GFW AMALFI User manual

Thank you for purchasing the .AMALFI 5 DRAWER GLASS TALLBOY
Please read the instructions carefully to ensure safe operation of the product.
Size: 640*400*860mm
AMALFI 5 DRAWER GLASS TALLBOY
Page 1 of 3
Colour: GREY \ WHITE

ASSEMBLY INSTRUCTIONS
AMALFI 5 DRAWER GLASS TALLBOY
Page 2 of 3
Due to the size of this product we recommend that it is assembled in the room intended for use
When you are ready to start, make sure that you have the right tools, plenty of space and a clean,
dry area for assembly.
Check the pack and make sure you have all the parts listed.
Ensure that this product is fully assembled as illustrated before use.
Tools not included.
To clean wipe with a sponge with warm soapy water.Do not use solvent based cleaners
or detergents as they can bleach or damage the product.
Never use scourers,abrasive s or chemical cleaners.
This product should only be used on firm, level ground.
Keep small parts out of reach of children.
Make sure the legs remain in contact with the ground.
Do not use power tools to construct this product.
Do not place hot item directly into the surface of the cabinet.
Always use a heat resistant protective mat.
Do not use this product if parts are missing, damaged or worn.
Do not sit or stand on the product.
INFORMATION
WARNINGS
CARE INFORMATION
We recommend the use of the wall fixings provided for safety reasons
N.B If in doubt please consult a qualified tradesperson。Warning：Always ensure the area
to be drilled is free from hidden electrical wires,water and gas popes.
It is essential that this unit is fixed to a wall with the fixings

Page 3 of 3