guide craft Expressions G87105 User manual

For ages 2 and up. Adult assembly required.
! WARNING
Small parts and sharp points may be present
prior to assembly.
Care Instructions
To clean your product, use mild soap and
water on a damp cloth. Do not use window
cleaners or cleaning abrasives as they will
scratch the surface and could damage the
protective coating.
Customer Service
For questions regarding this product, or to
receive replacement or missing parts,
contact Customer Service at [phone].
Please have the model number and part
number(s) located in this Assembly
Instruction sheet available for reference.
Limited Warranty
This Guidecraft product is warranted to
the original purchaser at the time of
purchase and for a period of one (1)
year thereafter. In order to provide you
with timely assistance, please
thoroughly inspect your product for
missing or defective parts immediately
after opening the carton. To receive
replacement or missing parts under this
warranty, contact Customer Service.
You will also need your sales receipt or
other proof of purchase.
G87105, G87205, G87305
Expressions Trophy Rack
Assembly Instructions
Hardware and Parts
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
You will also need a Phillips-head
screwdriver (not included).
page 1 of 3
(18)
2
0.8"
(20mm)
1.2"
(28mm)
(10)
1
G
A
B
D
E
F
I
3(4)
1.6"
(40mm)

Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
STEP 1 STEP 2
STEP 3
page 2 of 3
B
B
CD
E
G
22
2
2
2
2
2
2
2
2
1
1
1
1
A
2
2
1
1
1
1
1
1
I
I
F
F
2
2
2
2
2
2

Step 1 - At the preferred height, find two
studs in the wall and mark the locations
for the wall mount (H). For best results
use a level to make sure it is not at an
angle. Secure the wall mount (H) with
Hardware 3.
NOTE: If studs cannot be found purchase
"Hollow-Wall Anchor Bolts" to attach the
wall mount.
page 3 of 3
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
Trophy Rack Instructions
ADULT ASSEMBLY IS NEEDED MOUNTING THE TROPHY RACK TO A WALL.
Wall
SIDE VIEW
Step 2 - Place the trophy rack on the
wall mount so that Part C nests into it.
Step 3 - Secure the trophy rack with
Hardware 3 through Part E into the
studs in the wall.
3
3
3
3
H
E