Gurin BPM165W User manual

Thanks for choosing the Digital Blood Pressure Monitor.
Please read this instruction manual before using your unit.
Please keep this instruction manual safe for future use.
Fully Automatic Wrist Style
Digital Blood Pressure Monitor
Instruction Manual
Lead a Healthy Life...
START/STOP
BPM165W
SET
MEM
Introduction................................................................................................1
Symbols Use..............................................................................................2
Important Safety Notes..............................................................................3
Konw Your Unit.......................................................................................4-5
IHB Introduction.........................................................................................6
Before Taking A Measurement...................................................................7
Battery lnstallation/Replacement............................................................8-9
Adjusting Settings
1. To set year ......................................................................................10
2. To set date and time ........................................................................11
3. To set unit ........................................................................................12
Proper Way of Measurement ...................................................................13
Take a Measurement ..........................................................................14-15
Use the Memory Function
To read the average value ...................................................................16
To read the measurement value ..........................................................17
To delete the memory value .................................................................18
Before Using the Monitor
Care and Maintenance
Operating Instructions
Table of Contents
About Blood Pressure
Blood Circulation ..................................................................................19
Health and Blood Pressure ..................................................................20
Classification of Blood Pressure .....................................................21-22
Exceptional Situations
Error Indicators ....................................................................................23
Eliminate Fault .....................................................................................24
Care and Maintenance
Care .....................................................................................................25
Maintenance ........................................................................................26
Specifications .....................................................................................27-28
Statement ................................................................................................29
Warranty Information ..........................................................................30-31
Table of Contents
VER:A00
Distributor:
Model No.:
Model No.:
BPM165W
BPM165W

START/STOP
BPM165W
SET
MEM
Body & Cuff
4
Know Your Unit
Setting Button
Start/Stop Button
Memory Button
Display
Battery Compartment Wrist Cuff
1
Introduction
The unit uses the oscillometric method of blood pressure measurement. It
means the unit detects the movement of your blood through your brachial
artery, and converts your blood pressure into a digital reading. The unit is
simple to use because a stethoscope is not needed while using an
oscillometric monitor.
The unit stores automatically 90 sets of measurement values with the
measuring date and time. You can read the stored data conveniently by
pressing the memory button.
The unit comes with the following components:
• Main Unit
• Storage Case
• Instruction Manual printed in English
2
Symbols Use
Indicates a potentially hazardous situation
Type B applied part
Refer to instruction manual/booklet
MANUFACTURER
SERIAL NUMBER
The marking of electrical and electronics devices
according to Directive 2002/96/EC.
The device,accessories and the packaging have to be disposed
of waste correctly at the end of the usage.
Please follow Local Ordinances or Regulations for disposal.
AUTHORISED REPRESENTATIVE IN THE
EUROPEAN COMMUNITY
which, if not
avoided, could result in death or serious injury.
SYMBOLS USED IN THIS INSTRUCTION MANUAL
WARNING
CAUTION Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury to the user or
patient or damage to the equipment or other property.
Important Safety Notes
Read all information in the instruction manual and any other
literature included in the box before using the unit.
Contact your physician for specific information about your blood pressure.
Self-diagnosis and treatment using measured results may be dangerous.Follow
the instructions of your healthcare provider.
Operate the unit only as intended. Don't use for any other purpose.
The unit is intended to use in measuring blood pressure and pulse rate for adult
only, not recommended for neonatal baby at home or medical centre.
Do not use a cellular phone near the unit. It may result in operational failure.
Please avoid using in high radiant area in order to make your measuring data
correctly.
Do not disassemble or attempt to repair the unit or components.
Do not use the equipment where flammable gas (such as anesthetic gas,
oxygen or hydrogen) or flammable liquid (such as alcohol) are present.
To assure the correct use of the product basic safety measures
should always be followed including the precautions listed below:
3

