
3
77107
Ultrasonic Cleaner
2
Specification
Power supply AC220-240v 50Hz
Power 50 +/- 10w
Dimensions 228 x 183 x 158mm
Tank size 1300ml
Frequency 40 KHz
Weight 2.15kg
Instructions For Use
1. Open lid and fill the Stainless Steel tank with water
2. Observe maximum and minimum levels
3. Immerse article into tank
4. Plug in the cleaner to the mains supply and switch ON
5. Press the SET button to select the time (180sec is most popular)
6. By pressing the SET button the 5 options will appear
7. Press ON to start cleaning (blue light will appear)
8. An audible sound will show the cleaner is working
9. The cleaner will stop when 000 is reached and the blue light will go out
10. If you need to stop during the programme, press the OFF button and ON again to continue
11. If repeat cleaning is required repeat the steps above
12. When job is complete unplug cleaner, lift the lid and remove article
13. Pour out the water and dry tank ready for next use
Please read all instructions before use.
Precautions
• Unplug from mains supply when not in use
• Keep cleaner on dry level surface and away from direct heat
• Do not leave unattended when in use
• Do not immerse the cleaner in water
• Only immerse waterproof items into the tank for cleaning
• Do not use with tortoiseshell
• Do not fill the tank with corrosive chemicals
• Do not attempt to dismantle
• Do not keep full of water when not in use
• Dry out with soft cloth after use
• Do not switch on with no water in the tank
Suitable for use on:
Jewellery Necklaces, rings, earrings, bracelets, watch
chains, waterproof watches
Glasses Spectacles, sunglasses
Toiletries Electric shaver heads, razor blades, dentures,
combs, toothbrushes
Stationery Pen tips, printer heads, inkjet cartridges,
seals etc
Metal objects Watch parts, ancient coins, badges, machine
nozzles, spark plugs
Motor parts Small items from engines etc including spark
plugs, diesel injectors, carburettor parts etc.
Cutlery Forks, knives, spoons etc.