Gude GHSF 570 Wiring diagram

GHSF 570
#94561
© Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - Deutschland
English GB
Translation of original operating instructions
HAND SNOW PLOUGH

1
A
3
2
4
2

Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
Making technical changes to improve the appliance as
part of the continuous product development reserved.
Translation of original operating instructions
Supply includes
Take the appliance out of the transport container and check
whether there are the following parts:
•Rounded handle
•Feed auger
•2 wing bolts
•2 bolts with nuts
•Operating Instructions and warranty certificate
If any parts are missing or are damaged, please contact
your dealer.
Appliance description
Snow is pushed out to the right when being moved by the
feed auger so applying much force is not needed.
Pic. A
1. Handle
2. Wing bolts
3. Bolts with nuts
4. Feed auger
Technical specifications
GHSF 570 hand snow plough #94561:
Operating width: 570 mm
Feed auger Ø: 180 mm
Assembly dimensions L x W x H: 600x250x1,125 mm
Weight: 3.9 kg
General safety instructions
The Operating Instructions must be read
thoroughly before using the appliance for the first time.
If there are any doubts regarding the appliance
connection and operation, please contact the
manufacturer (service department).
FOLLOW CAREFULLY THESE INSTRUCTIONS TO
PROVIDE A HIGH LEVEL OF SAFETY:
The manufacturer will not be liable for any unauthorised
changes to the appliance and injury to persons and material
damage caused as a result of such changes.
CAUTION!
•Make sure the appliance is stored in a safe way. An
appliance that is not used must be kept in a dry place.
•Watch out for any damaged parts. Check the
appliance before using it. Are any parts damaged?
Consider seriously whether the appliance can work
perfectly and safely if slightly damaged.
•Caution! Using accessory equipment and extensions
not explicitly recommended in these Operating
Instructions may result in putting persons and objects
at risk.
Use as designated
The hand snow plough has exclusively been designed to
remove snow from pavements, entrances and small to
medium-sized yards.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injury. Please be sure to know
that our appliances have not been designed for industrial
purposes.
Assembly (pic. A)
1. To connect the upper and bottom part of the handle,
insert the wing bolts (pic. A/2) in the appropriate holes.
2. Now insert the handle in the holes on the plough and
connect it with 2 bolts and nuts (pic. A/3) included in
the supply.
3. The hand snow plough is now ready to be operated.
Preparation and storing
•Before storing the appliance, clean it properly.
•Keep the appliance in a clean and dry place.
Marking:
Product safety:
Product corresponds to
appropriate EU standards
Commands:
General command sign Read the Operating Instructions before using
the appliance
Environment protection:
Dispose waste professionally
so as not to harm the
environment
Packing cardboard material
may be delivered to
collecting centres for
recycling
Any faulty and/or disposed
electric or electronic devices
must be delivered to
appropriate collection centres
Package:
Protect against moisture This side up
Caution - fragile Interseroh-Recycling
5

Technical specifications:
Ø
Feed auger Ø Operating width
Weight
EU DECLARATION ON CONFORMITY
The company
Güde GmbH & Co. KG
Birkichstrasse 6
D-74549 Wolpertshausen
Germany
hereby declares that the design and structure of the devices
listed below and in designs marketed conforms to
applicable basic requirements of the EU directives on safety
and hygiene.
This declaration on conformity becomes void in
case of a change to the device not consulted with
us.
Identification of the devices/ Order No.:
HAND SNOW PLOUGH / #94561
Date/signature of manufacturer: 18.03.2011
Information about signer: the executive
Mr Arnold
Technical documentation: J. Bürkle FBL; QS
Guarantee
The guarantee solely covers inadequacies caused by
material defect or manufacturing defect.
Original payment voucher with the sales date needs to be
submitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised use such
as appliance overloading, use of violence, damage as a
result of any unauthorised interference or caused by foreign
items. Failing to follow the operating and assembly
instructions and common wear are also not included in the
guarantee.
Emergency procedures
For reasons of potential injury, a first aid box according to
DIN 13164 must be available on workplace. Replenish
immediately material used from the first aid box.
If you require assistance, please give the following details:
Place of accident
Type of accident
Number of injured persons
Type of injury
Administer first aid according to injury and call for qualified
medical assistance. Protect injured person against other
injuries and keep him/her in rest.
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description of the
pictograms is given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their effect on environment and disposal
methods and can therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be
dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Operator requirements
The operator must carefully read the Operating Instructions
before using the appliance.
Qualification
No special qualification is necessary to use the appliance
apart from detailed instructions by an expert.
Training
Using the appliance only requires appropriate instructions
by an expert or reading the Operating Instructions. No
special training necessary.
Inspections and servicing
Never use aggressive cleaning agents to clean the
appliance. This could damage or destroy the appliance.
Service
Any technical questions? Complaint? Do you need
spare parts or operation manual?
Go to our website www.guede.com and the section
Service will help you quickly and without bureaucracy.
Please, help us to help you. In order to identify your device
in case of complaint, please indicate serial number, order
number and year of manufacture. All information is
available on the product label. To have all information
always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: [phone] / 700-360
Fax: [phone]
E-Mail: [email protected]m
6