START/STOP
BPM165W
SET
MEM
START/STOP
SET
MEM
BPM165W
+
+
-
-
Battery Installation / Replacement
1
Remove the battery cover from the
battery compartment.
2
8
Install 2 “AAA” size batteries so the + (positive)
and - (negative) polarities match the polarities
of the battery compartment as indicated.
2 AAAAlkaline
Batteries
Power
Display
Storage Case
Unit lndication
Systolic Blood
Pressure
Diastolic Blood
Pressure
Heartbeat Symbol
Pulse
Memory & Times
Irregular Heartbeat
Symbol
Low Battery Symbol
Average Value Symbol
Date/Time
5
Know Your Unit
Inflation/Deflation Symbol
or WHO Indication
1.Avoid eating,drinking alcohol, smoking, exercising and bathing for
30 minutes before taking a measurement.
2.Stress raises blood pressure.Avoid taking measurements during
stressful times.
3.The cuff can be applied to your left or right wrist.Always measure
your blood pressure on the same wrist.
4.Measurements should be taken in a quiet place.
5.Position the unit at heart level throughout the measurement.
6.Remain still and do not talk during the measurement.
7.Keep a record of your blood pressure and pulse readings for your
physician.A single measurement does not provide an accurate
indication of your true blood pressure.You need to take and record
several readings over a period of time.Try to measure your blood
pressure at the same time each day for consistency.
8.Wait 30~60 seconds between measurements.The wait time allows
the arteries to return to the condition prior to taking the blood
pressure measurement.You may need to increase the wait time
depending on your individual physiological characteristics.
7
Before Taking A Measurement
When the unit detects an irregular rhythm two or more times during the
measurement, the Irregular Heartbeat Symbol will appear on the
display with the measurement values.
An irregular heartbeat rhythm is
defined as a rhythm that is more
than 25% slower or 25% faster
from the average rhythm detected
while the monitor is measuring the
systolic blood pressure and the
diastolic blood pressure.
If the Irregular Heartbeat Symbol ( ) displays with your measurement
results, we recommend you consult your physician.
Follow the directions of your doctor.
6
IHB Introduction
Normal Heartbeat
Irregular Heartbeat
Pulse
Blood
pressure
Pulse
Blood
pressure
Short Long
Irregular Heartbeat Symbol ( )

Day SettingMonth Setting
Minute SettingHour Setting
Press the “MEM” button to change the month and press the “SET” button and
continue with next step. Then set the day, the hour and the minute by using
the same way. Continue with step 3.
Adjusting Settings
11
2. To set date and time 3. To set unit
Then press the “MEM” button to change the current unit. (kPa or mmHg)
P ress the “SET” button and return to the step 1.
Press the “Start/Stop” button to save the current setting and turn off.
Adjusting Settings
12
You can stop the setting anytime when you press the “Start/Stop”
button to save the current setting and turn off.
MEM
SET
Start/Stop
BPM165W
MEM
SET
Start/Stop
BPM165W
START/STOP
SET
MEM
BPM165W
Replace the battery cover.
Caution!
3
Battery Installation / Replacement
9
Use two identical 1.5V alkaline batteries type
AAA/LR03.
Do not use rechargeable batteries.
Replace both of the batteries if the symbol of
low battery appears on the display.
Never leave any low battery in the battery
compartment since they may leak and cause
damage to the unit. The year can be set between 2009 and 2030, and it will return to 2009
when the display of year up to 2030.
1.2 The mark of year appears and flashes after press the “SET” button
for 3
~ 4 seconds ,while the unit is off .Finally, press the “SET” button
again and continue with step 2.
Then press the “MEM” button one time for increasing one year,twice for
two years, so on and so forth. Long press the “MEM” button and the
value quickly increases.
1.1 All information will appear on the display when the batteries are installed
at the first time.After 2 seconds the year flashes on the display. Finally,
press the “SET” button and continue with step 2.
Adjusting Settings
10
1. To set year
SYS
mmHg
DIA
mmHg
/min
PUL
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL

The unit stores the blood pressure and pulse rate in the memory
after completing a measurement every time. It can automatically
store 90 sets measurement values .The earliest record is deleted
to save the latest measurement value when more than 90 sets.
The unit also calculates an average reading based on the values
of the latest 3 times measurement taken.
15
Take a Measurement
Press the “Start/Stop” button to turn off the unit.
4
The cuff is deflated automatically,
and the measurement results are
stored in memory with date and
time
The symbol will be displayed
if
irregular heartbeat is deteced.
The blood pressure and pulse rate are displayed when the
measurement completed.
3
OR
OR
.......
Turn to next
The unit will automatically turn off after two
minutes if you have forgotten to turn it off.
NOTE:
To stop the inflation or measurement any time, press the
“Start/Stop” button. The unit will stop inflating and then
release and turn off.
Press the “MEM” button, the average value of all measurent
values of the current user will display with the average reading.
Use the Memory Function
16
To read the average value
...................................
“kPa”display “mmHg”display “IHB”display
SYS
mmHg
DIA
mmHg
PUL
/min
MEM
SET
Start/Stop
BPM165W
Measurement starts while inflating.
2
The hearbeat symbol “ ” flashes once a pulse is detected.
To a fit pressureContinue InflatingHeartbeat appearInflatingStart to inflate
Start to inflateAll symbols display
13
Proper Way of Measurement
Remove all clothes
from your arm allowing
the cuff to fit directly on
the skin.
1
Wrap the cuff tightly
around your wrist by
using the Velcro strip.
2
Sit in a chair with your feet flat on the floor.
3
0
1cm
(.4'')All display symbols appear.
14
Take a Measurement
Press the “Start/Stop” button.
1
the average value of
all measurent values
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL

