Guild CSD36G2 User guide

Original Instruction Manual
After Sales Support
CSD36G2
GUILD
3.6V Lithium-Ion Screwdriver
Important - Please read these instructions fully before operating or maintaining your Guild Lithium-Ion Screwdriver
These instructions contain important information that will help you get the best from your Guild
Lithium-Ion screwdriver, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
UK/Ireland 0333 3201989
[e-mail]

Customer Helpline 0333 3201989
2
Contents
Safety Information............................................................................................3
In The Box.........................................................................................................8
Accessories.......................................................................................................8
Operating Instructions.....................................................................................9
Maintenance...................................................................................................11
Technical Data................................................................................................11
Environmental Protection...............................................................................12
Guarantee.......................................................................................................13

Customer Helpline 0333 3201989
3
To reduce the risk of injury. Please read
the instruction manual
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Double insulation
Indoor use only
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
The following warning symbols appear
throughout this assembly manual and
indicate the appropriate safety measures
you should take when assembling and
operating the Lithium-Ion Screwdriver.

Customer Helpline 0333 3201989
4
Safety Information
Important - Please read these instructions fully before starting assembly
Warning Symbols
Do not expose to rain or water
Do not burn
Li-Ion battery. This product has been
marked with a symbol relating to
‘separate collection’ for all battery packs
and battery pack. It will then be recycled
or dismantled in order to reduce the
impact on the environment. Battery packs
can be hazardous for the environment
and for human health since they contain
hazardous substances.
Fuse
T 0.2 A time lag fuse with rated current of
0.2 A
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your local authorities or retailer for
recycling advice.
Li-I on
Li-Ion

Customer Helpline 0333 3201989
5
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings
refers to your mains-operated (corded)
power tool or battery-operated (cordless)
power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
Safety Information
General Power Tool Safety Warnings
Original Instructions
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
6
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified
plugs and matching outlets will reduce
risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use. Use of a cord suitable for
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
7
outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power
tool while you are tired or under
the influence of drugs, alcohol or
medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
8
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on
the switch or energising power tools that
have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A wrench
or a key left attached to a rotating part
of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better
control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
9
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
10
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
g) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack may
create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated battery packs. Use of any other
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
11
battery packs may create a risk of injury
and fire.
c) When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together
may cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
6) Service
Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
Safety Information
General Power Tool Safety Warnings
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
12
1.Hold power tool by insulated gripping
surfaces, when performing an operation
where the fastener may contact hidden
wiring. Fasteners contacting a “live”
wire may make exposed metal parts of
the power tool “live” and could give the
operator an electric shock.
a)Do not dismantle, open or shred cells.
b)Do not short-circuit charging terminal.
Do not store power tool haphazardly in a
box or drawer where charging terminal
may short-circuit each other or be
short-circuited by conductive materials.
When power tool is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one charging terminal to
another.
c) Do not expose power tool to heat or fire.
Avoid storage in direct sunlight.
d)Do not subject power tool to mechanical
shock.
Screw Driver Safety Warning
Safety Warnings For Battery Cells Inside The Tool
Safety Information
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
13
Safety Warnings For Battery Cells Inside The Tool
Safety Warnings For Battery Cells Inside The Tool
e)In the event of battery leaking, do not
allow the liquid to come into contact
with the skin or eyes. If contact has
been made, wash the affected area with
copious amounts of water and seek
medical advice.
f) Seek medical advice immediately if a cell
has been swallowed.
g)Keep power tool clean and dry.
h)Wipe the charging terminals with a clean
dry cloth if they become dirty.
i) Power tool needs to be charged before
use. Always refer to this instruction and
use the correct charging procedure.
j) Do not maintain power tool on charge
when not in use.
k)After extended periods of storage, it may
be necessary to charge and discharge
the power tool several times to obtain
maximum performance.
l) Battery gives its best performance
when it is operated at normal room
temperature (20 °C ± 5 °C).
m)When disposing of cells, keep cells
Safety Information
Important - Please read these instructions fully before starting assembly

Customer Helpline 0333 3201989
14
of different electrochemical systems
separate from each other.
n)Recharge only with the charger specified
by GUIDE. Do not use any charger other
than that specifically provided for use with
the equipment. A charger that is suitable
for one type of battery may create a risk of
fire when used with another battery.
o)Keep power tool out of the reach of
children.
p)Retain the original product literature for
future reference.
q)Dispose of properly.
WARNING Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
This appliance can be used by children
aged from 8 years and above and persons
Screw Driver Safety Warning
Safety Information
Important - Please read these instructions fully before starting assembly
General Safety Warnings

Customer Helpline 0333 3201989
15
Safety Information
Important - Please read these instructions fully before starting assembly
General Safety Warnings
Additional Safety Instructions For Your Battery Charger
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given supervision
or instruction concerning use of the appliance
in a safe way and understand the hazards
involved. Children shall not play with the
appliance. Cleaning and user maintenance
shall not be made by children without
supervision.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
1. Before charging, read the instructions.
2. After charging, disconnect the battery
charger from the supply mains. Then
remove the chassis connection and then
the battery connection.
3. Do not charge a leaking battery.
4. Do not use chargers for functions other
than those for which they are designed.
5. Before charging, ensure your charger is
matching the local AC supply.

