guide craft G97019 User manual

Hardware and Parts
Page 1 of 4
(24)
2"
(50mm)
123
C
D
D1
EF
I
H
H
H
H
K
K
K
G
J
L
L
B
A
For ages 3 and up. Adult assembly required.
! WARNING
Small parts and sharp points may be present
prior to assembly.
Care Instructions
To clean your product, use mild soap and
water on a damp cloth. Do not use window
cleaners or cleaning abrasives as they will
scratch the surface and could damage the
protective coating.
Customer Service
For questions regarding this product, or to
receive replacement or missing parts,
contact Customer Service at [phone].
Please have the model number and part
number(s) located in this Assembly
Instruction sheet available for reference.
Limited Warranty
All Guidecraft products are warranted to
the original purchaser at the time of
purchase and for a period of one (1)
year thereafter. In order to provide you
with timely assistance, please
thoroughly inspect your product for
missing or defective parts immediately
after opening the carton. To receive
replacement or missing parts under this
warranty, contact Customer Service.
You will also need your sales receipt or
other proof of purchase.
G97019
Corner Book Nook
Assembly Instructions
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
(6) (6)
4
You will also
need a Phillips-
head screwdriver
(not included).
(16)
C1 C2
C3
D2
D3
5(13)
1.4"
(35mm)

1
1
1
1
1
1
E
K
1
1
Page 2 of 4
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
I
F
G
K
L
J
K
STEP 1 STEP 2
STEP 3 STEP 4
L

1
1
1
1
5
5
555
5
5
D
Page 3 of 4
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
D2
D3
D1
D
STEP 5 STEP 6
STEP 7 STEP 8
EB
1
1
1
1
B
A
1
1
1
1
1
F
1
1
1

2
2
2
2
2
2
5
5555
5
Page 4 of 4
H
H
H
H
Guidecraft • 55509 Highway 19 West, Winthrop, MN 55396 • [phone] • www.guidecraft.com
C
C
3
3
3
3
3
C1
C2
C3
C
3
STEP 9 STEP 10
STEP 11 STEP 12
Hardware Instructions
Place cam lock (3)
in the appropriate
hole located as shown.
Using a philips-head
screwdriver, screw
in cam pin (2).
After joining cam pin (2)
and cam lock (3),
tighten cam lock (3)
with a philips-head
screwdriver for secure
assembly.
54