The 1st latest
measurement value
The 2nd latest
measurement value The 90th latest
measurement value
.......
.......
Backward
Forward
17
Use the Memory Function
..............................................
To read the measurement value
18
Use the Memory Function
To delete the memory value
..............................................
In the memory reading mode, press the “MEM” button for 4-6 seconds, the unit will
display “ ”
Press the “MEM” button again and LCD will display “ ”.
If you are sure all the data of corresponding user can be deleted, press the
“Start/Stop” button, all the corresponding user’s data will be deleted and the
device will turn off.
Note: If you have set “ ”, but do not press a button for 2 minutes, the unit will
turn off automatically, but the corresponding user’s blood pressure data will
not be deleted. The delete operation must be confirmed by user.
Press the “MEM” button to display the set of measurement values with the
measuring date from the oldest to the most recent.
Press the “SET” button to display the next set of measurement values with the
measuring date from the most recent to the oldest.
Long press the button and the value quickly changes.
19
About Blood Pressure
Lower pressure
Relaxation of the
heart muscle
Pressure decreased
to the blood vessel
Blood return heart
Higher pressure
Contraction of
the heart muscle
Pressure increased
to the blood vessel
Extrude blood
Diastolic Blood PressureSystolic Blood Pressure
Blood Circulation
The blood circulation is responsible for supplying the body with oxygen.
Blood pressure is the pressure exerted on the arteries.
The systolic blood pressure value (higher pressure or top value) represents
the blood pressure produced by contraction of the heart muscle.
The diastolic blood pressure value (lower pressure or lower value) represents
the blood pressure produced by relaxation of the heart muscle.
20
About Blood Pressure
The incidence of hypertension increases with age. In addition, a lack of exercise,
excess body fat and high levels of cholesterol (LDL), which sticks to the inside in
blood vessels, reduces elasticity of these vessels. Hypertension accelerates arterial
sclerosis which can lead to very serious conditions such as stroke and myocardial
infarction. For these reasons it is very important to know whether the blood
pressure is within a healthy range. Blood pressure fluctuates from minute to minute,
throughout the day. Therefore it is essential to take regular measurements to help
you identify an average blood pressure.
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL
MEM
SET
Start/Stop
BPM165W
SYS
mmHg
DIA
mmHg
/min
PUL

21
About Blood Pressure
*Note!
When a person’s systolic and diastolic pressures fall into different categories, the
higher category should apply.
WHO
Red
Yellow
Green
80
85
90
100
110
Diastolic Blood Pressur (mmHg)
120 130 140 160 180
Systolic Blood Pressure (mmHg)
Optimal
blood pressure
(target value)
Normal blood pressure
Normal systolic value
Mild hypertension
Moderate hypertension
Severe hypertension
After each measurement is completed, the LCD display will show your position
automatically on the six segments of the bar indicator which corresponds to World
Health Organization (WHO) Blood Pressure Indicator.
Reference Material: Journal of Hypertension 1999, Vol 17 No.2
Classification of Blood Pressure
High blood pressure can go unnoticed
for a long time, since it doesn’t cause
noticeable symptoms. The following
are all possible causes of abnormally
high blood pressure:
Overweight;
High cholesterol level;
Smoking;
Excessive alcohol consumption;
Stress and emotional upset;
Excessive consumption of salt;
Lack of physical exercise;
Genetic / hereditary predisposition;
Underlying illnesses, such as kidney
disorders or endocrine disturbance.
If your blood pressure reaches upper
values of 140~160 mmHg and lower
values of 90~95 mmHg in repeated
measurements over several days, you
should consult your doctor for detailed
medical examination. You can assist
the treatment prescribed by your
doctor in the following ways:
Loose weight and lower your
cholesterol level;
Reduce the consumption of alcohol;
Reduce the intake of salt;
Stop smoking;
Take regular exercise;
Monitor your blood pressure.
22
About Blood Pressure
Classification of Blood Pressure
23
Exceptional Situations
Wrap the cuff correctly and tightly.
Inflate over again after ensuring.
Measure over again according to
correct way.
Do not move your arm and body,
and keep quiet.
When the batteries
power are too low.
The course of
inflating appears
error.
When measurement
fails.
Correction
CauseSymbol
Error Indicators
Replace both of the worn batteries
with two new ones.
24
Exceptional Situations
Blood pressure varies constantly. Many
factors including stress, time of day, how
you wrap the cuff, may affect your blood
pressure. Review the sections "Proper
Way of Measurement" and "Take a
Measurement".
Check the battery installation for proper
placement of the batteries polarities.
Measurement values
appear too high or too low.
No display appears on the
display screen.
No power.
Causes and Solutions
Problem
Eliminate Fault
Replace both of the worn batteries
with two new ones.
The following symbol will appear on the display when measuring abnormally.

