Furniture of America CM7057Q User manual

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer
(#D) onto bolts (#C). Align legs (#5) to the bottom holes of the headboard
(#1) and footboard (#3), then secure with bolts (#C).
Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#A).
Screw bolts (#A) half way into the holes of the headboard (#1) and footboard (#3). Rest the side
rails (#2) onto bolts (#A) and secure with bolts (#A).

Prepare 4 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#B). Align
support legs (#7) to the holes of the support slat (#4), then secure with bolts (#B).
Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#B). Align the support slats (#4) to
the holes of the headboard (#1) and footboard (#3). Secure with bolts (#B).

Attach a center connector (#F) in-between 2 slats (#6) and a end cap (#G) to the end of the slats
(#6) as shown in the picture. Attach the slats (#6) with connectors (#F,G) onto the support slats and
side rails (#2).
Attach cable A (#I) or cable B (#J) to the hole
and device.
Attach power line (#K) to the outlet and hole.

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer
(#D) onto bolts (#C). Align legs (#5) to the bottom holes of the headboard
(#1) and footboard (#3), then secure with bolts (#C).
Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#A). Screw bolts (#A)
half way into the holes of the headboard (#1) and footboard (#3). Rest the side rails (#2) onto bolts (#A) and
secure with bolts (#A).

Prepare 4 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#B).
Align support legs (#7) to the holes of the support slat (#4), then secure with bolts (#B).
Prepare 8 bolts assembly by inserting lock washer (#E), then flat washer (#D) onto bolts (#B). Align the
support slats (#4) to the holes of the headboard (#1) and footboard (#3). Secure with bolts (#B).

Attach two center connectors (#F) in-between 3 slats (#6) and two end caps (#G) to the end of the slats
(#6) as shown in the picture. Attach the slats (#6) with connectors (#F,G) onto the support slats and side
rails (#2).
Attach cable A (#I) or cable B (#J) to the hole and
device.
Attach power line (#K) to the outlet and hole.

For more information contact our team: [email protected]

Prepare 8 bolts assembly by inserting lock washer (#D), then flat washer (#C)
onto bolts (#B). Align legs (#4) to the bottom holes of the headboard (#1) and
footboard (#3), then secure with bolts (#B).
Prepare 8 bolts assembly by inserting lock washer
(#D), then flat washer (#C) onto bolts (#A). Screw
bolts (#A) half way into the holes of the headboard
(#1) and footboard (#3). Rest the side rails (#2) onto
bolts (#A) and secure with bolts (#A).

Attach end caps (#E) to the end of each slats (#5). Then attach the slats to the side rails (#2).
Attach cable A (#G) or cable B (#H) to
the hole and device.
Attach power line (#I) to the outlet and hole.