Guardian IPK-101 Operating and maintenance instructions

Installation steps: (PS/2 Application)
1. Power down your computer and IP-KVM.
2. Connect the VGA and PS/2 connectors of the
attached 3-in-1 Integrated Host Cable to the Host
computer.
3. Connect the 3-in-1 Integrated Adapting Cable to the
Local DB-15 connector of IP-KVM
4. Connect the monitor to the Adapting Cable.
5. Connect the keyboard to the Adapting Cable.
6. Connect the mouse to the Adapting Cable.
7. (Optional) Connect the USB connectors of USB
A-mini cable to the host computer and the IP-KVM
module while for remote mass storage control.
8. Connect one end of Ethernet cable to LAN1 or LAN 2
jack of IP-KVM, and the other end to the Remote
Console computer.
Set up a fixed IP:
1. Using PSetup to look for IP-KVM.
a) Click Refresh Devices button to detect connected
devices.
b) Select MAC address of the IP-KVM in “Device MAC
address” box. You can find the MAC address labeled
on the bottom side of the IP-KVM unit.
c) Click Query Device to find the IP configuration on
the right pane.
2. Setup “IP auto configuration” as “None” ; setup IP
address and Subnet mask
3. Enter Super user login and password for
Authentication (default : super/pass)
4. Click Setup Device. If super login was authenticated,
it’ll show “Successfully configured device”. Otherwise
it’ll show “Permission Denied”.
Quick Start Guide
KVM over IP
The IP-KVM package consists of the followings items:
9The IP-KVM unit
9CD-ROM (software utilities and User’s manual)
9Quick Start Guide
9DC power supply adapter
93-in-1 Integrated Adapting Local Cable
9USB A-mini cable
9Serial Cable (RJ45 to DB9F)
9Rack mounting kit (Brackets and screws)
9Footpads set
1. Package Checklist
3. Network Configuration
2. Hardware Installation
Default User Name: super
Default Password: pass
DHCP: Disable
Default IP address: 192.168.0.70
Default Net Mask: 255.255.255.0
There is a Network Setup Software utility (PSetup) for
setting up the network configuration (IP address, Subnet
mask, DHCP, etc). It is useful when you want to change
the network settings or you can not access to the unit
due to not knowing the network settings of the unit. In
this case, you can view or change the settings via this
utilit
y
.
IPK-101

Get an IP from DHCP server:
1. Setup “IP auto configuration” as “DHCP” ; setup IP
address and Subnet mask
2. Enter Super user login and password for
Authentication (default : super/pass)
3. Click Setup Device. If super login was authenticated,
it’ll show “Successfully configured device”.
4. Using PSetup to look for IP address.
a) Click Refresh Devices button to detect connected
devices.
b) Select MAC address of the IP-KVM in “Device MAC
address” box. You can find the MAC address labeled
on the bottom side of the IP-KVM unit. MAC address
is detected as connection from computer and IP-KVM
is valid through USB or network.
c) Click Query Device to find the IP configuration on
the right pane.
By knowing the IP address, now you can access to the
IP-KVM unit with a web browser. After passing the
authentication of user name and password, you can
access to the IP-KVM web server with web browser.
For instance, type the following in the URL field of your
browser when establishing an unsecured connection:
http://<IP address of IP-KVM>
When using a secure connection, type in:
https://<IP address of IP-KVM>
This will lead you to the IP-KVM login page as shown
below.
5. Opening and using Remote Console
4. Using Web Browser
1. To open the KVM console either click on the icon
Console or Remote Control > KVM Console of the
menu entry on the left or Click to open of the console
picture on the right.
2. Starting the Remote Console opens an additional
window. It displays the screen content of your host
system. The Remote Console will behave exactly in
the same way as if you were sitting locally in front of
the screen of your remote system.
3. The upper part of the Remote Console window
contains a control bar.
4. To open the Options menu, click on the button
“Options”.