the buttons will be locked
and can’t be used; while if connected successfully, it will automatically unlock and
go back to normal.)
Instructions
Function and setting
Code buttonwhen the display screen
show 18, that means you
can take 18 pictures
Mode Code
Direction
Schen.Intelligent Controller
M/A

5.Mode switch: There are 2 filming modes
Photo mode:
Display screen shows the number of pictures 18/36/72, it will
take 18 pictures with Clockwise rotation for a circle.
Video mode:
Display screen shows 00, open the video mode, then the
turntable will start Synchronous rotation, and you can press
the shutter button for pausing when the turntable is working.
6.Turn direction:
You can switch the mode from clockwise rotation to
counter-clockwise rotation by pressing the direction switch
(you can see the turn icon on the right corner of the display screen).
Instructions
Function and setting
Mode switch
button
Direction
switch button
Mode Code
Direction
Schen.Intelligent Controller
M/A

7.Manual/Automatic:
You can switch manual or automatic mode by pressing A/M button.
When in automatic mode, the right corner of display screen will
show A, while M for manual mode.
Instructions
M/A switch
button
Function and setting
M(Manual)：
Turn on the intelligent controller and code, set in manual mode, a
nd press the shutter button when take pictures.(for example: when
choosing manual mode of 18 pictures, you need to press the
shutter button per time when take pictures.)
A(Automatic)：
Turn on the intelligent controller and code, set in automatic mode,
then press the shutter button for finish.(for example: when
choosing automatic mode of 18 pictures, you need to press the
shutter button for finishing the whole photography.)
Mode Code
Direction
Schen.Intelligent Controller
M/A

01cable suit for below modes：
Canon：70D、60D、700D、650D、600D、550D、500D、450D、400D、350D、300D、1100D、100D、
1000D、G10、G11、G12
Pentax：IST-D、IST-DL、IST K100D、K100DL、MZ-6、ZX-L、MZ-L、K7D、K10D、K20D、K100D、
K110D、K200D
Samsung：GX-1LGX-1S
Contax：N 645
02cable suit for below modes：
Canon：7D、6D、5D2、5D3、5D、50D、40D、30D、20D、10D、1D、1DX、1DsMark3、1DsMarkIV、
D60/30、1v EOS-1v、HS/EOS-3
03cable suit for below modes：
Sony：α100、α200、α300、α350、α700、α900
Minolta：Dynax 7D/5D、Dynax 9/7/5/4/3、Dynax 807Si/700Si/600Si/505Si
04cable suit for below modes：
Nikon：D800、D700、D300、D300S、D200、D100、N90S、D1series、D2series、D3、D3S、D3X、
D4、D200、D1H、D1X、D2、D2H、D2X、D2XS、D2HS、F5、F6、F90、F90X、F100
05cable suit for below modes：
Nikon：D80、D70S、D3000、D5000
06cable suit for below modes：
Nikon：D600、D610、D7100、D7000、D90、D5200、D5100、D5000、D3200、D3100
1.The shutter cable：
The shutter cable
port for controller is
standard 2.5mm, you
can choose the
suitable cable based
on your camera, Here
are 6 kinds of cables
for cameras.
plug for controller 6 kinds of frequently used shutter connector for cameras
Instructions
DSLR shutter cable
01 02 03
04 05 06

If any disfunction of the controller, Please refer to the
troubleshooting guide first. If not workable, Please contact
with our agency or our customer service center.
Product maintenance
1.Controller can’t control the turntable?
1.1Please check if connected Bluetooth successfully, after switch please press
code button for connecting Bluetooth.
2.Can’t turn on switch?
2.1change a new battery 2.2install the buttery in correct way
3.1change a new battery 3.2 re-switch
3.Display abnormal?
4.1re-switch 4.2change the battery 4.3 check if already coded
4.Button disfunction?
Trouble shooting

Production information
Package
Intelligent controller*1 user manual*1
DSLR shutter cable: Non standard(user can choose by yourself )
Type：Bluetooth connection
Battery：three AAA battery
continuous working period: around 80 hours(Three digititan battery)
Size：W70 mm×H60 mm×L80mm
Weight：about 103g(excluding battery)
Shutter connection：standard 2.5mm port
Specification

Warning
Do not disassembling or modifications done by
yourself
If any operation against warnings may cause electric shock or malfunction.
And If any damage caused by dropping or any other accident, please take
out the battery, and send out to maintenance point for repair.
In order to prevent damage to the product or to your
own or other people, Please read below safety guidelines,
and keep it so that whenever all users can read it.
Please Keep the product dry
Please do not operate with your wet hands, do not put the product in
water or rain when working. Or may cause fire or electric shock.
Please place the product out of the reach of
children
This product contains small parts such as that may cause suffocation if
swallowed by children.
Please do not expose the product in high
temperatures
Please do not leave the product in direct sunlight or expose it in high
temperatures, or may cause the product malfunction.
Battery safety
Do not mix of old and new batteries
Do not remove the battery or beware of short-circuit
To prevent damage for the product from battery leakage, Please
take out the battery when not using battery for an extended period.
If liquid leaking from the damaged battery contacts with skin or
clothes or gets into your eyes, do not rub your eyes. Wash them well
with clean water immediately.

FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for
help Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions
(1)this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation

The free services hotline