27
Specifications
BPM165W
LCD Digital Display
Oscillometric Method
Measurable
Model No.
Display
Measuring Principle
Circumference of Wrist 13.5~21.5cm (5.3''~8.5'')
Electric Shock Protection
Measurement
Range
Accuracy Pressure
Pulse
Pressure
Pulse
Pressure 0 to 299 mmHg (0~39.9 kPa)
40 to180 Pulses/min
3 Digits Display of mmHg or kPa
3 Digits Display
Memory/IHB/Heartbeat/Low Battery,etc.
3 mmHg (0.4kPa)
5% of reading
Pulse
Internal power supply appliance type B
LCD
Indication Symbol
28
Specifications
Automatic by Internal Pump
Automatic by Air Valve
Approx. 110g (Batteries not included)
80~105 kPa
2 AAA Alkaline Batteries
Within 2 Minutes
Memory 90 Sets Measurement Values
Memory Function
Inflation
Power Source
Rapid Air Release
Automatic
Turn
Off
Gross Weight
10~40℃ (50 ~ 104 F )
-20~60℃
(-4 ~ 140 F )
15 ~ 90% RH
(Noncondensing)
10 ~ 95% RH
(Noncondensing)
Temperature
Humidity
Temperature
Humidity
Operating
Environment
Barometric Pressure
Storage
Environment
START/STOP
BPM165W
SET
MEM
START/STOP
BPM165W
SET
MEM
START/STOP
BPM165W
SET
MEM
START/STOP
SET
MEM
BPM165W
25
Care and Maintenance
Care
Avoid subjecting the monitor to strong shocks or vibrations, such as dropping
the nuit on the floor.
Use the unit consistent with the instructions provided in this manual.
Use only authorized parts and accessories.
Keep the unit in the storage case
when not in use.
Clean the unit with a soft dry cloth.
Do not use any abrasive or volatile
cleaners.
Never immerse the unit or any
components in water.
Maintenance
26
Care and Maintenance
naphtha
thinner gasoline
Store the unit in a clean and dry
location. Do not subject the unit to
extreme hot or cold temperature,
humidity and direct sunlight.
Remove the batteries if the unit will
not be used for 3 monthes or longer.
Always replace both of the batteries
with new ones at the same time.
Do not wet the cuff or attempt to clean
the cuff with water.
Do not clean the body and cuff with
naphtha, thinner or gasoline etc.

29
Statement
The intended use: The unit is intended to be used by adults at home or medical
centre to measure blood pressure and pulse rate.
The unit satisfies the requirements of IEC60601-1 Medical electrical equipment,
EN1060-1: Non-invasive sphygmomanometer, EN1060-3: Non-invasive
sphygmomanometer,IEC60601-2-30: Non-invasive sphygmomanometer.
The unit has passed the EMC Test.
Blood pressure measurements determined with this device are equivalent to
those obtained by a trained observer using the cuff/stethoscope auscultatory
method, within the limits prescribed by the American National Standard,
Manual, electronic, or automated sphygmomanometers.
The risk of patient and user can be lowered to acceptable level.
Substitution of a cuff different from that supplied might result in measurement error.
Please contact us if you need the circuit diagrams, component part lists etc.
Specifications are subject to change without notice due to improvements in
performance.
31
Warranty Information
Periodical check:
Sensitive measuring devices must be checked from time to time for accuracy
and leakage, we therefore recommend that the performance should be checked
every 2 years and after maintenance and repair.
Please contact the local distributor for details.
30
Warranty Information
Federal law restricts this device to sale by or on the order of a physician.
For repair under this warranty.Our authorized service agent must be advised of
the fault within the period of the warranty.This warranty covers parts and labor
only under normal operations.A transportation fee or freight fee that may be
incurred will be the owner’s responsibility.Any defect resulting from natural
causes, e.g.,flood,hurricane etc., is not within this guarantee.
This guarantee does not cover damage incurred by use of the unit not in
accordance with the instructions, accidental damage, or being tampered with or
serviced by unauthorized service agents.
The unit, excluding the unit cuff, is guaranteed to be free of defects in
workmanship and materials for a period of two years from the date listed on the
purchase record, when used in accordance with the instructions provided with the
unit.The unit cuff is warranted to be free from defects in materials and
workmanship appearing within one year from the date listed on the purchase
record when the unit is used in accordance with the instructions provided with the
unit.
Unit subjected to misuse, abuse, and neglect of these manual contents,
non-instructional purposes;unauthorized repair or modifications will be excluded
from this warranty. This guarantee specifically excludes expendables and
consumables, for example batteries.All warranty claims must be directed to the
distributor responsible for the sale of the device. The content of this warranty is
subject to change without further notice.