Customer Helpline 0333 3201989
16
Safety Information
Important - Please read these instructions fully before starting assembly
Additional Safety Instructions For Your Battery Charger
6. For indoor use, or do not expose to rain.
7. The charging device must be protected
from moisture.
8. Do not use the charging device in the open.
9. Do not short out the contacts of battery or
charger.
10.Respect the polarity “+/-“ when charging.
11.Do not open the unit and keep out of the
reach of children.
12.Do not charge the batteries of other
manufactures or ill-suited models.
13.Ensure that the connection between the
battery charger and battery is correctly
positioned and is not obstructed by foreign
bodies.
14.Keep battery charger’s slots are free of
foreign objects and protect against dirt
and humidity. Store in a dry and frost-free
place.
15.When charging batteries, ensure that the
battery charger is in a well-ventilated area
and away from inflammable materials.
Batteries can get hot during charging.
Do not overcharge any batteries. Ensure

Customer Helpline 0333 3201989
17
Safety Information
Important - Please read these instructions fully before starting assembly
Additional Safety Instructions For Your Battery Charger
that batteries and chargers are not left
unsupervised during charging.
16.Do not recharge non-rechargeable
batteries, as they can overheat and break.
17.Longer life and better performance can be
obtained if the battery pack is charged when
the air temperature is between 18°C and
24°C. Do not charge the battery pack in air
temperatures below 4.5°C, or above 40.5°C.
This is important as it can prevent serious
damage to the battery pack.
18.Charge only battery pack of the same
model provided by GUIDE and of models
recommended by GUIDE.

Customer Helpline 0333 3201989
18
In The Box
Parts
1 5
26
37
4
Forward/Reverse Rotating Control
Charging Socket
Charging Indicator
Chuck
Sight Light
On / Off Switch
Soft Grip Handle
3
25
6
4
1
7
Accessories
50mm PZ2 bit 1pc
Charger 1pc

Customer Helpline 0333 3201989
19
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
This tool is intended for driving in and loosening screws.
BEFORE PUTTING INTO OPERATION
1. CHARGING THE BATTERY(SEE FIG A)
NOTE:
a) Do not use any charger other than that specifically provided for use with the equipment.
b) If the battery pack is very hot you must remove your battery pack from the charger and
allow time for the battery to cool down before recharging.
c) The battery in your new tool is not charged when it leaves the plant. Therefore it must
be full charged before using the first time.
d) Please charge the battery to reach full or no less than half charge before storage. If the
tool will not be used for long periods of time, charge the battery every 3-6 months.
Plug the charger plug into a suitable power outlet. Next, connect the DC plug to the
Charging Socket (6). When charging is completed, unplug the charging, disconnect the
Charger from the screwdriver. The screwdriver is ready to be used
IMPORTANT: When charging, the charger and screwdriver may become warm to the
touch, this is normal and does not indicate a problem.
WARNING: When battery charge runs out after continuous use or exposure to
direct sunlight or heat, allow time for the tool to cool down before re-charging to
achieve the full charge.
CHARGING INDICATOR
Light Status
red on Charging
green on Fully Charged
Operating Instructions
Power
outlet
Charger
plug
A

Customer Helpline 0333 3201989
20
OPERATION
1. FITTING AND REMOVING BITS (SEE FIG B)
Insert the bit into the bit holder and push the bit into the chuck as far as possible. To
remove the bit, simply pull it out of the bit holder.
WARNING: Do not suggest to use screw bit shorter then 25mm. When insert into
the bit holder, it is difficult to pull it out.
2. FORWARD/REVERSE SWITCH (SEE FIG C1 C2)
For screw driving use forward rotation marked “ ” (lever is moved to the left). Only
use reverse rotation marked “ ” (lever is moved to the right) to remove screws or
release a jammed drill bit.
WARNING: Never change the direction of rotation when the chuck is rotating.
Wait until it has stopped.
3. SWITCH LOCK (SEE FIG D)
The On/Off switch trigger can be locked in OFF position. This helps to reduce the
possibility of accidental starting when not in use. To lock the switch, place the forward
and reverse rotation selector in the center position.
Bit
B C1
C2 D
Operating Instructions