Gumdrop SlimTech Dell Latitude 13 5300 User manual

INSTALLATION
2
Push the keyboard forward until it is flush
with the front edge of the bottom case.
3
Carefully press the rear corner clips to snap
onto the keyboard.
4
Hinge the top case’s top interior onto the device
screen. Rotate the case towards the back.
5
Press the upper side clips over the device, with
pressure from both sides, to snap into place
securely.
1
Align the device keyboard under the
bottom case’s side clips on both sides.
6
Repeat step 5 with the lower side clips.
Congratulations on your new case!
GumdropCases.com

REMOVAL
CRITICAL!
FOLLOW STEPS 1 AND 2 IN ORDER
Failure to do so may result in
damage to the device.
1
Push the lower le and right side clips
outward to release the bottom of the top
case from the device.
4
Push the le and right side clips down
past the device, one side at a time, to
release it from the bottom case.
The bottom shell can be recycled if
the feet are removed!
3
Gently push the rear clips down to unhook
from the device.
GumdropCases.com
2
Push the upper le and right side clips
outward to remove the top case from the
device.