Gumdrop SlimTech User manual

INSTALLATION
2
Pop on the side clips. Make sure the keyboard is
flush against the front edge of the bottom case.
3
Carefully press the rear corner clips to snap
onto the keyboard.
4
Align the device screen under the top case’s
side clips on both sides.
5
Slide the top case down, to secure the screen
behind the side clips, until the device reaches
the case’s top edge.
1
Align the device keyboard under the bottom
case’s front clips on both sides.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
Congratulations on your new case!
GumdropCases.com SlimTech Lenovo Yoga 11e 6th Gen
7
Close the case and press on the clips located
on the bottom of the top case. Make sure the
clips are securely attached.

REMOVAL
CRITICAL!
FOLLOW STEPS 1 - 3 IN ORDER
Failure to do so may result in
damage to the device.
1
Unhook the 3 clips located on the top case’s
bottom, near the spine.
2
Push the lower le and right side clips
outward to release the bottom of the top
case from the device.
4
Gently push the rear clips down to unhook
from the device.
The bottom shell can be recycled if
the feet are removed!
3
Start sliding the top case off by pushing up
with your fingers on the bottom corners.
GumdropCases.com SlimTech Lenovo Yoga 11e 6th Gen
5
Push the le and right side clips down
past the device, one side at a time, to
release it from the bottom case.